Tender For Construction Of P.H. Section Office Building At Bargarh
Tender Value
30.32 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
14 days left
EMD
30320
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of P.H. Section Office Building At Bargarh
BOQ
| Sl. No. | Item Description |
| 1 | Design , Drawing and Construction of RCC Frame structure with brick work wall single stored building with double storyed foundation for section office with Plastering ,putty,Painting,Plinth protection, door,window as complete as per drawing and specification and direction of engineer - in - charge. |
| 2 | Supplying & fitting,fixing of vitrified tiles in floor of size 600mm x 600mm of approved make conforming to IS:13755 laid on 20mm thick cement mortar(1:4)(1 cement +4 course sand) and filling joints with white cement of approved quality including cost of all materials,conveyances, royalty,contractor profit & labour cess etc all complete as per the direction of Engineer-in-charge )(with Vetrified Tiles(600x600mm Plain Ivory)Extra For vitrified Tile(600mmx600mm) Flooring of Section office building |
| 3 | Supplying all materials, labour, T&P and fixing of vitrified tiles in dados,skirtting and risers of steps on 12mm thick bed of cement plaster (1:3) jointed with cement slurry mixed pigment to match the shades of the tiles including rubbing and polishing etc. Complete after providing a base plaster of 12mm thick in cement mortar (1:4) including cost of tiles ,conveyance, ,contractor profit & labour cess etc all complete as per the specification and the direction of engineer-in-charge.(tiles of approved shades to be used)Extra For vitrified Tile dado of Section office building |
| 4 | P.H WORK Supplying all materials, labour, T&P and Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid for separately) as per specification ,contrator profit & labour cess as per specification and direction of Engineer-in-charge. |
| 5 | Porcelain E.W.C. with P-trap |
| 6 | Single Piece Suite Omega C8906 (S-300) (695 x 385 X 770mm) white (Make-Parryware) |
| 7 | Supplying all materials, labour, T&P and fitting and fixing CP Health Foucet with 1.0 mtr PVC Tube as per specification including contractor profit & labour cess etc all complete as per the direction of Engineer-in--charge.(Ref :-PH AR-2013(BIB COCK) |
| 8 | CP Health Faucet with 1.0 mtr PVC Tube |
| 9 | Supplying all materials, labour, T&P and fitting and fixing brass screw-down Bib-Cocks(Taps) polished bright conforming to IS:781-1995 of the following nominal size as per specification including contractor profit & labour cess etc all complete as per the direction of Engineer-in--charge. |
| 10 | 15mm dia C.P. Long body bib cock |
| 11 | Supplying all materials, labour, T&P and fitting and fixing brass screw-down Bib-Cocks(Taps) polished bright conforming to IS:781-1995 of the following nominal size as per specification including contractor profit & labour cess etc all complete as per the direction of Engineer-in--charge. |
| 12 | 15mm dia C.P. short body bib cock |
| 13 | Supplying all materials, labour, T&P and fitting and fixing brass screw-down Bib-Cocks(Taps)/Sink Cock polished bright conforming to IS:781-1995 of the following nominal size as per specification including contractor profit & labour cess etc all complete as per the direction of Engineer-in--charge. |
| 14 | 15mm dia C.P. Sink cock |
| 15 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/ 89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor including cost of all materials,conveyance to worksite,contractor profit & labour cess etc all complete and direction of Engineer-in-charge. |
| 16 | 25mm PVC sch-80 pipes |
| 17 | 20mm PVC sch-80 pipes |
| 18 | 32mm PVC sch-80 pipes |
| 19 | Supplying all materials,labour,T&P and laying in trenches unplasticated PVC pipes conforming to IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement bu non-heat application method including testing, contractor profit & labour cess etc as per specification complete (Earth work in trenches to be measured and paid for separately) including cost of pipe,conveyance of pipe to worksite ,contractor profit & labour cess as per direction of Engineer-In-charge. |
| 20 | 110mm dia rigid UPVC pipe Class-3 (0.60 mpa) |
| 21 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes |
| 22 | 110mm OD P.V.C. SWR S/S Pipe (ISI type-B) |
| 23 | Supplying & fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge. |
| 24 | 1000 litre capacity 3 - Layer White Rotational Moulded Cylinderical Vertical water storage tanks (ISI marked) |
| 25 | Supplying all materials, labour, T&P and Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. as per specification including contrator profit & labour cessand direction of Engineer-in-charge |
| 26 | 10 litr pvc low level cistern with fittings |
| 27 | Supplying all materials,labour,T&P and Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm or 340x410x265 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification. |
| 28 | Porcelain Flat back standing Urinal (Small) 430 x 260 x 350 |
| 29 | Supplying all materials, labour, T&P and Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of Engineer-in-charge. |
| 30 | W.H.B- Cosmos C0175*(SP) (445 x 310 x 200mm) Neutral Make-Parryware |
| 31 | Supplying all materials, labour, T&P and Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification ,contrator profit & labour cess as per specification and direction of Engineer-in-charge. |
| 32 | Porcelain 23\\" I.W.C.(Orissa Pan) |
| 33 | Supplying all materials, labour, T&P and Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required |
| 34 | 24\\"x 18\\"x10\\" Porcelain sink |
| 35 | Supplying, fitting & fixing of P.H Fittings & P.V.C. Special ,electrical items etc.all complete as per the direction of Engineer-in-charge. |
| 36 | 15 mm CP 2 in 1 Bib cock . |
| 37 | 25mm diaBrass/GM Ball Valve (ISI Marked) |
| 38 | C.P.revolving shower with arm (overhead) |
| 39 | 15mm dia C.P.angular stop cock |
| 40 | C.P.grating |
| 41 | Soap dish /Oval |
| 42 | Frammed Mirror |
| 43 | C.P. towel ring. |
| 44 | C.P. towel rail.(600x20)mm |
| 45 | 15mmx600mm PVC connection pipe |
| 46 | 32 mm syntex Nipple |
| 47 | 32mmx 1150mm long PVC waste pipe |
| 48 | 25mm PVC Elbow |
| 49 | 110mm PVc BEND |
| 50 | 110mm PVC Nanhi Trap |
| 51 | 110mm PVC Ptrap |
| 52 | Supplying all materials, labour, T&P Construction of 20 users Septic tank (internal size 2.30 x 1.10 x(1.80+0.30) including conveyance of all materials to work site,contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge. |
| 53 | Supplying all materials, labour, T&P Const. of Circular soak pit. size-1.20m dia x 2.00m depth including conveyance of all materials to work site,contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge. |
| 54 | Supplying all materials, labour, T&P const. of Brick masonry MH chamber of size- 900mmx800mmx450mm deep-type-A including conveyance of all materials to work site,contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge. |
| 55 | Supplying all materials, labour, T&P Construction of Brick masonry IC of internal Size- 0.75x0.75x0.45m including conveyance of all materials to work site,contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge. |
| 56 | Supplying all materials labour & T&P for constructing of brick masonry gully trap chambers earth work in excavation in all kinds of soil, 250mm thick fly ash work in C.M. (1:5) with fly ash. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punning including cost of SFRC cover slab etc. all complete as per approved P.H.E.D. specification and direction of Engineer-in-charge. |
| 57 | Supplying all materials, labour, T&P and fixing Ceramic floor tiles using tile 30cm x 30cm or 40cm x 40cm in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to matching shades of the tiles including rubbing and polishing ,contractor profit & labour cess all complete as per direction of Engineer-in-Charge |
| 58 | Supplying all materials, labour, T&P and fixing Ceramic floor tiles using tile 30cm x 30cm or 40cm x 40cm in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to matching shades of the tiles including rubbing and polishing ,contractor profit & labour cess all complete as per direction of Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
TodaySep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender