Tender For Construction Of Pink Toilet Near Sdm Office, Mohanpur Of Ward No.1 Under Mohanpur Municipal Council During The Year Of 2025-26.
Tender Value
7.79 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
7 days left
EMD
15581
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Pink Toilet Near Sdm Office, Mohanpur Of Ward No.1 Under Mohanpur Municipal Council During The Year Of 2025-26.
BOQ
| Sl. No. | Item Description |
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: Chief Executive Officer, Mohanpur Municipal Council. Name of Work: Const.of Pink Toilet near SDM Office, Mohanpur of ward no.1 under Mohanpur Municipal Council during the year of 2025-26. DNIeT No: 38/MMC/MNP/DNIeT/2025-26, Dt. / /2025 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Name of work Item Code / Make Quantity Units Estimated Rate in Rs. Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Estimated cost in Rs. TOTAL AMOUNT In Rs. TOTAL AMOUNT In Words |
| 2 | Earth work in excavation by mechanical means (Hydraulicexcavator) / manual means over areas (exceeding 30cm indepth, 1.5m in width as well as 10 sqm on plan) includingdisposal of excavated earth, lead upto 50m and lift upto1.5m, disposed earth to be levelled and neatly dressed.-All kinds of soil cum |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.-All kinds of soil cum |
| 4 | Filling available excavated earth (excluding rock) intrenches, plinth, sides of foundations etc. in layers notexceeding 20cm in depth, consolidating each depositedlayer by ramming and watering, lead up to 50 m and liftupto 1.5 m.-All kinds of soil |
| 5 | Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compactingeach layer by using plate compactor or by any suitablemethod complete. |
| 6 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level: 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 7 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level: 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size) |
| 8 | Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five levelexcluding the cost of centring, shuttering, finishing andreinforcement- 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brickaggregate 20 mm nominal size) |
| 9 | Providing and laying in position specified grade ofreinforced cement concrete excluding the cost ofcentring, shuttering, finishing and reinforcement--All work upto plinth level: 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brickaggregate 20 mm nominal size) cum |
| 10 | Centering shuttering including struttings, propping etc.and removal of form work for: Suspended floors, roofs, landings, balconies and access platform with timber planks |
| 11 | Centering shuttering including struttings, propping etc.and removal of form work for: Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank |
| 12 | Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 13 | Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 14 | First class brick work in foundation and plinthincluding cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ).. |
| 15 | First class brick work in superstructure above plinthlevel & upto floor-five level including cost of allmaterials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). Cum. |
| 16 | Half brick masonry work with first class bricks infoundation and plinth including cost of all materials asrequired complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 17 | Providing and fixing factory made UPVC door framemade of UPVC extruded, section having an overalldimension, as below (tolerance +/- 1mm) with wallthickness 2.0mm+/- 02mm. corners of the door frameto be jointed with galvanized brackets and stainlessscrews, joint mitred and plastic wilded. The hinge sidevertical of the frames reinforced by galvanized MStube of size 19 × 19 mm and 1 mm +/- 0.1 mm wallthickness and 3 nos stainless steel hinges fixed to theframe complete as per manufacturers specificationand direction of Engineer-in-Charge. Extruded section Profile size 42x50 mm. |
| 18 | 24 mm thick factory made PVC door shutters made ofstyles and rails of a UPVC hollow section of size 59x24mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred andjoined at the corners by means of M.S. galvanised/plastic brackets of size 75×220 mm having wallthickness 1.0 mm and stainless steel screws. The stylesof the shutter reinforced by inserying galvanised MStube of size 20×20 mm and 1 mm ± 0.1 mm wallthickness. The lock rail made up of \\"H\\" Section, a UPVChollow section of size 100×24 mm and 2 mm ± 0.2 mmwall thickness fixed to the shutter styles by means ofplastic /galvanised MS \\"U\\" cleats. The shutter framefilled with a UPVC multi-chambered single panel of sizenot less than 620 mm, having overall thickness of 20mm and 1 mm ± 0.1 mm wall thickness. The panelsfilled vertically and tie bar at two places by insertinghorizontaly 6 mm galvanised MS rod and fastened withnuts and washers, complete as per manufacturer'sspecification and direction of Engineer-In-Charge. (forW.C. and Bathroom door shutter). |
| 19 | Providing and fixing 1mm thick M.S. sheet door withframe of 40x40x6mm angle iron and 3mm M.S. gussetplates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks& eyes, pinlets including embedding in cement concreteof required grade for fixing in position, all necessaryfittings, including applying a priming coat of approvedsteel primer etc. complete as required:- Using flats 30x6mm for diagonal braces and central cross piece. Providing and fixing 1mm thick M.S. sheet door with |
| 20 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominalsize)frame of 40x40x6mm angle iron and 3mm M.S. gusset |
| 21 | Providing and fixing M.S. grills of required pattern inframes of windows etc. with M.S. flats, square orround bars etc. all complete. Fixed to steel windows by welding. |
| 22 | Providing and fixing hand rail using structural steel etc.of approved size by welding etc. to steel ladder railing,balcony railing and staircase railing etc. includingcutting, hoisting, fixing in position and applying apriming coat of approved steel primer complete asrequired:- M.S. tube |
| 23 | Providing and fixing chequered terrazo tiles 22 mm thick with graded marble chips of size upto 6 mm, laid onfloors, footpath & courtyard on 20 mm thick bed ofcement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed withneat cement slurry mixed with pigment to match theshade of tiles including rubbing and polishing etc. allcomplete as per direction of Engineer-in-charge. Light shade pigment using white cement |
| 24 | Providing and fixing 1st class quality ceramic glazed wall tiles conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in allcolours, shades of any size as approved by Engineer -incharge in skirting, risers of steps and dados, laid over 12mm thick bed of cement mortar 1 : 3 (1 cement : 3 finesand) jointed with ordinary cement slurry includingpointing with white cement mixed with pigment ofmatching shade etc. all complete as per direction of theEngineer in-charge. 450 mm X 300 mm in all shades and design |
| 25 | Providing and laying 1st class quality ceramic floor tilesin different sizes (thickness to be specified by themanufacturer) of 1st quality conforming to IS : 15622 -2017 of approved make in colours such as White, Ivory,Grey, Fume Red Brown, laid over 20 mm thick cementmortar 1:4 (1 cement : 4 fine sand), Jointing with greycement slurry @ 3.3 kg/sqm including pointing the jointswith white cement and matching pigment etc. allcomplete as per direction of the Engineer in-charge. 300 mm x 300 mm in all shades and designs |
| 26 | 12 mm cement plaster of mix 12.1.2 Cement mortar 1:4 (1 cement : 4 fine sand) |
| 27 | 15 mm cement plaster on the rough side of single or half brick wall of mix: Cement mortar 1:4 (1 cement : 4 fine sand) |
| 28 | 6 mm cement plaster of mix : Cement mortar 1:3 (1 cement : 3 fine sand) |
| 29 | Neat cement punning. |
| 30 | Wall painting with acrylic plastic emulsion paint ofapproved brand and manufacture to give an even shade[Payment shall be made after submission of TestCertificate issued by the Manufacturer] : Two or more coats on new work |
| 31 | Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface complete. Water thinnable cement primer |
| 32 | Finishing walls with acrylic smooth exterior paint ofrequired shade of approved brand and manufacture[Payment shall be made after submission of TestCertificate issued by the Manufacturer] : New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 33 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an evenshade [Payment shall be made after subm Two or more coats on new work over an under coat of suitable shade with ordinary paint (primer) of approvedbrand and manufacture |
| 34 | Providing and fixing white vitreous china pedestaltype water closet (European type W.C. pan) with seatand lid, 10 litre low level white P.V.C. flushingcistern with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixturescomplete including cutting and making good the wallsand floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 35 | Providing and fixing white vitreous china water closetsquatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm |
| 36 | Providing and fixing P.V.C. low level flushing cisternwith manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixturescomplete. 10 litre capacity-White |
| 37 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the wallswherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 38 | Providing and fixing white vitreous china pedestal forwash basin completely recessed at the back for thereception of pipes and fittings. |
| 39 | Providing and fixing P.V.C. waste pipe for sink or washbasin including P.V.C. waste fittings complete. 32 mm dia |
| 40 | Providing and fixing 600x450 mm bevelled edge mirrorof superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats withC.P. brass screws and washers complete. |
| 41 | Providing and fixing 600x120x5mm glass shelf withedges round of supported on anodised aluminium angleframe with C.P. brass brackets and guard rail completefixed with 40 mm long screws, rawl plugs etc., complete. |
| 42 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall ofstandard shape with bracket of the same materials withsnap fittings of approved quality and colours weighingnot less than 105 gms. |
| 43 | Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved qualityand colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. |
| 44 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal outer dia .Pipes. |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal outer dia .Pipes. metre ₹ 442.20 |
| 46 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings This includes jointing of pipes& fittings with one step CPVC solvent cement,trenching ,refilling & testing of joints complete asper direction of Engineer in Charge.External work 25 mm nominal outer dia .Pipes. |
| 47 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 48 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore |
| 49 | Providing and fixing unplastisised P.V.C. connectionpipe with PTMT Nuts of approved quality and colour. 15 mm nominal bore with 45 cm length. |
| 50 | Providing and fixing ball valve (brass) of approved quality High or low pressure, with plastic floats complete : 25 mm nominal bore |
| 51 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 52 | Constructing soak pit 1.20 x 1.20 x 1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as perstandard design. |
| 53 | Boring with 100 mm diameter casing pipe for hand pump/ tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the hand pipe/tube well is lowered and tested : Beyond 12 m and upto 18 m depth. |
| 54 | Providing and placing in position filters of 40 mm diameter G.I. pipe of medim class as per IS : 1239 with latest amendment with brass strainer of approved quality. |
| 55 | Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well. |
| 56 | Providing and fixing of 1HP Horizontal pump set ( Kirloskar make) as per specification and direction of the Engineer-in charge |
| 57 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste & vent pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: Single socketed pipe - 110 mm OD metre ₹ 314.60 |
| 58 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC soil, waste & vent pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: Coupler 18.84.1.2 110 mm |
| 59 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC soil, waste & vent pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: Single equal tee with door 18.84.4.2 110x110x110mm |
| 60 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC soil, waste & vent pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: Bend 87.5° 18.84.5.2 110mm |
| 61 | Providing and fixing of Sanitary napkin vending machines for women . |
| 62 | Providing and fixing of Sanitary napkin incinerator machines . Total in Figures 779044.0 779044.0 INR Seven Lakh Seventy Nine Thousand &Forty Four Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender