Tender For Installation, Testing And Commissioning Of Instruments Installation Works Relating To Rewinder Dust Extraction System And Related Areas Of Tissue Machine#5 At Tnpl Unit Ii.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Sep 2026
1 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruchirappalli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation, Testing And Commissioning Of Instruments Installation Works Relating To Rewinder Dust Extraction System And Related Areas Of Tissue Machine#5 At Tnpl Unit Ii.
BOQ
| Sl. No. | Item Description |
| 1 | Instruments Erection and CommissioningNote : Unit rate quoted shall be inclusive of Installtion and loop checking & Commissioning. |
| 2 | Vibration Transmitter |
| 3 | Flow Switch |
| 4 | LT-Diaphragm |
| 5 | LT-Radar |
| 6 | Pressure Gauge |
| 7 | Pressure Transmitter / DPT |
| 8 | Control Valve (Erection by mechanical scope & tubing by bidder scope) |
| 9 | On-Off Valve (Erection by mechanical scope & tubing by bidder scope) |
| 10 | Magnetic Flow Transmitter (Magnetic flow tube erection by mechanical scope ) |
| 11 | Flow Transmitter |
| 12 | Temperature Transmitter |
| 13 | Steam Valve |
| 14 | PERFORATED FRP CABLE TRAYS WITH SUITABLE TRAY JOINT ACCESSORIES |
| 15 | 600 mm (W) X 50 mm (H) X 3000 mm (L) X 3.0 mm THICK |
| 16 | 200 / 300 mm (W) X 50 mm (H) X 3000 mm (L) X 3.0 mm THICK |
| 17 | 50 mm (W) X 25 mm (H) X 3000 mm (L) X 2.5 mm THICK |
| 18 | AIR LINE ASSEMBLY & FITTINGS: (SS) Note : Pipe/tube installation unit rate quoted shall be inclusive of all necessary fittings like valve, elbow, tee, connectors, union, bend, bush, dummy etc. |
| 19 | 1\\" PIPE, SCH 40 (SS304) (ALONG WITH 1\\" ELBOW + 1\\" BALL VALVE + 1\\" SOCKET + 1\\" UNION + 1\\" ONE SIDE THREADED NIPPLE 100 MM + 1\\" TWO SIDE THREADED NIPPLE 100 MM) |
| 20 | 8MM OD TUBE SS 316 (ALONG WITH 3/8\\" NPT(M) X 12MM SS 316 TUBE CONNECTOR, 8MM X 8MM SS 316 TUBE UNION) |
| 21 | 12MM OD SS 316 TUBE (ALONG WITH 1/4\\" X 1/2\\" SS REDUCER BUSH, 1/4\\" X 3/8\\" SS 316 REDUCER BUSH & 3/8\\" X 1/2\\" SS 316 REDUCER BUSH |
| 22 | 1” SS 316 tube (SS316) (ALONG WITH 1\\" ELBOW + 1\\" BALL VALVE + TUBE CONNECTOR + 1/2\\" BALL VALVE+ 1\\" UNION + 1\\" ONE SIDE THREADED NIPPLE 100 MM + 1\\" TWO SIDE THREADED NIPPLE 100 MM + 8MMX8MM ELBOW+8MMX8MM TEE + 8MMX8MM DUMMY+ REDUCER BUSH) |
| 23 | INSTRUMENT AIR TUBE AND FITTINGS WITH NUTS AND FERRULESNote : Copper tube installation unit rate quoted shall be inclusive of all necessary fittings like valve, elbow, tee, connectors, union, bend, bush, dummy etc. |
| 24 | 10mm OD Copper tube (along with 3/8\\" NPT(M) X 10mm copper tube connector + 1/4\\" NPT(M) X 10mm copper tube connector + 10mm X 10mm copper tube union + elbow + tee + copper reducer brush) |
| 25 | 8mm OD Copper tube (along with 1/4\\" NPT(M) X 8mm SS316 tube connector + 8mm X 8mm copper tube union + elbow connectore + tee with nut and freuule +copper reducer brush |
| 26 | IMPULSE PIPE & TUBES |
| 27 | 12MM OD Seamless pline pipe – SS316 |
| 28 | 1/2\\" Socket – SS316 |
| 29 | 90 DEG Elbow connector for 12MM OD Tube – SS316 |
| 30 | 1/2\\" NPT(M)X12 MM Tube connector – SS316 |
| 31 | 12MM X 12MM tube union - SS 316 |
| 32 | 1/2” (SCRD) Globe valve |
| 33 | Equal Tee 12mmX12mmX12mm – SS 316 |
| 34 | 1/2\\"T/H Nipple 4\\" Long – SS316 |
| 35 | 1/2”NPT Plug – SS316 |
| 36 | 3” Condensate pot with 4 Nos. of 1/2” NPT(F) Socket - SS 316 |
| 37 | 1/2” Syphon- SS316 |
| 38 | ½ “ SS Needle valve |
| 39 | 12 mm Check valve |
| 40 | Miscellaneous |
| 41 | 100 mm X 50 mm X 5 mm C channel |
| 42 | 50 mm X 50 mm X 5 mm L Angle |
| 43 | 25 mm X 25 mm X 3 mm L Angle |
| 44 | 2” OD, MS pipe |
| 45 | 150 mm X150 mm X 6 mm MS Plate |
| 46 | 12 mm/16mm Anchor fastener |
| 47 | 2” SIZE AIR DISTRIBUTOR (MANIFOLD) OF SS 304 – ASSEMBLY |
| 48 | Number of ways : 6Nipple : 3/8”NPT(M) welded – 6 Nos.Ball valve : 3/8” - 6 Nos.Air manifold inlet : Size 1” with 1” valveAir manifold drain : Size 1/2” with 1/2” Valve |
| 49 | Number of ways : 10Nipple : 3/8” NPT(M) welded – 10 Nos.Ball valve : 3/8” - 10 Nos.Air manifold inlet : Size 1” with 1” valveAir manifold drain : Size 1/2” with 1/2” Valve |
| 50 | CABLE LAYING :– Note : Cable installation unit rate quoted shall be inclusive of cable laying, dressing, clamping, glanding, (Single & Double compression gland) ferruling and termination at both ends. This shall also be inclusive of supply of suitable lugs and preparation of ferrules. Ferrules shall be continuous printed type. Circular ring type individual ferruling is not acceptable. |
| 51 | 1Pair X1 Sq mm - Signal Cables |
| 52 | 6 Pair / 8Pair x1 Sq mm-Signal Cables |
| 53 | 16Pair / 24 Pair X 1 Sqmm-Signal Cables |
| 54 | 2Core /3 core X1.5 Sq mm-Control cables |
| 55 | 7Corex1.5 Sq mm -Control cables |
| 56 | 12Corex1.5 Sq mm-Control cables |
| 57 | 24Core X1.5 Sqmm-Control cables |
| 58 | 3Core X 1.5 Sq mm -Power Cable |
| 59 | 3Core X 2.5 Sqmm-Power Cable |
| 60 | 1Core x 6 mm²-Earth cable |
| 61 | 1Core x 16 mm²-Earth cable |
| 62 | 1Core x 50 mm²-Earth cable |
| 63 | JUNCTION BOXES OF SS 304 & IP65 ENCLOSURE installation with Support Spare gland holes shall be covered with dummys. |
| 64 | ANALOG JUNCTION BOX (Big)Size : 750mm(W) X 750 mm(H) X 300mm(D)Gland plate : Knockout - 16 Nos, of 1/2” NPT Gland and Knockout - 2 Nos, of 1” NPT Gland2.5 Sqmm Terminals : 100 Nos fixed in suitable DINRAIL PVC Duct with cap : Required. JB Material :SS 304, IP65 |
| 65 | ANALOG JUNCTION BOX (Small)Size : 350mm(W) X 350 mm(H) X 250mm(D)Gland plate : Knockout - 10 Nos, of 1/2” NPT Gland and Knockout - 2 Nos, of 1” NPT Gland2.5 Sqmm Terminals : 30 Nos fixed in suitable DINRAIL PVC Duct with cap : Required. JB Material :SS 304, IP65 |
| 66 | DIGITAL JUNCTION BOX (Big)Size : 450mm(W) X 450 mm(H) X 250mm(D)Gland plate : Knockout for 16 Nos, of 1/2” NPT Gland and Knockout for 2 Nos, of 1” NPT Gland2.5 Sqmm Terminals : 50 Nos fixed in suitable DINRAIL PVC Duct with cap : Required. JB Material :SS 304, IP65 |
| 67 | POWER DISTRIBUTION BOXESSize : 350mm(W) X 450 mm(H) X 250mm(D)Gland plate : Knockout for 10 Nos 1/2” NPT Gland Knockout for 2 Nos of 1” NPT Gland2A Double pole MCB (Siemens) : 10 NOS Fixed in suitable DINRAIL2.5 Sqmm Terminals : 30 Nos fixed in suitable DINRAIL 4.0 Sqmm Terminals : 3 Nos fixed in suitable DINRAILPVC Duct with cap : Required. Earthing Bus bar : required.JB Material :SS 304, IP65 |
| 68 | INSTALLATION OF CHEMICAL FILTER Note : Crane access is not possible for this location, only manual shifting |
| 69 | Panel Size - 800mm (W) x 800mm (D) x 2115mm (H) (approx) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender