Tender For Renovation To Bpd Building (75 Years Old, Raja Of Mysore Gifted Building To Iihr Size 22.40 Mt X 7.11 Mt) At Block-I Under Bpd Funds At Icar-Iihr-Bengaluru
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Sep 2026
2 days left
EMD
45000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation To Bpd Building (75 Years Old, Raja Of Mysore Gifted Building To Iihr Size 22.40 Mt X 7.11 Mt) At Block-I Under Bpd Funds At Icar-Iihr-Bengaluru
BOQ
| Sl. No. | Item Description |
| 1 | Unit-I (size 40 f x 25 f x one side 10 ft and ne side 9f ht one side sloping roof ) |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) for foundation base ,floor, plinth protection |
| 4 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for plinth beam |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-1:2:4 (1 cement:2 coarse sand(zone-Ill) derived from naturalsources:4gradedstoneaggregate 20mmnominal size derived from natural sources)plinth concrete |
| 7 | Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m all kinds of soil |
| 8 | Providing and constructing concrete block masonry using 150x200x400 mm solid core compact concrete block (Grade C – 50Kg/Cm2) in CM 1:6 including all scaffolding, curing, etc. complete for walls |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- 1:3:6(1Cement:3coarsesand (zone-Ill) derived from natural sources:6gradedstoneaggregate 20mmnominal size derived from natural sources) on stone work and for plinth , for floors |
| 10 | Providing Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster |
| 11 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc. complete. For roof purlins , grill to floor , truss , vertical member |
| 12 | Providing and fixing precoated galvanized steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete tiled shaped as per approved sample for roof and side from top cladding |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Asian Tractor / Jonson Nicholson / Berger) |
| 14 | Supplying and fixing with close nit SS mesh as per approved sample for aluminium shutters |
| 15 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners all necessary fittings complete, including applying a priming coat of Usingflats30x6mmfordiagonalbracesandcentralcross piece |
| 16 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Water thinnable cement primer |
| 17 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Asian Tractor / Jonson Nicholson/Berger) |
| 18 | Supplying and fixing 1’’ x 1’’ weld mesh as per approved sample including welding cutting and grinding for top air ventilation |
| 19 | Providingandfixingflatpressedthreelayerparticleorgradedplainwood board medium density exterior grade(GradeI) FPT-1, conforming and marked to frame ,backing or studding with screws etc. complete(Frames backing or studding to be paid separately): 18 mm thick |
| 20 | Supplying and fixing decorum sheet as per approved brand sample |
| 21 | Unit-II (size 20 f x 15 f x one side 10 ft and ne side 9f ht one side sloping roof ) |
| 22 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil |
| 23 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) for foundation base ,floor, plinth protection |
| 24 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form for plinth beam |
| 26 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-1:2:4 (1 cement:2 coarse sand(zone-Ill) derived from naturalsources:4gradedstoneaggregate 20mmnominal size derived from natural sources)plinth concrete |
| 27 | Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m all kinds of soil |
| 28 | Providing and constructing concrete block masonry using 150x200x400 mm solid core compact concrete block (Grade C – 50Kg/Cm2) in CM 1:6 including all scaffolding, curing, etc. completeFor walls |
| 29 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- 1:3:6(1Cement:3coarsesand (zone-Ill) derived from naturalsources:6gradedstoneaggregate 20mmnominal size derived from natural sources) on stone work and for plinth , for floors |
| 30 | Providing Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floatingcoat of neat cement. 12 mm cement plaster |
| 31 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc. complete. For roof purlins , grill to floor , truss , vertical member |
| 32 | Providing and fixing precoated galvanized steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete tiled shaped as per approved sample for roof and side from top cladding |
| 33 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Asian Tractor / Jonson Nicholson / Berger) |
| 34 | Supplying and fixing with close nit SS mesh as per approved sample for aluminium shutters |
| 35 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners all necessary fittings complete, including applying a priming coat of Usingflats30x6mmfordiagonalbracesandcentralcross piece |
| 36 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface Water thinnable cement primer |
| 37 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Asian Tractor / Jonson Nicholson/Berger) |
| 38 | Supplying and fixing 1’’ x 1’’ weld mesh as per approved sample including welding cutting and grinding for top air ventilation |
| 39 | Providingandfixingflatpressedthreelayerparticleorgradedplainwood board medium density exterior grade(GradeI) FPT-1, conforming and marked to frame ,backing or studding with screws etc. complete(Frames backing or studding to be paid separately): 18 mm thick |
| 40 | Supplying and fixing decorum sheet as per approved brand sample |
| 41 | Providingandfixingflatpressedthreelayerparticleorgradedplainwood board medium density exterior grade(GradeI) FPT-1, conforming and marked to frame ,backing or studding with screws etc. complete(Frames backing or studding to be paid separately): 18 mm thick |
| 42 | Supplying and fixing decorum sheet as per approved brand sample Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender