Tender For Modernisation & Creation Of Art Look Of Janipur Showroom (Handicrafts & Handloom)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Sep 2026
12 days left
EMD
83300
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Modernisation & Creation Of Art Look Of Janipur Showroom (Handicrafts & Handloom)
BOQ
| Sl. No. | Item Description |
| 1 | Careful dismantling, removal, shifting and refixing of existing wooden cabinets/storage units from showroom to office of Directorate of Handicrafts and other departmental locations, including engagement of skilled carpenter and helper, dismantling of fittings/hardware, loading/unloading, handling, transportation within required lead, reassembly, alignment, fixing in position, making good minor damages, and complete in all respects as directed by the Engineer-in-Charge. |
| 2 | 1st class carpenter |
| 3 | Helper |
| 4 | Dismantling and removal of existing pre-laminated wooden wall panelling fixed on walls & removing of Stainless steel tubular pipes frame including glass shelves,disengagement of fixing members, removal of battens/framework if required, stacking and disposal of unserviceable material, and complete in all respects as directed by the Engineer-in-Charge. |
| 5 | 1st class carpenter |
| 6 | Helper |
| 7 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm |
| 8 | Dismantling aluminum / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge. |
| 9 | Dismantling with recovery of serviceable material of existing MS pipe/hollow section frame from entrance opening, including disengagement/cutting of welded joints, carrying out necessary cutting, addition, alteration, welding and fabrication of the salvaged MS sections, and re-erection/fixing of the modified MS framework in external entrance portion for roofing purpose, including engagement of fabricator (welder) and helper including the cost of welding by electric plant, handling, lifting, alignment, anchoring, surface preparation inclusive of all taxes & carriage complete but excluding cost of CNC-cut decorative jaali/MS sheet, MS Steel pipe (if required at site) application of approved metal primer and PU (Polyurethane) paint finish of approved shade as directed by the Engineer-in-Charge complete in all respects which shall be paid separately). |
| 10 | Fabricator (Welder) including machine, electrodes, cutting discs, minor consumables) |
| 11 | Helpers |
| 12 | Providing, fabricating and fixing 16 gauge MS sheet with CNC laser-cut decorative pattern of approved design, including necessary cutting, shaping, edge finishing, welding/fastening to the supporting MS framework, fixing with suitable clamps, screws, bolts or welding as required, complete in all respects as per approved design and application of approved metal primer and PU (Polyurethane) paint finish on both side of approved shade as directed by the Engineer-in-Charge inclusive of all taxes & carriage complete job.Only the openings of the ms frame shall be mrasered for payment. |
| 13 | Providing and fixing premium modular wooden wall display units of approved design and configuration, comprising open display shelves, vertical and horizontal partitions, decorative panels and base storage cabinets with shutters, fabricated out of 19 mm thick BWR/BWP grade plywood for all structural and exposed members and 12 mm thick plywood for back panels, finished with 1.0 mm thick approved decorative laminate (Sunmica) on all exposed surfaces, including edge banding/lipping, necessary grooves, rebates, mitre cuts and joinery work, complete with CNC-cut decorative jaali,Tree,Chinaar Leaf/any content provided by the department etc as directed by Engineer in charge in approved pattern, including polishing/PU/Duco finish to exposed CNC jaali surfaces as required, and all necessary hardware and fittings such as stainless steel hinges, telescopic drawer channels, handles, magnetic catches, screws, fasteners and fixing accessories, including cutting, fabrication, assembly, handling, transportation, erection, alignment and fixing in position, complete in all respects as per approved drawings, specifications and directions of the Engineer-in-Charge.(Note: design as per the drawings/3D view provided by the department) |
| 14 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigmentsetc. complete Size of tile 600x600 mm(Make: RAK/KAJARIA/SOMANY) |
| 15 | Hacking of wall including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. |
| 16 | 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) |
| 17 | Providing and fixing Vitrified wall tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades, with cement based high polymer modified quick-set tile adhesive (water based) conforming toIS:15477, in average 3mm thickness including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x1200 mm (Make: RAK/KAJARIA/SOMANY) |
| 18 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)directed, within a lead of 50 metres:All kinds of soil : |
| 19 | Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately):Sal woodincluding carriages complete job. |
| 20 | Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work,complete as per direction of Engineer-in-charge (Frame work shall be paid for separately).12mm thick commercial ply conforming to S : 1328 BWR type |
| 21 | Providing and fixing 18 mm thick HDMR (High Density Moisture Resistant) board CNC-cut decorative jaali panel of approved pattern and design, including necessary cutting, shaping, edge finishing, fixing to wooden/metal supporting framework with suitable screws, adhesives and fixing accessories, complete with surface preparation and application of approved primer and PU (Polyurethane) finish in approved shade, including handling, carriage, labour, loading/unloading and all incidental works, complete in all respects as per approved specifications and directions of Engineer-in-Charge. |
| 22 | Providing and fixing decorative high pressure laminate sheet of approved colour,shade & texture on wooden surface with approved addesive including necessary surface preparation,pressing,trimming,finishing & labour complete as directed by Engineer in charge .1.0 mm thick |
| 23 | Providing and fixing factory-made flush door shutter of size 3'-0\\" × 7'-0\\", made of approved quality solid core/particle board construction with both faces finished with 1.0 mm thick decorative laminate (mica) of approved colour and shade, including necessary edge lipping, adhesive, cutting and finishing, complete with SS hinges and fixing in position, including all incidental works, complete in all respects as per approved specifications and directions of Engineer-in-Charge (excluding cost of tower bolt, handles, door stopper, lockset and door closer, which shall be paid separately). |
| 24 | Providing and fixing approved quality stainless steel mortise lock set (privacy type) complete with lock body, latch bolt, strike plate, lever handles, thumb turn/indicator with emergency release facility, and all necessary screws, fasteners and fixing accessories, including cutting/chiselling of door shutter, fitting, fixing, alignment and testing, complete in all respects as per approved specifications and directions of Engineer-in-Charge. |
| 25 | Providing and fixing aluminum die cast body tubular type universal hydraulicdoor closer (having brand logo with IS: 3564, embossed on the body, doorweight upto 35 kg and door width upto 700 mm), with necessary accessoriesand screws etc. complete : |
| 26 | Providing and fixing Wooden flooring 8mm thick including laying of foam based cushion underneath it. Class AC-4 (Make Leben,Action Tesa,Shepherd Floor) |
| 27 | Providing, fixing and applying Plaster of Paris (POP) false ceiling consisting of frame work made with 50mm sq M.S. tubes of 18 G thickness as main runner at 600 mm c/c both ways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab, finished smooth to line and level including necessary supports, scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenders complete.Including providing and fixing expanded metal of size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm |
| 28 | Providing and fixing decorative wooden batten ceiling comprising 75 mm × 25 mm battens made out of approved quality plywood, finished with 1.0 mm thick decorative laminate (mica) of approved walnut/teak shade on exposed surfaces, fixed over suitable GI/wooden supporting framework at spacing of 25 mm to 40mm, including necessary cutting, edge finishing, alignment, fixing with suitable screws, adhesives and painting with black paint on area of the slab where the ceiling is to be done including all required accessories, including labour, carriage, loading/unloading and all incidental works, complete in all respects as per approved design and directions of Engineer-in-Charge. |
| 29 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick |
| 30 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter |
| 31 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats |
| 32 | Providing and fixing approved quality frame fixing anchor fastener, size 10 mm dia × 120 mm long (6\\" length), comprising nylon sleeve with mild steel screw/nail, complete with drilling, insertion and fixing in RCC/masonry surfaces, including all labour, tools and incidental works, complete in all respects as per approved specifications and directions of Engineer-in-Charge. |
| 33 | Providing and fixing 900x1800 mm beveled edge mirror of superior glass(of approved quality) having metallic cover of shade like black,rose gold or any other colour as approved by Engineer in charge complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers including fixing of strip lights of 3 different shades complete job. |
| 34 | Providing and fixing decorative ceiling panel comprising 18 mm thick HDMR (High Density Moisture Resistant) board CNC-cut panel of approved pattern and design, including necessary cutting, shaping, edge finishing and fixing to existing suitable GI/wooden supporting framework, complete with surrounding wooden border/frame finished with approved decorative laminate/paint, including surface preparation, primer and PU (Polyurethane) finish to exposed surfaces, fixing accessories, labour, carriage, loading/unloading and all incidental works, complete in all respects as per approved design and directions of Engineer-in-Charge. |
| 35 | Providing and fixing of custom-designed reception counter 6'-0\\" x2'-6\\"x3'-6\\" of overall finished size and shape as per approved drawing, made out of 19 mm thick BWP commercial plywood framework for base structure, including vertical supports, partitions, and internal carcass, properly fixed with necessary wooden screws, fevicol synthetic adhesive, clamps and all required fittings.The counter shall include: Vertical and horizontal framing in 19 mm BWP plywood for complete structural stability Internal partitions, shelves and support members in 12 mm BWP plywood Outer visible surfaces finished with approved design of 1 mm thick decorative laminate (Sunmica) of premium shade and texture as approved by Engineer-in-Charge internal surfaces finished with 0.8 mm laminate for smooth and durable finish Top counter surface finished with 1 mm laminate over 19 mm plywood base (no solid surface), properly edge-banded and sealed for water resistance and durability Decorative CNC-cut 18 mm HDMR panel (designer front fascia/branding panel) fixed as per design including grooves and finishing Provision of charcoal/wooden decorative louvers fixed as per design including proper alignment and finishing Backlit LED strip lighting including concealed wiring, driver, switches, and testing complete All necessary hardware such as hinges, screws, connectors, supports, and fittings of approved make Complete carpentry labour including cutting, fitting, polishing/finishing, alignment, and site installation All adhesives, consumables, edge bands, sealants (as required), wastage, handling, and transportation to site included Cleaning and finishing of complete unit ready for use The work shall be executed in all respects as per architectural design, drawings, and instructions of Engineer-in-Charge. |
| 36 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 37 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL antitermite treatment Treatment of existing masonry using chemical emulsion (Chlorophriphos /Lindane E.C. 20% with 1% concentration)@ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement :2 coarse sand) to the full depth of ho |
| 38 | Providing and fixing 4.0 mm PVDF ACP sheet (standard exterior signage grade) fluted/grooved in front & side face & plain in back of approved shade like charcoal grey,black etc and finish over existing MS (mild steel) fabricated frame for signage board, including necessary preparation of surface, cleaning, straightening of frame wherever required, fixing ACP sheets with approved system (aluminium profiles / Z-clips / SS screws / rivets as per site requirement), backing support, neoprene / EPDM gasket, silicone sealant for joints, cutting of panels to required size and shape, making necessary cut-outs for letters or logos if required, complete in all respects including scaffolding, tools & tackles, labour, wastage, and all incidental charges as per direction of engineer-in-charge. |
| 39 | Providing and fixing of 3D individual cut acrylic signage letters and logo with LED backlit effect, made out of high quality cast acrylic sheet (minimum 5 mm to 10 mm thickness as per design requirement) of approved colour and finish, CNC laser cut to precise shape and size as per approved artwork.The letters shall be provided with SS 304 grade or aluminium studs/spacers for wall mounting, with concealed fixing arrangement. Each letter shall be fitted with high quality waterproof LED modules (SMD 2835/5050 or equivalent) of approved brand, complete with constant voltage LED driver/SMPS, internal wiring, connectors, and heat resistant arrangement inside the letter housing.The backlighting shall be evenly diffused to provide uniform glow effect. All letters and logo shall be fixed over existing ACP/MS/wall surface including drilling, alignment, spacing, epoxy/adhesive fixing, testing and commissioning of complete illuminated signage system. Work shall include all labour, scaffolding, tools & tackles, wiring up to nearest electrical point, wastage, transportation, and all incidental charges complete in all respects as per direction of Engineer-in-Charge |
| 40 | Providing and fixing central floor display island comprising multi-level stepped display platforms of approved design and dimensions, constructed with 19 mm thick BWR/BWP plywood/HDMR board over suitable internal wooden framework, finished with approved decorative laminate on top and exposed horizontal surfaces, and charcoal-finished decorative louvers/panels of approved colour and shade on vertical sides of the display counter, including edge finishing, necessary supports, cutting, grooves, recessed warm white LED strip lighting in base profile complete with driver, wiring and accessories, all fixing materials, carpenter labour, handling, fitting, carriage, loading/unloading and complete installation in position, complete in all respects as per approved design and directions of Engineer-in-Charge.(Note:The size of central floor display must be according to the drawings provided by the department) Tier 1 center size 1200mmx1200mm,Tier 2 Middle size 2400mmx2400mm,Tier 3 Base size 3000mmx3000mm |
| 41 | Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass any colour/shade as approved by Engineer in charge held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as perspecification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured |
| 42 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 43 | Providing and fixing 450 mm long stainless steel pull handle of approved make and manufacturer for 12 mm thick toughened glass door shutter, made of Grade 304 stainless steel with satin/matt finish, including all necessary fixing accessories, drilling/cut-outs in glass wherever required, and complete installation in all respects as per approved specifications and directions of Engineer-in-Charge. The rate shall include all taxes, labour charges, carriage, loading/unloading, and all incidental charges for complete execution of the work. |
| 44 | Providing and fixing stainless steel patch lock of approved make and manufacturer for 12 mm thick frameless toughened glass door shutter, suitable for double-leaf glass door, including all necessary fittings, accessories, keys, required cut-outs in glass, and complete installation in all respects as per approved specifications and directions of Engineer-in-Charge. The rate shall include all taxes, labour charges, carriage, loading/unloading, and all incidental charges for complete execution of the work. |
| 45 | Engaging labour for shifting and removal of existing furniture, fabric items, display materials and other miscellaneous articles from the showroom premises, including careful handling, segregation, stacking at designated locations, disposal of unserviceable material as directed, cleaning of the area and making the hall clear, open and ready for further renovation/construction works, complete with all labour, tools & tackles, loading/unloading and incidental operations, complete in all respects as per the directions of Engineer-in-Charge. |
| 46 | Labour |
| 47 | Supplying and placing reception chair of approved make and model, comprising ergonomic mid-back design with breathable mesh backrest, adjustable lumbar support, cushioned upholstered seat, padded armrests, sturdy sled/base frame, and all standard fittings and accessories, size approximately 600 mm × 570 mm × 950 mm, complete in all respects as per approved specifications and directions of Engineer-in-Charge. |
| 48 | Carriage of Material by Mechancial Transport including loading, unloading & stacking |
| 49 | Sand for an average lead of 15 kms |
| 50 | Stone aggregate for an average lead of 15 kms |
| 51 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable size G.I box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Wire Make: Anchor/Havells/Vguard/Polycab MMS Conduit Make: AKG/Anchor/Finolex/Polypack |
| 52 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed Medium Class PVC conduit as required. Wire Make: Anchor/Havells/Vguard/Polycab (MMS Conduit Make: AKG/Anchor/ Polypack/Finolex |
| 53 | ( 2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 54 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 55 | Dismantling and removal of existing pre-laminated wooden wall panelling fixed on walls & removing of Stainless steel tubular pipes frame including glass shelves,disengagement of fixing members, removal of battens/framework if required, stacking and disposal of unserviceable material, and complete in all respects as directed by the Engineer-in-Charge. |
| 56 | SINGLE POLE |
| 57 | 32 A (Modular type) |
| 58 | Supplying and fixing following piano type switch/socket on the existing switch box/ cover including connections etc. as required. (Make:Havells/ABB/Legrand/Anchor /vguard /L&T/Schneider) |
| 59 | 5/6 amps switch |
| 60 | 3 pin 5/6 A socket outlet |
| 61 | 15/16 A switch |
| 62 | 6 pin 15/16 A socket outlet |
| 63 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.(Make: Havells/ABB/Legrand/Anchor /Schneider/Vguard) |
| 64 | Supplying and fixing following rating, double pole, 240 V,isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Make:VGuard/Havells/ABB/Panasonic/Schneider/Siemens/ Anchor) |
| 65 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Make: Havells/ABB/Siemens/ Panasonic/Vguard/ Anchor) |
| 66 | 8 way (4 + 24), Double door |
| 67 | Supplying and fixing of following sizes exhaust fan with PVC blade & Louvers complete set on existing holes on wall with necessary connection from ceiling rose to fan using 2 core flexible copper wire. Make: Bajaj/ Crompton /Havells/Anchor 25mm/9\\" Sweep Exhaust fan |
| 68 | Supplying, installation, testing & commissioning of 32 NVR Make: D-INK /TP LINK/ Hikvision/honewell/CP Plus |
| 69 | Supplying, installation, testing & commissioning of CP-UNC-TA41PL3C-Y 4MP Make: Honeywell/Panasonic/Hikvision/CP PLUS |
| 70 | Supplying, installation, testing & commissioning of CAT-6 UTP CABLE FOR CCTV Make: Anchor/Havells/ Vguard / Polycab |
| 71 | Supplying, installation, testing & commissioning of WD 4 TB 43 PURZ PURPLE Make:WD/ Hitachi/ Consistant/ Toshiba/As per EIC |
| 72 | Supplying, installation, testing & commissioning of ZEB-PDB01 POE RACK/BOX Make: D-INK/TP LINK/CP PLUS |
| 73 | Supplying, installation, testing & commissioning of 4 U RACK SERVER Make:DI-INK/TP LINK/CP PLUS |
| 74 | Supplying, installation, testing & commissioning of POE 8+2 Switch Network Make:DI-INK/TP LINK/CP PLUS |
| 75 | Supplying, installation, testing & commissioning of PVC BOX 4\\" Camera Make: ISI |
| 76 | Supplying, installation, testing and commissioning of Cubical type Indoor/Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 wire 50 Hz AC supply system with provision for housing incomers, Out Going, COS, Bus Bars etc. as required but excluding the cost of MCCB's, Bus Bars and Change over as per the following Description (IP:42) General Floor Distribution Panel. The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A drawing wiring diagrams, single line diagram before start of fabrication of LT panel Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating. |
| 77 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Thermal Magnetic type, Adjustable type) |
| 78 | 63 Amp, 25 KA, FP MCCB ICU = 100% ICS |
| 79 | 160 Amp, 36 KA, FP MCCB ICU = 100% ICS |
| 80 | Electrical Rubber Mat having thickness 6mm and width 1 Mtr |
| 81 | Aluminium Bus Bar 200 Amp set of 4 strips 18\\" |
| 82 | Digital Metering devices, comprising of Voltmeter, Ammeter, Selector Switch, Indicating Lamp, CT Set etc. |
| 83 | Supplying and drawing following sizes of FRLS/HFFRPVC insulated copper conductor, single core cable inthe existing surface/ recessed steel/ PVC conduit asrequired. Wire Make: Anchor/Havells/ Vguard / Polycab1x1.5 Sqmm |
| 84 | Supplying, installation, testing and commissioning of Invertor Sinewave 1050 VA Make: Luminous/Exide/ Microtek/Livguard. |
| 85 | Supplying & fixing of Battery 12 Volt. Tubular 150 AH with 36 months Guarantee Note.:- (Rs.2500 /Battery has to be deduct for the scrap of old batteries (150 AH) from allotted rate in case of replacement of battery is out of warranty period. Make: Luminous/Exide/ Microtek/ Livguard. |
| 86 | Supplying & fixing of PVC Trolley for housing single battery inverter. ISI |
| 87 | Dismantling of existing Split AC of All Capacities |
| 88 | Provision of Gas charging of 1.5 Ton split/window type AC including valve etc if required |
| 89 | Provision of Gas charging of 2 Ton split/window type AC including valve etc if required |
| 90 | Extra length of copper pipe for outdoor unit and suitable size copper cable of required size for 1.5 Ton AC |
| 91 | Extra length of copper pipe for outdoor unit and suitable size copper cable of required size for 2 Ton AC |
| 92 | Suppylying and fixing of drain pipe for indoor |
| 93 | Providing and fixing of blades of following fans:Wall Fan (Make: Havells/Anchor Pansonic /Crompton/Usha/Bajaj) |
| 94 | Supply Installation, Testing & Commissioning of 15 KVA oil cooled servo stabilizer, unbalanced load,input voltage range 90-470V, Output voltage 220-420V along with Over voltage protections /Short circuit protections/Over load protections/Earth Fault protections/ Under Load protections. 3 phase Make:GTB/Jai-maa Electrical/Muskan Electrical. |
| 95 | Supplying, installation, testing and commissioning of LED COB spot light fixture made die cast aluminium housing fitting with high quality reflector MF DL LED 119, 40w Size: 160x140x110mm With Phllips/Fulham/HR Driver Make: Mayfair/ Havells/ Jaquar. |
| 96 | Supplying, installation, testing and commissioning of 1 mrt Track Patti. Make: Mayfair/ Havells/ Jaquar. |
| 97 | Supplying, installation, testing and commissioning of LED COB track light fixture made die cast aluminium housing fitting with high quality lens MF CL LED 217 A, 30w (in Black Body) With Phllips/Fulham/HR Driver Make: Mayfair/ Havells/ Jaquar. |
| 98 | Supplying, installation, testing and commissioning of LED recess mounting spot light fixture MF DL LED 114C, 6w Size: 64x45x25mm With Phllips/Fulham/HR Driver Make: Mayfair/ Havells/ Jaquar. |
| 99 | Supplying Installation Testing and commissioning of Pre-wired LED COBE Light / Strip Light Fitting Including connection with 1.5 sqmm FRLS PVC insulated copper conductor simple core cable and earthing etc. as required or as Approved by Site Engineer Make : panasonic /wipro/Philips) |
| 100 | Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type twin rotary/Scroll Compressor(s), microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall capable of working even at 52°C ambient temperature (for cooling) and -20°C ambient temperature (for heating) without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP shall not be less than 3.1 (at full load) and IEER not less than 6.5. Please Note: Each floor shall have separate circuit(s). Makes:- O General/Carrier/ Toshiba |
| 101 | Supply, installation testing and commissioning of following minimum capacity VRV/VRF 4-way flow Cassette type Indoor unit equipped with synthetic washable media pre-filter,fan section with low noise fan/dynamically balanced blower,multi speed motor,coil section with DX Coppercoil, necessary supports, vibration isolation,cordless remote control etc., suitable for operation on single phase 230V±10%,50Hz AC supply,complete,as required. Make shall be one of O General/Carrier/ Toshiba 4TR |
| 102 | Supply, installation testing and commissioning of Imported fittings (Y-joints) comprising of 1 set of gas and liquid joint . Make shall be one of O General/ Carrier/ Toshiba |
| 103 | REFRIGERANT PIPING Supply,Installation,testing and commissioning including vaccumiazation, Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,complete with fittings, with suitable adjustable ring type hanger supports,jointing/brazing including accessories,insulated with closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines,all accessories as per specifications etc. as required. The rates shall include cost of all allied civil works such as making holes in the walls, chizelling and repairing with cement. Make: MPCL/Mandev/Indigo /RR/Mexflow |
| 104 | 9.53 mm outer dia, min. 0.8 mm thickness with 13mm thick nitrile rubber insulation |
| 105 | 15.8 mm outer dia, min. 1 mm thickness with 13mm thick nitrile rubber insulation |
| 106 | 22.2 mm outer dia, min. 1 mm thickness (Hard drawn) with 19mm thick nitrile rubber insulation |
| 107 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit asrequired. Make: AKG/Anchor/ Polypack/Finolex25mm |
| 108 | Providing and laying of control cum transmission wiring of 1.5 sq.mm x 3 core copper cable with aluminium shielding in PVC conduits between indoor and outdoor units. Make: Anchor/Havells/Vguard/Polycab |
| 109 | Additional Refrigerant charging R-410A as required for complete commission of VRF/VRV. (Complete) |
| 110 | Supplying and installing following size of perforated MS trays with perforation not more than 25%, in convenient sections, joined with connectors, suspended from the ceiling/ walls with suspenders including bolts & nuts, painting suspenders etc as required. Make: ISI 50mm collar x 10mm width x 1.5 mm thickness |
| 111 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required. Make:ISI |
| 112 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required Make:ISI |
| 113 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. Make: Anchor/Havells/Vguard/Polycab |
| 114 | 3 x 2.5 sq. mm |
| 115 | 4 x 6 sq. mm |
| 116 | 1 x 6 sq.mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender