Tender For General-Cpp-Np-(2026-27)--Mlbc- Urgent Maintenance Of Shutter Mechanisms In Various Branch Canals And Provision Of New Shutter Mechanisms For Vilayanchathanur Branch Canal Shutters Under Section 1/Ii -General Mechanical Work
Tender Value
1.48 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
7 days left
EMD
3707
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palakkad → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Cpp-Np-(2026-27)--Mlbc- Urgent Maintenance Of Shutter Mechanisms In Various Branch Canals And Provision Of New Shutter Mechanisms For Vilayanchathanur Branch Canal Shutters Under Section 1/Ii -General Mechanical Work
BOQ
| Sl. No. | Item Description |
| 1 | Maintenance, Painting of Shutters ,Hoisting mechanism and providing new Worm and Pinion mechanisms |
| 2 | OD2744/2026-2027:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges. |
| 3 | OD2743/2026-2027:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges. |
| 4 | OD2742/2026-2027:Supply of MS round bar including cost of conveyance charges. |
| 5 | OD2745/2026-2027:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied. |
| 6 | OD2758/2026-2027:FABRICATION and ERECTION of EMBEDDED PARTS for canal shutters ( Up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl Officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied. |
| 7 | OD2739/2026-2027:PROVIDING of WORM and PINION having a lifting speed of around 5.00 cm/min for hand operation. having gearbox wall thickness of 12mm for side, 16mm for top and 24mm base. Top plate fixed with minimum 8 nos of M12 bolt , including cost of Mechanical stoper, Locking arrangement, Operating handle and all other materials, labour, hire charges and conveyance. |
| 8 | OD2741/2026-2027:Supply of MS BOLT and NUT up to 300mm Length including cost of conveyance. |
| 9 | OD2756/2026-2027:Dismantaling of the shutters (where there is road acess to the point ) from the grooves and stacking including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site (Weight of the unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting units as 80%)., |
| 10 | OD2752/2026-2027:Re-Conditioning of existing EN-8 Screw rod including cost of all materials, labour charges, hire charges, energy charges, conveyance, all leads and lifts etc. complete., |
| 11 | OD2746/2026-2027:Providing EN-8 Screw Rod 7.50 Tonne Capacity 4.00 Mtr lift Screw Rod having one number of EN-8 Screw Shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all material, labour, hire charges and conveyance. (63mm Dia Screw rod ). |
| 12 | OD2748/2026-2027:SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE. |
| 13 | OD2749/2026-2027:SUPPLYING and STACKING of PAD LOCK. |
| 14 | OD2757/2026-2027:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platform including hand rails , ladder etc. for the same including . alignment correcting and setting completeincluding cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied., |
| 15 | 85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 16 | 85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 17 | 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 18 | 5.22.5:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelHard drawn steel wire fabric |
| 19 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 20 | 13.2.1:15 mm cement plaster on the rough side of single or half brick wall of mix:1:4 (1 cement :4 fine sand) |
| 21 | OD2759/2026-2027:OVERHAULING OF EXISTING WORM AND PINION including cost of all materials,labour,hire charges, energy charges,conveyance and all leads and lifts for CANAL SHUTTER., Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender