Tender For Construction Of Dress Changing Room & Wash Rooms For Workmen In Ga-I, Ga-Ii & T-90 At Hvf, Avadi.
Tender Value
1.88 Crore
Estimated cost
Bid Submission
24 Sep 2026
11 days left
EMD
2.64 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Dress Changing Room & Wash Rooms For Workmen In Ga-I, Ga-Ii & T-90 At Hvf, Avadi.
BOQ
| Sl. No. | Item Description |
| 1 | Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m |
| 2 | M & L for surface excavation of hard/dense soil not exc 30cm deep and averaging 15cm deep and getting out |
| 3 | Excavating in hard/dense soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out. |
| 4 | Material and labour for Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. |
| 5 | M & L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface |
| 6 | Material and labour for sand filling under floors or in foundation including watering and consolidation. |
| 7 | M & L for P.C.C 1:3:6, C-2 type using 40mm graded aggregated in foundation, grouting of steel structures, filling and mass concrete. |
| 8 | M & L for providing RCC M20 Concrete (1:1.5:3) in Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete |
| 9 | M & L for providing RCC M20 Concrete (1:1.5:3) in Columns, pillars, piers, posts and struts |
| 10 | M & L for providing RCC M20 Concrete (1:1.5:3) in Beams, cantilever bressummers, lintels over 1.5m span |
| 11 | M & L for providing RCC M20 Concrete (1:1.5:3) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 12 | M & L for Formwork (FLAT)to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces. |
| 13 | M & L for Formwork (square, rectangular) to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces |
| 14 | M & L for Formwork(flat) to floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces |
| 15 | M & L for Formwork (flat) to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces |
| 16 | M & L for Damp proof course in Cement concrete 1:2:4 type B0, 40 mm thick to horizontal or vertical surfaces including necessary formwork |
| 17 | M & L for Cement concrete in foundations, filling and mass concrete type B1 1:2:4 using 20mm graded aggregate. |
| 18 | M & L For precast cement concrete set in cement mortar 1:6 type B1 (1:2:4) 20mm graded aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces. |
| 19 | S & F of Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, Bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 20 | Supply and fixing of mild steel reinforcement TMT bars 8mm dia to 6 mm dia, cut to length, bent to shape required, including cranking, Bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 21 | M & L for Brickwork built in CM 1:6 using subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius. |
| 22 | M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 |
| 23 | Material & labour for cement plastering with CM(1:4) 15 mm thick wall plastering. |
| 24 | Material & labour for plastering with CM(1:4) 12mm thick ceiling plastering. |
| 25 | Material and labour for applying two coats of Exterior emulsion on new External wall /ceiling surfaces with priming the surface. all complete (MAKE:- ASIAN paint ,NEROLAC & BERGER or Suitably equivalent make) |
| 26 | S & F Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, Joint free non skid tiles and screed bed layer in cement mortar 1:4 15 mm thick for laying floor finishes. |
| 27 | M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm , in floors/wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bedding in CM 1:4, 25mm thick for laying floor finishes. |
| 28 | S & F of coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bedding in CM 1:4, 25mm thick for laying floor finishes. |
| 29 | Supply and fixing of Cement concrete Tiles 20cmx20cmx20mm thick with white cement and pigment machine pressed with screed bed or bedding layer in CM 1:3 , 15mm thick and pointed in neat cement slurry in floors and cut polished. |
| 30 | Supply and fixing factory made uPVC white colour Two track two panels sliding window upto 1.50 mheight made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by EIC. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5 % tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. |
| 31 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 32 | S & F of 5.5mm Sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 sq. m in each pane as required and Extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one side. |
| 33 | Supply and fixing of SS wire cloth, nominal dia 0.36mm of wire and average width of apexture 1.40mm and fixed to wooden works as specified and directed. |
| 34 | Supply and Fixing of Aluminium Hollow section for windows size 20mm x10mm rectangular hollow sections with necessary corner, pvc hinges, pvc handles, pvc stoppers, corner brackets, intermediate sash bars etc all complete and as directed. |
| 35 | Supply and Fixing of Powder coated Aluminium Shutter section of Size 16mm x9mm rectangular hollow sections with necessary corner brackets , intermediate sash bars etc all complete and as directed. |
| 36 | S & F of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops,hand made sliding bolts, etc conforming to Fe.290.Gde-E-16 |
| 37 | Supply and fixing of 45x70 mm Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory Windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per Direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. |
| 38 | S & F of 30mm thick main door design engraved factory made single extruded WPC(wood polymer composite) solid plain flush door shutter or required size comprising of virgin polymer of k value 58-60(suspension grade), calcium carbonate and natural fiber(wood powder)/rice husk/wheat husk and non toxic additives(maximum toxicity index of 12 for 100mgs) having minimum density of 650kg/cum, screw withdrawal strength of 1800N (face)& 900N (edge) minimum compressive strength of 50N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star head counter sunk SS screws, all as per direction of engineer-in-charge. |
| 39 | S & F of 30mm thick factory made extruded WPC (Wood Polymer Composite) solid plain flush door shutter or required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fiber (wood powder)/rice husk/wheat husk and non toxic additives (maximum toxic index of 12 for 100grms ) having minimum density of 650kg/cum, screw withdrawal 1800N(face) & 900N (edge) minimum compressive strength of 50N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof of required size with necessary full body threaded star head counter sunk SS screws, all as per direction of Engineer in-charge. |
| 40 | Supply and fixing of 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 41 | S & F of aluminium(die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed |
| 42 | S & F Of Aluminium anodised, barrel tower bolts 150mm of extruded section and fixed. |
| 43 | S & F of butt hinges 125mm cast brass with mild steel hinge pin, bright polished and fixing but type B-12. |
| 44 | S & F of 150mm Aluminium handles, cast Type, anodised. |
| 45 | S & F Aluminium alloy 250mm length, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 46 | M & L for PVC (SWR) 75mm outlet dia floor trap, plain with grating including jointing with solvent cement. |
| 47 | M&L for PVC(SWR) gully trap 125/110 mm, setting and jointing with solvent cement. |
| 48 | S & F of Vitreous China wash basin, white, flat back or angle back type, size 580x450 including cutting for and pinning in ends of brackets or erecting stand and 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed and 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 49 | S & F of IWC Squatt pan (Orissa pattern) Size 580 x 440mm white / colour with integral foot rests providing lime concrete bedding and finishing the top and PVC valveless 10 litre, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets etc., |
| 50 | Supply of EWC with \\"P\\" or \\"S\\" trap including bedding valveless symphonic action type 10 litres flushing cistern, low level, white with inlet, ball valve, float and handle including brackets Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and etc., |
| 51 | Supply and fixing of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 52 | Supply and fixing of 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup (concealed type) |
| 53 | S & F of vitreous china urinals, half stall type flat back of white including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinal back in cement. Including 32mm connector pipe, stop cock 15mm size with PTMT nuts 15mm PVC connections of length 300mm and waste coupling and removing old damaged urinal, 15mm dia pipe urinal spreader Minimum weight 60gms complete etc |
| 54 | M & L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 55 | Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machinepolishing to edge to give high gloss finish etc. complete. |
| 56 | S & F of 15mm fancy type bib tap of bore dia of 15mm pipe standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs. (Minimum weight 15mm-90gms/20mm-125gms). ) |
| 57 | Supply and Fixing of swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) |
| 58 | S & F of Shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour.(Minimum weight 40gms) |
| 59 | Supply and Fixing of Soap dish, vitreous China white, approximate size 160x160x90mm fixed to plugs with chromium plated brass screws. |
| 60 | S & F of Looking Mirror of any size as required at site selected quality glass, mount on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass. |
| 61 | Supply and fixing of Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) |
| 62 | S & F of 1000 litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified. |
| 63 | S & F of 20mm ball valves set ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm- 690 gms) |
| 64 | S & F of Gun-metal (32mm),globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
| 65 | Cutting chases, pinning in brick walls making good to facings Where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, Shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 66 | S & F of Unplasticised PVC pipes 50mm dia of pressure rating 10 kgf/cm2 laid in trenches |
| 67 | Supplying and laying of CPVC pipes 32mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/celling or laying in floors or in trenches complete all as specified. |
| 68 | Supplying and laying of CPVC pipes 20mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/celling or laying in floors or in trenches complete all as specified. |
| 69 | Supplying and laying of CPVC pipes 16mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/celling or laying in floors or in trenches complete all as specified. |
| 70 | S & F of PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints laid in trenches or in floor. |
| 71 | S & F of PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints fixed to floor. |
| 72 | S & F of PVC 110mm dia pipes single sockets, in any length with rubber ring joints fixed to wall. |
| 73 | S & F of PVC bend with door 75mm dia any radius provided with access door. |
| 74 | S & F of PVC bend with door 110mm dia any radius provided with access door. |
| 75 | S & F of PVC (SWR) vent cowl 75 mm dia. |
| 76 | S & F of PVC (SWR) 75mm junction single, (Single T) equal or Unequal |
| 77 | Supply and Application of seamless Polyurethane (PU) based elastomeric coating exposable to atmosphere. The work consisting a) Supply & Application of PU based primer minimum of 100 grms per SQM b) Supply and Application of seamless PU based elastomeric coating over a primer coat to achieve a thickness of 1.50mm DFT in two coats, with an application rate of minimum 2.1kg/sq.m, Having minimum solid content (ASTM 836) of more than 85% and elongation also more than 400% c)) Supply & application of protective UV top coat @ 0.25kg/sq.m (The contractor shall use material from the reputed manufacturers such as \\"Master Builders Solutions\\" \\"MYK Arment\\" \\"DR fixit\\" Alchimice, bostik and Tecnopol or suitably equivalent make only as approved by EIC). |
| 78 | M & L for painting to steel surfaces of any description, over 10cm in width or girth with two coats of synthetic enamel paint over a coat of red oxide primer including preparing new surfaces. |
| 79 | M & L for 225mm Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required |
| 80 | S & F of PVC pipe of 160mm dia to walls/roof (10kg/cm2) in trenches including fittings like clamps, bend, tee, etc. as directed and approved by considering the dimensions & height not exc 20m approx. including all necessary scaffolding and safety aspects. Complete as required at site. |
| 81 | M & L for Concrete bed to drain pipes(150mm) PCC 1:3:6 Type C2 including packing under, and haunching against the sides of pipes after they are laid and tested; |
| 82 | Returning, filling in hard/dense soil including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 83 | Removal of excavated soil debris materials to a lead exceeding 250 m but not exceeding 500 m and depositing where directed including, spreading & levelling |
| 84 | Material and labour for Point wiring with PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including same size copper earth continuity wire. a)one light point or one fan point controlled by one switch with cables 1.5 sqmm size. |
| 85 | Material and labour for Point wiring with PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including same size copper earth continuity wire. b)One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sqmm size. |
| 86 | Material and labour for Point wiring with PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including same size copper earth continuity wire. c)One 3 pin socket outlet 5 amps on independent with cables 2.5 sqmm size. |
| 87 | Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit a) 2x2.5 sqmm + 1x2.5 sqmm earth wire |
| 88 | Material & Labour for connecting to the system modular type switches 6A single pole one way one module (Make:,LEGRAND /ANCHOR/ Litaski/ Crabtree or Suitably equivalent make) |
| 89 | Supply, fixing and connecting to the system of socket, 6A-2/3 pin combined modular type 2 module (Make:,LEGRAND MYRIUS/ Litaski/ Crabtree or Suitably equivalent make) |
| 90 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete (Make: Havells/ Philips/ Wipro/ Bajaj/ CG/ Luker) or Suitably equivalent make |
| 91 | Supply and fixing of exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers |
| 92 | Supply and fixing ceiling fans complete with blades, down rods, electronic Regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star, rated Copper winding with brushless direct current motor (BLDC) Make: HAVELLS/CGL/AUTOMBURG/LUKOR or suitable equivalent make as approved by EIC |
| 93 | Supply and fixing of modular Fan step regulator, 120W - 2 module |
| 94 | Supply & fixing of 3 module modular white cover plate with frame |
| 95 | Supply & fixing of modular metal flush box for 3 module plate |
| 96 | Supply & fixing of 6 module modular white cover plate with frame |
| 97 | Supply & fixing of modular metal flush box for 6 module plate |
| 98 | Supply & Fixing of 12 module, polycarbonate modular white cover plate with frame and metal flush box. Make: Anchor/Havells/Legrand or suitably equivalent make. |
| 99 | Supply & Fixing of modular type Dummy plate. |
| 100 | Material & Labour for ceiling rose, 3 Phase/PVC/polycarbonate, isolated body. |
| 101 | Supply, fixing and connecting to the system of sheet metal enclosures with double door DB,s 240V when MC's to be used single pole & neutral 4 way with 200 Amps rated busbar, (Make: Legrand/Havells/ Hager/ABB) or Suitably equivalent make |
| 102 | Supply, fixing & connecting to the system of Sheet metal enclosures with double door DB's 415 V when MCB'S to be used triple pole & neutral 4 way(suitable for Incoming 4 pole MCB and outgoing 4 Nos of single pole MCB each phase) with 200 amps rated busbar, (Make: Legrand/Havells/ Hager/ABB) or Suitably equivalent make |
| 103 | Supply and fixing of SP 6 to 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (Make: ABB/Legrand/ Havells/Hager) or Suitably equivalent make |
| 104 | Supply and fixing 240V 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 AMP current carrying capacity, in the MCB DB complete with connection testing and commissioning. |
| 105 | Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 32 AMP current carrying capacity, in the MCB DB complete with connection testing and commissioning. |
| 106 | Excavating in trenches hard / dense soil not exceeding 1.5m wide and not exceeding 1.5m in depth for laying cable. |
| 107 | Material and labour for sand filling for cushioning on UG cable. |
| 108 | Material and labour for bricks; common burnt clay building bricks sub class B designation 75, Old size bricks for protection t o U.G. Cable. |
| 109 | Returning, refilling in the excavated trench after laying of power cable including spreading, levelling, watering and well ramming in layers not exceeding 25 cm. Hard / dense soil. |
| 110 | Materials & labour for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm, 4 core |
| 111 | Material & Labour for LT cable end termination with gland and copper lugs suitable for 4 core 25 sqmm XLPE cable. |
| 112 | Demolition of cement concrete (unreinforced) of any description and in any position |
| 113 | Material and labour for cement concrete 1:2:4 Type B1 using 20mm graded aggregate in foundations, filling and mass concrete |
| 114 | Material and labour for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including earth electrode pipe, Funnel, charcoal, salt, earth PCC pit with cover and testing on completion. |
| 115 | Material and labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 6mm dia galvanised iron or steel wire. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender