Tender For Restoration / Revival Of Old Heritage Sites Of Purmandal, District Samba.
Tender Value
5.50 Crore
Estimated cost
Bid Submission
28 Sep 2026
17 days left
EMD
11.01 Lakhs
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration / Revival Of Old Heritage Sites Of Purmandal, District Samba.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge ( All kinds of soil ) |
| 2 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorophriphos/Lindane emulsifiable concentrate of 20% |
| 3 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL antitermite treatment. (excluding the cost of chemical emulsion) Treatment of points of contact of wood work with chemical emulsion Chlorophriphos /Lindane E.C. 20% with 1% concentration (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same |
| 4 | Lime Mortar 1 : 1 : 1 (1 lime putty: 1 surkhi: 1 fine sand) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with :- |
| 6 | 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) with all leads and lifts carriage complete. |
| 7 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) with all leads and lifts carriage complete. |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with, 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) with all leads and lifts carriage complete. |
| 9 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 10 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately) First class teak wood |
| 11 | Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) Second class teak wood |
| 12 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required, In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 13 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 14 | Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete. |
| 15 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shadeincluding rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 16 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand), with all leads and lifts carriage complete. |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, Two or more coats on new work |
| 18 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 20 | Renewing wooden beams in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to dumping ground within 50 meters lead, Not exceeding 4.00 meters in length, ( Hollock wood beams ) |
| 21 | Providing and laying in situ seven course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/ sqm, which shall consist ofblown type bitumen of grade 85/25 conforming to IS: 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane of specified thickness, weight and centre core, HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall befinished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement:3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement: 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately.) Modified Polymeric membrane 2.0 mm thick of 3.0 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron |
| 22 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead, For thickness of tiles 10 mm to 25 mm |
| 23 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 24 | Raking out joints of stone masonry surface to the required width and depth, with due care and precaution by mechanical/manual means including preparing and cleaning the surface for re-pointing / refilling of joints, including disposal of rubbish to the dumping ground within 50 mtrs lead. |
| 25 | Providing and fixing double scaffolding system ( cup lock type ) on the exterior side of building/ structure, upto 25 mtrs height above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 mtr.c/c,horizontal and vertical tubes joint with cup and lock system with M.s tube, M.S tubes Challis M.S clamps and stairs case system in the scaffolding for working platform etc. and maintaining it in a serviceable condition of execution of work of cleaning and/ or pointing and/or applying chemical and removing it their after the scaffolding system shall be stiffened with bracings, runners connecting with the buildingetc. where ever required. if feasible, for inspection of work at required location with essential safety features for the work men etc, complete as per directions and approval of Engineer-in-charge. |
| 26 | Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungue, monkey beats, vegetable growth etc. including providing, applying and washing the surface with liquid ammonia chemical of 5% solution and other chemical cleaning agents as approved by Archaeological survey of India/Engineer-in-charge, of approved brand and manufacturer with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica and finally washing the surface with clean water with the help of pressure jet machine, windows door etc, by suitable covering so as to avoid any damage to the building/structure, all as per directions of Engineer-in-charge(the rate is inclusive of all materials and labours involved except scaffolding) |
| 27 | Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and manufacturer, on cleaned sand stone surface at desired locations as per directions of Engineer-in-charge ( the rate is inclusive of all materials and labours involved except scaffolding) |
| 28 | Ruled/ Flush pointing on Red sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio 1:1.5:1/2 one lime : 1.5 surkhi ( 50% red and 50% light yellow surkhi):1/2 marble dust ( the rate is inclusive of all materials and labours involved except scaffolding) |
| 29 | Applying two or more coats of Ethyl silicate chemicals as approved by Archaeological survey of India/ Engineer-in-charge, of approved brand and manufacturer, with brush or spray on the existing stone masonry surface till there is no further absorption of chemical by stone surface, including protecting the applied surface from direct sun light by suitable means during application, all complete as per direction of the Engineer-in-charge ( the rate is inclusive of all materials and labours involved except scaffolding) |
| 30 | Applying breathable, non-reactive antifungal and water repellant silane/ Siloxane chemical as approved by Archaeological survey of India/ Engineer-in-charge, of approved brand and manufacturer, diluted with solvent mineral turpentine oil in the ratio of 1:12 ( 1 part of approved Chemical :12 part of turpentine oil), on the existing sand stone masonry surface with two or more codes to given uniforms application of chemical on the surface all complete as per direction of Engineer-incharge ( the rate is inclusive of all materials and labours involved except scaffolding) |
| 31 | Vegetation removal : Removal of all weeds, shrubs, trees, creepers, moss, algae and any other self-sown vegetation from the roof / wall surface, terrace, parapet walls and junctions, uprooting of deep rooted plants / peepal from Shikharas including chemical trreatment of roots with bio-inhibitor ( e.g. Zinc Fluorosilicate ). This includes the complete removal of root systems to prevent regrowth with proper chemical treatment including material and labour complete. |
| 32 | Crack injection : Grouting of fine cracks using gravity-fed or low-pressure injection of NHL ( Natural Hydraulic Lime ) based grout mixed with stone dust. |
| 33 | Brass Shikhra Restoration : Cleaning of the brass Shikhra using traditional mild acidic agents ( Tamarind / lemon ) or specialized metal polishes, followed by a coat of Microcrystalline wax for oxidation protection. |
| 34 | Arch Consolidation : Propping of sagging arches ( if any ) and re-filling structure gaps with NHL 3.5 ( Natural Hydraulic Lime ) injection grout |
| 35 | Restoration and Reconstruction of Stone Corbelling : Comprehensive structural repair of distressed or broken corbelled masonry, including the manual removal of vegetation and decayed mortar, followed by deep pressure grouting of internal voids using a Natural Hydralulic Lime ( NHL 3.5 ) based grout. The item includes \\"Dutchman\\" repairs for chipped sections and full-block replacement of missing or shattered stones with new stone of matching mineralogy and hand-chiseled finish all fractured members are to be structurally stabillized using concealed 316-grade stainless steel or carbon fiber pins and finished with a breathable lime-sand mortar matched to the original color and texture, strictly excluding the use of Portland cement |
| 36 | 100 Kva cpcb4 Diesel Generator |
| 37 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 38 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. |
| 39 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete, with all leads and lifts carriage complete. |
| 40 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement, 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) with all leads and lifts carriage complete. |
| 41 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with, 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) with all leads and lifts carriage complete. |
| 42 | Centering and shuttering including strutting, propping etc. and removal of form work for :- |
| 43 | Foundations, footings, bases for columns |
| 44 | Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc. |
| 45 | Columns, pillars, piers, abutments, posts and struts. |
| 46 | Suspended floors, roofs, landings, balconies and access platforms. |
| 47 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 48 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 49 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above or upto plinth level, Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 50 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in, Cement mortar 1:6 ( 1 cement : 6 coarse sand) with all leads and lifts carriage complete. |
| 51 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 52 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in, Cement mortar 1:4 ( 1 cement : 4 coarse sand) with all leads and lifts carriage complete. |
| 53 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 54 | Providing and fixing 16mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) |
| 55 | Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete |
| 56 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete ( 250x16 mm ) |
| 57 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete |
| 58 | 200x10 |
| 59 | 100x10 |
| 60 | Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete, Stainless steel (grade 304) wire gauze of 0.5mm dia wire and 1.4 mm aperture on both sides |
| 61 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete, In colour such as White, Ivory, Grey, Fume Red Brown |
| 62 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 63 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase. |
| 64 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion (i) Single socketed pipes (75 mm diametre) |
| 65 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Bend 87.5° |
| 66 | 75 mm bend |
| 67 | 110 mm bend |
| 68 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion ( Single tee without door ) |
| 69 | 75x75x75 mm |
| 70 | 110x110x110 mm |
| 71 | 12mm Cement plaster of mix, 1 : 4 ( 1 cement : 4 fine sand), with all leads and lifts carriage complete. |
| 72 | 15mm Cement plaster on the rough side of single or half brick wall of mix, 1 : 6 ( 1 cement : 6 fine sand), with all leads and lifts carriage complete. |
| 73 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 74 | Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing off by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost ofimported earth, sludge or manure) |
| 75 | Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment), with all leads and lifts carriage complete. |
| 76 | Supplying and stacking at site dump manure from approved source including carriage complete (manure measured in stacks will be reduced by 8% for payment) Screened through sieve of I.S. designation 4.75 mm |
| 77 | Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately) |
| 78 | Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded) |
| 79 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 80 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make andmosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:18.3.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 81 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete, Semi rigid pipe ( 32 mm dia ) |
| 82 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 83 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. |
| 84 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge, Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing |
| 85 | 20mm nominal outer dia pipes. |
| 86 | 25mm nominal outer dia pipes. |
| 87 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge, Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. (20mm nominal outer dia pipes) |
| 88 | Providing and fixing uplasticized PVC connection pipe with brass unions, 30 cm length, 20 mm nominal bore |
| 89 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 90 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 91 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion, |
| 92 | Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 93 | For shutters of doors, windows & ventilators includingproviding and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 94 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 95 | Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations.a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. d) finishing the surface with 20mm thick joint less cement mortar of mix 1:4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry andmaking pattern of 300x300mm/sq 3mm deep.e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineerin-charge with average thickness of 120mm and minimum thickness at khurra as 65 mm |
| 96 | Providing, Supplying, fixing, testing and commissioning wall-mounted sanitary napkin vending machine, powder-coated MS/Stainless Steel body, minimum storage capacity 30-50 napkins, manual push-button or sensor-based dispensing mechanism, lockable front door, complete with all fixing accessories, anchor fasteners, testing and commissioning, as per directed by the Engineer-in-charge |
| 97 | Providing, Supplying, fixing, testing and commissioning wall-mounted sanitary napkin vending machine, powder-coated MS/Stainless Steel body, minimum storage capacity 30-50 napkins, manual push-button or sensor-based dispensing mechanism, lockable front door, complete with all fixing accessories, anchor fasteners, testing and commissioning, as per directed by the Engineer-in-charge |
| 98 | Providing and fixing of 100mm dia stainless steel grating |
| 99 | Providing and fixing first quality white vitreous china oval shaped ( under counter ) wash basin 550x400 mm for under counter mounting, specially fabricated CI/MS brackets, painted with two or three coats of enamel paint of approved shade over a coat of primer, CP waste and coupling chain and rubber plug, P.V.C flexible 3Zmm dia waste pipe including cutting and making good the walls wherever required complete job. |
| 100 | Providing and fixing CP fittings of approved brand Jaquar / Cera / Hindware or equivalent complete, all inclusive Basin Mixer |
| 101 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 102 | Providing and fixing PVC floor trap of finolex / supreme make |
| 103 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 104 | Providing / Supplying and fixing / installation of following sanitary fittings and hardware fittings and fixtures, Hindware, Parryware, Kerovit or equivalent as per direction as per direction of Engineer-in-charge |
| 105 | Towel rod 2 feet |
| 106 | soap dispenser |
| 107 | Providing and applying waterproofing treatment with one coat of primer and two coats of rubber-modified cold-applied bitumen emulsion coating using Dr. Fixit Bitufix / Fosroc Nitoproof / Sika Igolflex / Asian Paints Smart care Damp Proof or equivalent approved by the Engineer-in-charge, over properly prepared concrete or masonry surfaces |
| 108 | Carpenter |
| 109 | Helper with Carpenter |
| 110 | Electrician |
| 111 | Helper with Electricial |
| 112 | Plumber |
| 113 | Helper with Plumber |
| 114 | Painter |
| 115 | Helper with Painter |
| 116 | Mason |
| 117 | Helper with Mason |
| 118 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL antitermite treatment, Treatment of soil under existing floors using chemical emulsion(Chlorophriphos/ Lindane E.C. 20% with 1% concentration) @ one litre per hole, 300mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floor |
| 119 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 120 | Applying priming coat with ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
| 121 | Providing and executing traditional Basholi style mural paintings on the interior façade of temples as seen in the pictures |
| 122 | 10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat with common burnt clay (non modular) brick tiles of class designation 10.0 |
| 123 | Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge (In lime mortar) |
| 124 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with Cement mortar 1:6 (1 Cement : 6 coarse sand) Quarry |
| 125 | Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like, Lime mortar 1:1:1 (1 Lime putty: 1 Surkhi: 1 Fine sand) Quarry |
| 126 | Providing and laying 450 mm thick traditional brick-on-edge roof slab in lime-surkhi mortar including centering and shuttering, brick masonry, lime concrete filling, lime terracing finishing, curing, scaffolding and all incidental charges complete as per heritage construction practice |
| 127 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level, 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) with all leads and lifts carriage complete. |
| 128 | Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level including curing complete with Lime mortar 1:1:1 (1 Lime putty: 1 Surkhi: 1 Fine sand) ( 1st Sort ) |
| 129 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level, 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) with all leads and lifts carriage complete. |
| 130 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately) ( Second class teak wood ) |
| 131 | Providing and laying factory made Precast concrete solid blocks of 200mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 132 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with Cement mortar 1:6 (1 Cement : 6 coarse sand) Nallah |
| 133 | Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like Cement mortar 1:6 (1 Cement : 6 coarse sand) Nallah |
| 134 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete, Hot finished welded type tubes |
| 135 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 136 | Brick work in gauged arches in superstructure above plinth level and upto floor V level in cement mortar 1:3 (1 cement : 3 coarse sand ) including centering, shuttering and curing complete, for span upto 6 meters with common burnt clay (non-modular) bricks of class designation 7.5. |
| 137 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 138 | Wooden planking, tongued and grooved in flooring including fixing with iron screws complete ( 12 mm thick ) Second class teak wood |
| 139 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 140 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete ( 125 mm ) |
| 141 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete, Twin rubber stopper |
| 142 | Supplying and fixing hut type double pole hanging dustbins of size 380mm dia 1070mm and 0.60mm th, having capacity of 70 ltrs. Min of grade SS304 and making sticker of dry and wet waste vertical pipe 58mm dia, 1500mm high SS 304 min wt 40 kg. sand ht 1300 = 5mm SS-304 canopy of size 380 x 1070mm SS-304 base plate of size 150mm x 150mm x 3mm th. embeded in cement conc. 1:3:6 mix hut sheet 580 x 1150mm |
| 143 | Providing, supplying and fixing in position precast cement concrete / Glass Fibre reinforced concrete (GRC) cylindrical or bowl-shaped decorative pots / planters of 1000 mm outer diameter and a minimum height of 600 mm to 750 mm. The pots shall be cast using a minimum M-25 grade concrete mix or high-performance GRC matrix, reinforced with suitable secondary reinforcement ( or alkali-resistant glass fibers ) to prevent shrinkage cracks and handle structural soil loads. The wall thickness shall not be less than 25 mm to 40 mm depending on the profile. The item must include a minimum of three 25 mm diameter drainage holes at the bottom, an internal coat of bitumen-based or polymer-modified flexible waterproofing membrane, and an external finish with two or more coats of premimum weather-proof exterior acrylic emulsion paint or a natural concrete smooth / exposed texture finish over an approved primer coat. Rate shall include cost of all materials, molds, fabrication, curing, transportation, lifting, placing in designated positions as per architectural landscaping layouts, leveling and cleaning up complete as directed by the Engineer-in-charge |
| 144 | Providing, supplying and fixing in position heavy-duty monolithick natural Red Sandstone / Jodhpur Stone bench with backrest of overall size 1500mm x 600 x 850mm. The seat slab and backrest shall be crafted from premium grade, defect-free natural stone with a minimum thickness of 50mm having hand-chiseled / semi-polished finishes and smooth, rounded bullnosed edges. the bench structure shall be supported on two solid stone legs 100 mm minimum thickness intricately carved /shaped as per architectural drawings. The legs must be securely anchored and embedded at least 200mm below the finished ground level into a secure concrete foundation of M15 grade PCC (1:2:4) of size 50mm x 450mm x 300mm. The item includes the cost of all materials, stone carving, transportation, transit insurance, excavation, concrete foundation base, leveling and jointing using high-strength epoxy / tensile grouts complete as per the direction of the Engineer-in-charge |
| 145 | Plants and Shrubs |
| 146 | Holy Basil |
| 147 | Dwarf Nandiyavattam ( Crepe Jasmine ) |
| 148 | Mussaenda acuminta |
| 149 | Allamanda cathartica |
| 150 | Rudraksha tree ( Elaeocarpus ganitrus ) |
| 151 | Chorisia speciosa |
| 152 | Nyctanthes arbor-tristis ( Parijat Tree ) |
| 153 | Plumeria alba |
| 154 | Plumeria rubra |
| 155 | Hamelia patens |
| 156 | Ficus benjamina |
| 157 | Bamboo palm chamaedorea seifrizii |
| 158 | Areca Palm Chrysalidocarpus lutescens |
| 159 | Morning glory ipomoea purpurea |
| 160 | Shami Tree ( Prosopis cineraria ) |
| 161 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth asdirected ( All kinds of soil ) |
| 162 | Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame workincluding M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).16.67.1 Overhead informatory road signage. |
| 163 | Providing and fixing of nuts and bolts of required size cast for 01 No. three plate directional signage Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender