Supply Of Manufacturing and Supply of complete set of Inspection Gauges

Sharing tender

Supply Of manufacturing and supply of complete set of inspection gauges , manufacturing and supply of complete set of inspection gauges as per rdso drg. no. t-900 3 (part) (alteration 03) for 10125 mm curved switch with 60e1 a1 thick web tongue rails for 1 in 12 turn out b.g (1673 mm) for 60e1 rail on psc sleeper to rdso drg. no. rt-6155 along with testing and calibratio n by any government approved lab or by any nabl accredited labs and confirming to specification, materia l: 3 mm thick tool steel plate of grade tc-3 (table-1) of is: 1570 (part-6) or equivalent or higher hardness . the gauges are to be supplied in in a wooden case. one set consist of:- (i) gauge no. 1/a - end templates at actual toe of switch (for right side tongue rail) (ii) gauge no. 1/b- end templates at actual toe of swit ch (for left side tongue rail) (iii) gauge no. 2/a & 2/b- head width checking gauge at point h (2678mm f rom ats)(22 mm head thickness) (iv) gauge no. 2/1- head width checking combined gauge at point h (2 678mm from ats) (22 mm head thickness) (v) gauge no. 3/a & 3/b - head width checking gauge at point g (4958mm from ats) (55 mm head thickness) (vi) gauge no. 3/1- head width checking combined gaug e at point g (4958mm from ats) (55 mm head thickness). [ warranty period: 30 months after the date of delivery ] ] , manufacturing and supply of complete set of inspection gauges as per rdso drg. no. t-900 2 (part) (alteration 02) for 6400 mm curved switch with 60e1 a1 thick web tongue rails for 1 in 8.5 turno ut b.g (1673 mm) for 60e1 rail on psc sleeper to rdso drg. no. rt-6280 along with testing and calibration by any government approved lab or by any nabl accredited labs and confirming to specification, material: 3 mm thick tool steel plate of grade tc-3 (table-1) of is: 1570 (part-6) or equivalent or higher hardness. the gauges are to be supplied in in a wooden case. one set consist of:- (i) gauge no. 1/a & 1/b - end templ ates at actual toe (ii) gauge no. 2/a & 2/b- head width checking gauge at point h (22 mm head thicknes s) (iii) gauge no. 2/1- head width checking gauge at point h (22 mm head thickness) (iv) gauge no. 3/a & 3/b - head width checking gauge at point g (55 mm head thickness) (v) gauge no. 3/1- head width c hecking gauge at point g (55 mm head thickness). [ warranty period: 30 months after the date of deliv ery ] ] , manufacturing and supply of complete set of inspection gauges as per rdso drg. no. t-900 3 (part) (alteration 03) for 10125 mm curved switch with 60e1 a1 thick web tongue rails for 1 in 12 turn out b.g (1673 mm) for 60e1 rail on psc sleeper to rdso drg. no. rt-6155 along with testing and calibratio n by any government approved lab or by any nabl accredited labs and confirming to specification, materia l: 3 mm thick tool steel plate of grade tc-3 (table-1) of is: 1570 (part-6) or equivalent or higher hardness . the gauges are to be supplied in in a wooden case. one set consist of:- (i) gauge no. 1/a - end templates at actual toe of switch (for right side tongue rail) (ii) gauge no. 1/b- end templates at actual toe of swit ch (for left side tongue rail) (iii) gauge no. 2/a & 2/b- head width checking gauge at point h (2678mm f rom ats)(22 mm head thickness) (iv) gauge no. 2/1- head width checking combined gauge at point h (2 678mm from ats) (22 mm head thickness) (v) gauge no. 3/a & 3/b - head width checking gauge at point g (4958mm from ats) (55 mm head thickness) (vi) gauge no. 3/1- head width checking combined gaug e at point g (4958mm from ats) (55 mm head thickness). [ warranty period: 30 months after the date of delivery ] ] , manufacturing and supply of complete set of inspection gauges as per rdso drg. no. t-621 5 (part) (alteration-05) for 10125mm over riding fan shaped switch (curved) b.g for 60 e1 rail on psc sle epers to rdso drg. no. t-4219 along with testing and calibration by any government approved lab or by an y nabl accredited labs and confirming to specification, material: 3 mm thick tool steel plate of grade tc-3 (table-1) of is: 1570 (part-6) or equivalent of higher hardness. the gauges are to be supplied in in a wood en case. one set consists of:- (i) gauge no. 1/a- end template-z at point r (ats) (for right side tongue ra il) (ii) gauge no. 1/b- end template-z at point r (ats) (for left side tongue rail) (ii) gauge no. 2- under c utting of tongue rail foot at ats (iii) gauge no. 3 - 13 mm head thickness (at 1682 mm from ats) (iv) ga uge no. 6 -12r toe radius at ats (v) gauge no. 35- tongue rail head thickness (at 4244mm from ats). [ warranty period: 30 months after the date of delivery ] ] , manufacturing and supply of complete set of inspection gauges as per rdso drg. no. t-621 3 (part) (alt. 03) for 6400 mm over riding fan shaped curved switch b.g for 60e1 rail on psc sleeper to r dso drg. no. rt-4966 for use indepot along with testing and calibration by any government approved lab o r by any nabl accredited labs and confirming to specification, material: 3 mm thick tool steel plate of grad e tc-3 (table-1) of is:1570 (part-6) or equivalent of higher hardness. the gauges are to be supplied in in a wooden case. one set consist of: (i) gauge no. 1/a - end templates y at point r (ats) (for right side ton gue rail) (ii) gauge no. 1/b - end templates y at point r (ats) (for left side tongue rail) (iii) gauge no. 2 - under cutting of tongue rail foot (iv) gauge no. 3 - 13 mm head thickness (at 476.5 mm from ats) (v) ga uge no. 6- 12r toe radius at ats (vi) gauge no. 33- tongue rail head thickness (at 2348 mm from ats). [ warranty period: 30 months after the date of delivery ] ] , manufacturing and supply of complete set of inspection gauges as per rdso drg. no. t-621 5 (part) (alteration-05) for 10125mm over riding fan shaped switch (curved) b.g for 60 e1 rail on psc sle epers to rdso drg. no. t-4219 along with testing and calibration by any government approved lab or by an y nabl accredited labs and confirming to specification, material: 3 mm thick tool steel plate of grade tc-3 (table-1) of is: 1570 (part-6) or equivalent of higher hardness. the gauges are to be supplied in in a wood en case. one set consists of:- (i) gauge no. 1/a- end template-z at point r (ats) (for right side tongue ra il) (ii) gauge no. 1/b- end template-z at point r (ats) (for left side tongue rail) (ii) gauge no. 2- under c utting of tongue rail foot at ats (iii) gauge no. 3 - 13 mm head thickness (at 1682 mm from ats) (iv) ga uge no. 6 -12r toe radius at ats (v) gauge no. 35- tongue rail head thickness (at 4244mm from ats). [ warranty period: 30 months after the date of delivery ] ] , manufacturing and supply of complete set of inspection gauges as per rdso drg. no. t-621 3 (part) (alt. 03) for 6400 mm over riding fan shaped curved switch b.g for 60e1 rail on psc sleeper to r dso drg. no. rt-4966 for use indepot along with testing and calibration by any government approved lab o r by any nabl accredited labs and confirming to specification, material: 3 mm thick tool steel plate of grad e tc-3 (table-1) of is:1570 (part-6) or equivalent of higher hardness. the gauges are to be supplied in in a wooden case. one set consist of: (i) gauge no. 1/a - end templates y at point r (ats) (for right side ton gue rail) (ii) gauge no. 1/b - end templates y at point r (ats) (for left side tongue rail) (iii) gauge no. 2 - under cutting of tongue rail foot (iv) gauge no. 3 - 13 mm head thickness (at 476.5 mm from ats) (v) ga uge no. 6- 12r toe radius at ats (vi) gauge no. 33- tongue rail head thickness (at 2348 mm from ats). [ warranty period: 30 months after the date of delivery ] ] , manufacturing and supply of complete set of inspection gauges as per rdso drg. no. t-900 2 (part) (alteration 02) for 6400 mm curved switch with 60e1 a1 thick web tongue rails for 1 in 8.5 turno ut b.g (1673 mm) for 60e1 rail on psc sleeper to rdso drg. no. rt-6280 along with testing and calibration by any government approved lab or by any nabl accredited labs and confirming to specification, material: 3 mm thick tool steel plate of grade tc-3 (table-1) of is: 1570 (part-6) or equivalent or higher hardness. the gauges are to be supplied in in a wooden case. one set consist of:- (i) gauge no. 1/a & 1/b - end templ ates at actual toe (ii) gauge no. 2/a & 2/b- head width checking gauge at point h (22 mm head thicknes s) (iii) gauge no. 2/1- head width checking gauge at point h (22 mm head thickness) (iv) gauge no. 3/a & 3/b - head width checking gauge at point g (55 mm head thickness) (v) gauge no. 3/1- head width c hecking gauge at point g (55 mm head thickness). [ warranty period: 30 months after the date of deliv ery ] ] , manufacturing and supply of complete set of inspection gauges as per rdso drg. no. t-900 2 (part) (alteration 02) for 6400 mm curved switch with 60e1 a1 thick web tongue rails for 1 in 8.5 turno ut b.g (1673 mm) for 60e1 rail on psc sleeper to rdso drg. no. rt-6280 along with testing and calibration by any government approved lab or by any nabl accredited labs and confirming to specification, material: 3 mm thick tool steel plate of grade tc-3 (table-1) of is: 1570 (part-6) or equivalent or higher hardness. the gauges are to be supplied in in a wooden case. one set consist of:- (i) gauge no. 1/a & 1/b - end templ ates at actual toe (ii) gauge no. 2/a & 2/b- head width checking gauge at point h (22 mm head thicknes s) (iii) gauge no. 2/1- head width checking gauge at point h (22 mm head thickness) (iv) gauge no. 3/a & 3/b - head width checking gauge at point g (55 mm head thickness) (v) gauge no. 3/1- head width c hecking gauge at point g (55 mm head thickness). [ warranty period: 30 months after the date of deliv ery ] ]