Tender For Deposit-Sitc Of Inverter In Vaccination Room At Fhc Kanchiyar -Sitc Of Inverter In Vaccination Room At Fhc Kanchiyar-General Electrical Work
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Sep 2026
5 days left
EMD
2113
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Idukki → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Deposit-Sitc Of Inverter In Vaccination Room At Fhc Kanchiyar -Sitc Of Inverter In Vaccination Room At Fhc Kanchiyar-General Electrical Work
BOQ
| Sl. No. | Item Description |
| 1 | SITC of inverter system |
| 2 | OD200573/2025-2026:Supply, conveyance, installation, testing and commissioning of 2.5 24V DC 1PHASE IN AND 1PHASE OUT SINE WAVE OUT HOME UPS SYSTEM. ( EXIDE /MICROTECH/Luminous EQUALENT MAKE ) along with battery bank .. The UPS shall be housed in a free standing enclosure, and free from defects, sharp edges, nicks, scratches, burs etc. and provisions for suitable ventilation, easy maintenance, etc. The supplier should submitting Tested documents, Operation manual, service manual, etc. while the UPS is supplied and 2 Nos 150 AH tubular invertor battery tall type with 60 moth warrenty type of ISI marked suitably rated External AMARON /Exide/Luminous its equivalent make . |
| 3 | 1.10.1:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group A |
| 4 | 1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm |
| 5 | 1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm |
| 6 | 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 7 | 1.32:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 8 | 2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Single pole |
| 9 | 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 10 | 2.11:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 11 | 2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps |
| 12 | 2.3.3:Supplying and fixing following way, single pole and neutral, sheet steel, MCBdistribution board, 240 volts, on surface/ recess, complete with tinned copperbus bar, neutral bus bar, earth bar, din bar, interconnections, powder paintedincluding earthing etc. as required. (But without MCB/RCCB/Isolator)12 way, Double door |
| 13 | OD166318/2025-2026:Supply, conveyance installation testing and commissioning the light fittings of 1200 mm commercial LED integrated batten made of extruded Aluminum body and polycarbonate diffuser complete with all accessories etc. 1x 18 w LED fitting with electronic driver, Aluminum heat sink, 6500 K ,50000 Burning Hrs, flicker free , efficiency 2100 lumen efficiency suitable for continuous operation with THD less than 10%, power factor greater than 0.98, RoHS compliant, etc fittings directly fixed on wall or ceiling with factory made steel clamp to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required. .. Philips make model no. Smart Bright essential BN170 C LED20S-6500 L120 PSU or it's equivalent. |
| 14 | 90.10.3.23:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )16A 3 pin plug top Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender