Tender For Construction Of Multipurpose Building For Great Revolutionary Writer Yashpal Sahitya Pratishthan At Nadaun, District-Hamirpur (Hp). (Sub Head : construction of Civil Work, I.E (Building Portion), Including Ws And Si, Septic Tanks And Soak
Tender Value
2.56 Crore
Estimated cost
Bid Submission
14 Sep 2026
0 days left
EMD
5.12 Lakhs
Bank guarantee accepted
Document Fee
7000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Multipurpose Building For Great Revolutionary Writer Yashpal Sahitya Pratishthan At Nadaun, District-Hamirpur (Hp). (Sub Head : construction of Civil Work, I.E (Building Portion), Including Ws And Si, Septic Tanks And Soak Pit, Rain Water Harvesting Tank, Site Development, Boundary Wall Etcetera) Estimated Cost:-Rs. 25604820/- Earnest Money:- Rs. 512000/- Time Limit:- 06 Months
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (hydraulic excavator)/ manual in all height and depths and in all kind of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rocks, chiseling/ wedging out of rock (where blasting is prohibited) and their intermediate classification of soil , setting out true to the required line, grades, width, cutting and trimming of side slopes as shown in the drawing and if water is met with in the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailling out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-In-Charge and disposal all surplus excavated soil in acquired width or at an approved dumping site (to be arranged by the contractor) including its stacking leveling dressing including all lead and lifts by head load, mechnical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HP PWD specification. Any loss to the public or private property during the course of execution and disposal of unserviceble meterial shall be the absolute responsibility of the contractor which shall have to be compensated by him in all case. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 2 | Excavation work by mechanical means (hydraulic excavator)/ manual in foundation trenches or drains and overall areas in earth work of all kind of soil such as pick work, jumper work, blasting work, jumper blasting work soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting is prohibited, chiseling or any other mixed variety of soil, including shoring, strutting or bailing out water upto any depth or any height quantum of water including dewatering removal of slush and stacking the serviceable and unserviceable material clear from the edge of excavation and as per direction of Engineer-In-Charge and returning the stacked soil in 15 cm (Fifteen centimetre) layers, when required into plinths, side of foundation etcetera consolidating each deposited layer by ramming watering and then disposing of all excavated earth as directed by the Engineer-In-Charge, ( the unuseful material for disposing at dumping site ( to be arranged by the contractor) within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 3 | Supplying and filling in plinth with sand under floors,including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 4 | Preparation and consolidation of sub grade with Road Roller 8-10 (eight - ten) Tonne, including making good the undulation etcetera after excavating earth to an average of 22.5 cm (twenty two decimal five centimetre) depth, dressing to camber and consolidating with road roller including making good the undulations etcetera and re-rolling the sub grade completed as per HP.PWD specifications including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 5 | Providing and construction of granular sub-base 150mm (one hundred fifty milimeters) compacted thickness by providing well graded materials as per table 400.1 spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel roller 80-100 kN (Eighty-hundred Kilo Newton) static roller to achieve the desired density, complete as per MORD Technical Specification section 400 for grading-I material, including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 6 | Providing and filling with stone boulder behind retaining walls of selected hard stone complete including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 7 | Providing and Filling in plinth with hard stone under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 8 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (One cement : four sand : eight graded stone aggregate 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in Retaining wall/return wall/ breast wall and foundation and plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 9 | Providing and laying mechanically mixed and vibrated plain cement concrete 1:3:6 (One cement : three sand : six graded stone aggregate 40mm (Forty millimetre) nominal size) and curing complete excluding cost of form work in Retaining wall/return wall/ breast wall and foundation and plinth complete complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 10 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20N/mm square (Twenty newton per square millimetre) with cement contents not less than @ 320 Kilogram / Cubic metres (at the rate Three hundred twenty kilogram per Per Cubic metre) or as per approved design mix. All works upto and above plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 11 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty five newton per square millimetre) with cement contents not less than @ 360 Per Kilogram / cubic metre (at the rate Three Hundred sixty kilogram per cubic metre) or as per approved design mix. All works upto plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 12 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty five newton per square millimetre) with cement contents not less than @ 360 Per Kilogram / cubic metre (at the rate Three Hundred sixty kilogram per cubic metre) or as per approved design mix. All works above plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 13 | Providing plinth protection with 50mm (Fifty millimetres) thick interlocking paver blocks of M -30 (M-thirty) grade of NTC or its equivalent with 23cm (Twenty three centimetres) diametre Half round stone ware pipe for drainage purpose laid over 25cm (twenty five centimetres) thick cement concrete 1:4:8 (One cement isto four sand isto eight graded) stone aggregate bedding complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 14 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete or other similar works including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 15 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings balconies and access platform or other similar works for upto plinth and all floors level including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 16 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and plain concrete work in stairs cases with slopping or stepped soffits, (excluding landing) except spiral staircase upto all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 17 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters buttresses, plinth and string courses, and other similar works complete upto plinth and all floors level including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 18 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillar, piers, abutments, post and struts square, cicular, rectangular, polygonal etcetera for upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 19 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera; with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels sides and soffits of beams haunchings, cantilevers, bressumers and lintels for upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 20 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and plain concrete work in edges of slab and breaks in floors and walls any thickness for upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 21 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuutering, strutting and propping etcetera with wooden battens and ballies for all height/depths and removal of the same for in situ-reinforced concrete and plain concrete work in window sills, cornice and moulding and the like upto all floors level including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 22 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and Chullah hoods, weather shades, chhajjas, corbels etcetera including edges, upto plinth and all floors level complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 23 | Providing and erection of Tor steel reinforcement Thermo Mechanically Treated bars of grade Fe-550D (five Hundred fifty -D) of (Sail / TATA Tiscon) for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per approved specifications, drawing, design, as per entire satsfaction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 24 | Providing and fixing concertina coil fencing with punched tape concertina coil 600mm (Six hundered millimetre) dia 10 (ten) metre openable length (total length 90m (ninety metre), having 50 (fifty) numbers rounds per 6 (six) metre length, upto 3m (three metre) height of wall with existing angle iron 'Y' shaped placed 2.4m (two point four metre) or 3.00m (three metre) apart and with 9 (nine) horizontal R.B.T. reinforced barbed wire, stud tied with Galvanised Iron staples and G.I. clips to retain horizontal, including necessary bolts or G.I. Galvanised Iron barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape (R.B.T.) / Spring core (2.5mm ( two point five millimetre) thick wire of high tensile strength of 165 ( one hundred sixty five) Per Kilogram/ sq.mm ( Squre millimetre) with tape (0.52 mm (zero point five two millimetre) thick) and weight 43.478 gm/ metre (forty three point four seven eight gram per metre) all complete as per the direction of Engineer-In-Charge, including carriage of materials within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 25 | Providing, fabrication and erection in position structural steel work of Tata / Sail Steel work welded in built up sections, in railling, brackets, gates, gratings framed guard bars, stringers, treads, landings etcetera of stair cases, including use of chequered plate and other similar works wherever required including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetera as required and works as per approved make all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 26 | Providing, fabrication and erection in position structural steel work of Tata / Sail riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 27 | Providing and fixing in position collapsible steel shutters of with vertical channels 20x10x2mm (twenty into ten into two millimetre) and braced with flat iron diagonals 20x5mm (twenty into five millimetre) size, with top and bottom rail of T-iron 40x40x6mm (forty into forty into six millimetre), with 40mm (forty millimetre) diametre steel pulleys, complete with bolts,nuts, locking arrangement, stoppers, handles, including applying apriming coat of approved steel primer including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 28 | Providing and fixing 50 mm (Fifty millimetres) diametre SST (Stainless steel) pipe handrail fixed with 35 mm (Thirty five millimetres) diametre stainless steel baluster as per detail in combination of 35 x 35mm (Thirty five into Thirty five millimetres) square and 15/20mm (Fifteen/twenty millimetres) SST pipe baluster knock down railing of KICH/Nipun/Jindal hand rail fixed on 10x50mm (Ten into fifty millimetres) stainless steel flat balusters placed at 1200 mm (One thousand two hundred millimetres) centre to centre along with 3 nos (Three Numbers @ 16 mm (Sixteen millimetres) mid rail connected at the side of the baluster with fixtures .The baluster would be fixed on the floor with casted base plate minimum 6mm (six millimetre) thick base plate shall be concealed with suitable S.S. 316 ( three hundred sixteen ) grade cover cap railing made of Hollow tubes, channels, plates etcetera including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etcetera , of required size, on the top of the floor or the side of waist slab with suitable arrangement complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 29 | Providing and fixing 50mm (Fifty millimetres) diametre SST (Stainless steel) pipe Of KICH/Nipun/Jindal handrail slip resistant in ramp at two level, having 75cm (Seventy five centimetres) and 90cm (Ninety centimetres) height welded with 25mm (Twenty five millimetres) diametre Stainless steel hollow pipe balusters embedded in cement concrete 60cm (Sixty centimaters) centre to centre and jointing with electrical gas welding at top alongwith hand rail of hollow Stainless steel pipe of 50mm (Fifty millimetres) diametre. It should extend 30cm (Thirty centimetres) beyond top and bottom of the ramp complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 30 | Providing and fixing angle iron frames for doors, windows and ventilators of Tata / Sail having mild steel channel sections of size 75x40x4mm (seventy five into forty into four millimetre) and Mild Steel angle 25x20x3mm (twenty five into twenty into three millimetre), joints mitred and welded by Mild Steel flat iron 40x12mm (forty into twelve millimetre) to the existing T- iron frame size 25x25x3mm (twenty five into twenty five into three millimetre), and Z-sections as per detail to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 31 | Providing and fixing Single rebate angle iron door,window,clerestory window frame manufactured from steel iron section of 40X40X5mm, (forty millimetre into forty millimetre into five millimetre) thickness including hinges jamb,lock jamb,beed and if required angle threshold ofmild steel angle 50X25 mm (fifty millimetre into twenty five millimetre) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimetre) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pre-treatment of the surface etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 32 | Providing and fixing first class deodar wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diametre and length , including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 33 | Providing and fixing double rebate door frame fabricated from sections roll formed out of 1.2mm (one point two millimetre) thick galvanized steel (Base steel as per IS 513) with zinc of 120 gms/sq.mtr (one hundred twenty grams per square metre). The overall size of the section should be 125x60mm (One hundred twenty five into sixty millimetre). The frame section should be cut to length and meter joined with corner brackets made of CRCA electroplated. The frame should be provided with (a) 3 Nos. (three numbers) of M.S. powder coated 100mm ( one hundred millimetre) Butt hinges of 2mm (two millimetre) thickness welded to the frame. (b) 6 Nos. (six numbers) of 1.2mm (one point two millimetre) thick CRCA electroplated stiffeners should be welded to frame. (c) 6 Nos. (six numbers) of 200mm (two hundred millimetre) M.S. hold fasts with split end tail welded to stiffener plates. (d) One number aldrop receiver.(e) Each frame should be provided with 25x50mm (Twenty five into fifty millimetre) tie rod at bottom. All welded places should be treated with protective coat of zinc rich primer. The entire frame should be provided with a coat of etched primer., all complete as per manufacturer's specification and direction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 34 | Providing and fixing factory made coloured powder coated/anodised aluminium work for frame of doors, windows, ventilators and glazed partitions of Jindal / Hindalco aluminium with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera (Section No. 14081 of Jindal / Hindalco etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 35 | Providing and fixing factory made coloured powder coated/ anodised aluminium work for shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge (Glazing and panel fill to be paid for separately). For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 36 | Providing and fixing factory made uPVC white colour sliding glazed window approved make of Fenesta, Aluplast, Encraft, upto all height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm (one decimal sixty millimetre plus minus zero decimal two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kilogram (forty kilogram), G.I fasteners 100 x 8 mm (one hundred into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws etcetera Profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etcetera After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge. Three track three panels sliding window with fly proof Stainless Steel wire mesh (Two numbers glazed and one no. wire mesh panels) made of (small series) frame 92 x 44 mm (ninety two into forty four millimetre) and sash 32 x 60 mm (thirty two into sixty millimetre) both having wall thickness of 1.9 ± 0.2 mm (one decimal ninety millimetre plus minus zero decimal two millimetre) and single glazing bead of appropriate dimension including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 37 | Providing and fixing 65 x 100mm (sixty five into one Hundred millimetre) factory made single extruded WPC (Wood Polymer Composite) solid doors/ windows / Celestory windows and other Frames / Chowkhat approved make of Alstone, Floresta, Ecoste, Century ply, comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with ful body threaded star headed SS screws having minimum frame density of 850 Kilogram/Per Cubic metre (Eight Hundred fifty kilogram per Per Cubic metre), screw withdrawal strength of 2200N (Face) and 1100N (Edge), minimum compressive strength of 58N/mm2 (fifty eight newton per millimetre square), modulus of elasticity 900N/mm2 (Nine Hundred newton per millimetre square), and resistance to spread of flame of CIass A category with property of being Termite / borer proof, water / moisture proof and Fire retardant and fixed in position with M.S hold fast / lugs / SS dash fasteners of required diametre and length including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 38 | Providing and fixing 35mm (thirty five millimetre) thick factory made singIe extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter approved make of Alstone, Floresta, Ecoste, Century ply in required size comprising of virgin polymer of K value 58 (fifty Eight) to 60 (Sixty) (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 (twelve) for 100gms (hundred grams)) having minimum density of 850 Kilogram/Per Cubic metre (Eight hundred fifty kilogram per Cubic metre) and screw withdrawaI strength of 1800 N (Eighteen hundred newton) (Face) and 900 N (Nine hundred newton) (Edge), minimum compressive strength 50 N/mm2 (fifty newton per sqaure millimetre), modulus of elasticity 850 N/mm2 (eight hundred fifty newton per sqaure millimetre) and resistance to spread of flame of Class A category with property of being Termite or borer proof, water or moisture proof and Fire retardant. WPC to be laminated with PVC foil of minimum 14 (fourteen) microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk, S.S screws, complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 39 | Provid ing and tixing 18mm (eighteen millimetre) thick factory made singIe extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board Iaminated with PVC foil of mininum 14 (fourteen) micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc . of required sizes comprising of virgin polymer of K value 58 to 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum (six hundred fifty kilogram per cubic metre) and screw withdrawaI strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm2, (fifty newton per sqaure millimetre) modulus of elasticity 850 N/mm2 (eight hundred fifty newton per millimetre square) and resistance to spread of flame of Class A category with property of being Termite or borer proof, water or moisture proof and Fire retardant. WPC to be laminated with PVC foil of minimum 14 (fourteen) microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunI‹ S.S screws, complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 40 | Providing and fixing 35mm (Thirty millimetre) thick both side commercial phenol bonded ISI Marked flush door shutter of CENTURY/ALPRO/ DURO PLY / GREEN PLY No.1S-2202 decorative type, core of block board construction to be finished with mica lamination of approved shade with frame of 1st (first) class hard wood and well matched ply veneering with vertical grain or cross bands and face veneering on both faces of shutters including black enameled Stainless steel butt hinges with necessary screws etcetera complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 41 | Providing and fixing 35mm (Thirty millimetre) thick factory made Decorative Pre-laminated (Vision panel) flush door shutter CENTURY/ALPRO/ DURO PLY / GREEN PLY No.1S-2202 both side commercial i.e non decorated phenol bonded termite resistant and boiling water proof ISI Marked, core of black board construction to be finished with mica lamination of approved shade with frame of 1st (first) class hard wood and well matched ply veneering with vertical grain or cross bands and face veneering on both faces of shutters with vision panel not exceeding 0.10 sqm (zero decimal one zero square metre) in all type flush including black enameled M.S butt hinges with necessary screws etcetera complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 42 | Providing and fixing 40mm thick First Class deodar wood panelled or panelled and glazed shutters for doors windows and clerestory windows having top rail 100x40mm (One Hundred into forty millimetre), style 100x40mm (One Hundred into forty millimetre), middle rail 150 x 40mm (One Hundred fifty into forty millimetre) and bottom rail shall be 200 x 40mm (Two Hundred into forty millimetre) infill with 16mm (Sixteen millimetre) thick first class deodar wooden plank and 6.0 mm (Six millimetre) thick float glass infill including brass butt hinges with necessary screws and 12x17.5mm (Twelve into seventeen point five millimetre) wooden beading, and lipping/ outer moulding 50x12.5mm (Fifty into twelve point five millimetre), complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 43 | Providing and fixing 40mm (forty millimetre) thick First class deodar wood.wire gauge shutters for door, windows and ventilators having each rail and styles of size of 100x40mm (one hundred into forty millimetre) by using galvanised S.S. wire gauge of I.S. gauge designation 85g. (eighty five gauge) With wire of dia 0.56mm (zero decimal fifty six millimetre) for doors, windows and clerestory windows complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 44 | Providing and fixing 25mm (Twenty five millimetre) thick one side prelaminated water proof commercial board of green ply/Century Ply / kit ply/Dura ply/Marino exterior/interior grade ISI marked No. 12823 for SDB shutters with 6mm (Six millimetre) thick hard wood edging all round and PGI sheet lining inside of the shutters of approved shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 45 | Providing and fixing 25mm (Twenty five millimetre) thick shutters of commercial Board water proof shutters for cup boards of Century Ply / Dura ply / kit ply / Green ply / Marino ply including fixing of beading and stainless steel butt hinges with screws etcetra and finished with 25x6mm (twenty five into six millimetre) hard wood lipping / edging complete as per approved make complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 46 | Providing and fixing 25mm (Twenty five millimetre) thick panelled or panelled and glazed shutters of commercial Board water proof shutters of Century Ply / Dura ply / kit ply / Green ply / Marino ply for cup boards including fixing of 4.0mm (four decimal zero millimetre) thick float glass with beading and stainless steel butt hinges with screws etcetra and finished with 25x6mm (twenty five into six millimetre) hard wood lipping/edging complete as per approved make complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 47 | Providing and fixing 19mm (fifteen millimetre) thick Commercial board waterproof termite resistant proof shutters for cup boards and finishing the edges with 19x6mm (fifteen millimetre into six millimetre) hardwood beading including fixing with SS piano hinges with screws etcetera complete of Nova pan / Kit ply / National / Archidply / Action Tesa / Green Ply including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 48 | Providing and fixing 19mm (nineteen millimetre) thick water proof commercial board of Century Ply / Dura ply / kit ply / Green ply / Marino ply in shelves/box for cup board with butt joints and fixing with nails and screws etcetra as per approved make complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 49 | Providing and fixing complete box with 19mm (nineteen millimetre) thick shelves and internal partition shall be made of 19 mm (nineteen millimetre) thick waterproof termit resistant commercial board of Century Ply / Dura ply / kit ply / Green ply / Marino ply with butt joints and fixing with nails and screws etcetra and back side of cup board shall have 8mm (one millimetre) thick waterproof ply .The shutters from all side also have 6mm (six millimetre) thick hard wood edges / lipping all round been mix fnished both side with 1 mm (one millimetre) thick lemination of as per approved make complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 50 | Providing and fixing water proof 8.0mm (eight millimetre) thick ply of standard quality ISI mark of Uniply/Green ply/Kit ply/Marino ply and approved shade and colour in panelling and wall linning including mitring at junctions, butt jointing and nails complete including frame work of 50x31mm (fifty into thirty one millimetre) soft wood grid frame work at 600 mm C/C (six hundred millimetre centre to centre) of paneling, having approved make complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 51 | Providing and fixing 1.00mm (one millimetre) thick colored and decorative high pressure laminated sheet of Century Ply/ Green Ply/Action Tessa/Marino Ply of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S,including cost of adhesive of approved quality complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 52 | Providing and fixing 1st (first) class deodar wood plain square edged cover fillets (beading) 50mmx25mm (fifty millimetre into twenty five millimetre) section, with wood screws in ceiling and lining including mitring at junction complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 53 | Providing and fixing 6.0 mm (six milimetre) thick toughened glass panes (weight not less than 15.00 Kilogram/ Square Metre) (Fifteen point zero kilogram per sqaure metre) Glass panes of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 54 | Providing and fixing 6.0mm (Six millimetre) thickness float glass panes (weight not less than 15.00 Kilogram/ Square Metre) (Fifteen point zero kilogram per sqaure metre)of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 55 | Providing and fixing hermetically sealed double glass units 6 mm (Six millimetre) thickness (weight not less than 15.00 kg/ sqm) (Fifteen point zero zero kilogram per sqaure metre) float Glass of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera both side, having 12 mm (twelve millimetere) air gap filled with argon gas, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 56 | Providing and fixing 5.0mm (Five millimetre) thick froasted glass panes (weight not less than 12.5 Kilogram/ Square metre) (Twelve point five kilogram per sqaure metre) Glass panes of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 57 | Providing and fixing 12mm (Twelve milimetres) thick Phenol bonded (both Side ) prelaminated BWP grade particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 of Action Tesa / Century / Greenlam / Merinolam / Kitlam / Vista of approved shade Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-In-Charge. .The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GS |
| 58 | Providing and fixing Fly proof stainless steel grade 304 (three Hundred four) wire guage with 0.5mm (Zero point five millimetres) diametre wire and 1.4mm (One point four millimetres) wide aperture for doors windows and clerestory windows with necessary screws complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 59 | Providing and fixing M.S. (Mild steel) grills of require pattern in wooden/steel frames of windows etcetera with 12 x 6mm (Twelve into six millimetre) Mild Steel Flats in combination with 10 x 10 mm (Ten into Ten millimetre) square bars with round headed bolts and nuts or by screws complete all as per Drawing and Techanical Specifications including entire carriage of materials within all leads, lifts and other incidentals, as per approved and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 60 | Providing and fixing 8mm (Eight millimetre) thick anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved make (Hindalco/Jindal) and as per approved design/pattern,with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm (at the rate two Hundred millimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete at all levels including entire carriage of material upto all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 61 | Providing and fixing 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheet (ISI Marked-Z 120) of Tata Durashine / Sail / JSW colouron, in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) diametre with prepainted limpet and rubber washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 62 | Providing and fixing factory made ridges or hips having proper gola shape 60 cm (Sixty centimetres) overall with 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheets of Tata Durashine / Sail / JSW colouron in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) dia and prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 63 | Providing and fixing valley 90cm (Ninety centimetres) overall 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine / Sail / Reliance / JSW colouron in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) dia with prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 64 | Providing and fixing flushing 38 cm (Thirty eight centimetres) overall with 0.60 mm (Zero point sixty millimetres) thick prepainted sheet of Tata Durashine / Sail / Reliance / JSW colouron in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating and back coat of polyester of 5 microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diameter and prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 65 | Providing and fixing 30cm (Thirty Centimetre) wide 25cm (Twenty five centimetre) deep 0.60mm (Zero point six zero millimetres) thick prepainted plain Preprinted Galvanised Iron sheet gutter of Tata / Sail having dome shape grating fixed with bolts, nuts and washers etcetera including making necessary connections with rain water pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 66 | Providing and fixing M.S. B.P. sheet 2.0mm (Two point zero millimetres) thick eaves board/facia/soffits/ceiling of TATA / Jindal / Sail including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-In-charge, (Base members of steel work shall be measured and paid separately) including fixing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 67 | Providing and fixing mild steel brackets made of TATA/ Sail with vertical post 100x50mm (Hundred into fifty millimetre), main frame of 50x50x3.0mm,( Fifty into fifty into three millimetre) distribution member shall be 25x25mm ( twenty into twenty five millimetre), hollow pipe of specified shape, projecting 450mm (four Hundred fifty millimetre) outside the wall surface and 450mm (four Hundred fifty millimetre) length fixed on wall with 4 (four) numbers, 6mm (six millimetre) diametre expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etcetra. The side M.S flat for brackets and centre piece shall be welded and fixed with M.S. nuts, bolts, and washers of size 25x3mm (twenty five into three millimetre), one bolts on Each side on the both sides of 50x50mm (ifty into fifty millimetre) hollow pipe, total length is 900mm (nine Hundred millimetre) and angular length is 425mm (four Hundred twenty five millimetre) including fixing complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 68 | Providing and fixing decorative screen in corridor TATA /Sail, manufactured with 25mm x 25mm (twenty five millimetre into twenty five millimetre) hollow square pipes welded with mild steel hollow sections of size 50 x 50mm (fifty into fifty millimetre), supported on 10 cm (ten centimetre) diametre mild steel hollow pipes. A centre piece shall be of 25 x 3mm (twenty five into three millimetre) mild steel flat frame covered with Mild Steel black sheet with flower pattern, made to shape and applying a priming coat of approved steel primer using structural steel complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 69 | Providing and fixing 600x600x6mm (six Hundred into six Hundred into six millimetre) Aluminium Composite Panel ceiling of Alstone,Aludecor,Eurobond, Alstrong with pre-painted GI channel framing @600mm (at the rate six hundred millimetre) centre to centre with suitable screw complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 70 | Providing and fixing plaster of Paris (gypsumanhydrous) ceiling for all floor level in combination with 12mm (twelve millimetre) thick second deodar wood for all floor level, over hot dipped galvanized steel sections (galvanized @ 120 grams/Square metre (one hundred twenty grams per square metre), both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38mm ( twenty four into thirty eight millimetre) made from 0.30 (zero point three zero millimetre) mm thick (minimum) sheet on desired grid with 10mm (ten millimetre) gap in between and reinforced with rabbit wiremesh fixed to G.I. frame and forming 4x4mm (four into four millimetre) uniform groove complete as per architectural drawings and approved pattern including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 71 | Providing and fixing plaster of Paris (gypsumanhydrous) ceiling for all floor level, over hot dipped galvanized steel sections (galvanized @ 120 grams/Square metre (one hundered twenty grams per square metre), both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38mm ( twenty four into thirty eight millimetre) made from 0.30mm (zero point three zero millimetre) thick (minimum) sheet on desired grid with 10mm (ten millimetre) gap in between and reinforced with rabbit wiremesh fixed to Galvanised Iron frame complete as per architectural drawings and approved pattern including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 72 | Providing and fixing 600x600x6mm (Six hundred into six hundred into six millimetre) designer fiber board of Everest, Alstone,Aludecor,Eurobond, Alstrong (E-Board) ceiling with hot dipped galvanized steel sections (galvanized @ 120 grams/Square Metre (at the rate one hundred twenty grams per square metre) channel framing @ 600mm (at the rate Six hundred millimetre) Centre to Centre complete including curing complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. . |
| 73 | Providing and fixing 15mm (Fifteen millimetre) thick false ceiling tiles at all heights of size 600x600mm (Six hundered into Six hundered millimetre) dune RH 99 tiles of armstrong mineral fiber tiles of gyproc with wood wool backing 50mm (fifty millimetre) thick layer and Rai wood border of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99% (Ninety nine percent), Light Reflectance > 85% (Eighty five percent), Thermal Conductivity k = 0.052 - 0.057 w/m K (zero point zero five two - zero point zero five seven) , Fire Performance as per (BS 476 pt - 6 &7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm (Zero point Three Three millimetre) thick (galvanized @120 gsm) (at the rate One hundered twenty grams per square metre) comprising of main T-runners of 15x32mm (Fifteen into thrity two millimetre) of length 3000 mm, (Three thousand millimetre) cross-T of size 15x32mm (Fifteen into thrity two millimetre) of length 1200 mm (One thousand two hundred millimetre) and secondary intermediate cross T of size 15x32 mm (Fifteen into thrity two millimetre) of length 600 mm ( six hundred millimetre) to form grid module of size 600x600 mm (Six hundered into Six hundered millimetre) suspended from ceiling using galvanized mild steel item (galvanised @ 80gsm) (At the rate Eighty grams per square metre ) 50mm (Fifty millimetre) long 8 mm (Eight millimetre) outer diameter M-6 (M-Six) dash fasteners, 6 mm (Six millimetre) diameter fully threaded hanger rod up to 1000 mm (One thousand millimetre) length and L-shape level adjuster of size 85x25x2 mm, (Eighty five onto twenty five into Two millimetre) spaced at 1200 mm (One thousand two hundered millimetre) centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size 24x24x3000 mm (Twenty four into Twenty four into Three Thousand millimetre) made of 0.40 mm (Zero point four zero millimetre) thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm (Four hundered fifty millimetre) centre to centre and 40 mm (Forty millimetre) long dry wall stainless steel screws complete. The exposed bottom portion of all Tsections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights.complete including curing complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 74 | Providing and construction of 30cm (thirty centimetre) thick Cavity wall second class common burnt clay building bricks with 7cm (Seven centimetre) in wide cavity and consisting 11.5 cm ( Eleven decimal five centimetre) thick inner and outer wall laid in Cement mortar 1:4 (One cement isto four sand) and strength with hoop iron and bituminious coated cross ties including making weep hole and vent pipe complete 2 Nos. (two numbers ) 6/8 ( six oblique eight ) width brass in Z- shape crossing each other shall be provided at the interval 90-100 cm ( ninety to hundred centimetre) length horizontal and vertical in cavity wall and curing complete (The mesurement of wall faces only one side will be considered for payment) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 75 | Providing and laying of brick work using Second class common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 76 | Providing and laying of of half brick masonary with second class common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in superstructure above plinth up to all floor level in cement mortar 1:4 (One cement isto four sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 77 | Providing and construction of second class half brick masonary for shaft with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to all floor levels in Cement Mortar 1:4 (one cement: four course sand) and strength with hoop iron and bituminious coated cross ties including making weep hole and vent pipe complete 2 Nos. (two number ) 6/8 ( six / eight ) width brass in Z- shape crossing each other shall be provided at the interval 90-100cm (ninety to hundred centimetre) length horizontal and vertical in cavity wall and curing complete). The measurement of wall faces only one side will be considered for payment), complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 78 | Providing and construction of random rubble masonry with hard stone in foundation, plinth, retaining or returning/breast walls and other similar works including levelling up with cement concrete 1:6:12 (one cement isto six coarse sand isto twelve graded stone aggregate 20 mm (twenty millimetre) nominal size) upto plinth level with Cement mortar 1:6 (one cement isto six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 79 | Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 80 | Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in two coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 81 | Providing and plastering 6mm (Six millimetres) thick cement plaster to ceiling in cement mortar 1:3 (One cement : three sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 82 | Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth with cement mortar 1:5 (One cement isto five sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 83 | Providing and plastering of 15mm Cement plaster in cement mortar 1:5 (one cement isto five sand) on surface of brick/ concrete/ stone walls including forming groove of uniform size from 12x12 mm (twelve into twelve millimetre) and upto 25x15 mm (twenty five into fifteen millimetre) in the top layer of plastered surface as per approved design and pattern having 230mm c/c (two Hundred thirty millimetre centre to centre) horizontally equal wideness and finishing of groove complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 84 | Providing and plastering 12mm (twelve millimetre) thick and 100mm (One Hundred millimetre) wide plain cement mortar bands in cement mortar 1:4 (one cement : four fine sand) surface of brick/concrete/ stone walls for exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 85 | Providing and laying 600x 600mm (Six hundred into six hundred millimetre), 10mm (ten millimetre thick) Double Charge / Ultra Charge vitrified tiles of Nitco /Kajaria / Simpolo /Johnson / Somany of approved shade and design, in flooring laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 86 | Providing and laying 600x 600mm (Six hundred into six hundred millimetre), 10mm (ten millimetre thick) Double Charge / Ultra Charge vitrified tiles of Nitco /Kajaria / Simpolo /Johnson / Somany of approved shade and design, in flooring laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 87 | Providing and laying 600x600 mm (Six hundred into six hundred millimetres), 10mm (ten millimetre) thick Full body anti skid Vitrified tiles of Nitco /Kajaria / Simpolo /Johnson / Somany of approved shade and design, in flooring laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement : four sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 88 | Providing and laying (600x600x10)mm (Six Hundred into Six Hundred into ten millimetres) full body anti skid vitrified tile of Nitco /Kajaria / Simpolo /Johnson / Somany as per approved shade and design of the office and thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand) jointing with grey cement slurry @ 3.3 Kilogram/ Square metre (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 89 | Providing and laying 600x1200 mm (Six hundred into twelve hundred millimetres), 10mm (ten millimetre) thick Full body anti skid Vitrified tiles of Nitco /Kajaria / Simpolo /Johnson / Somany of approved shade and design, in flooring laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 90 | Providing and laying (600x1200)mm (Six Hundred into twelve Hundred millimetre), 10mm (ten millimetre thick) full body anti skid vitrified tile of Nitco /Kajaria / Simpolo /Johnson / Somany as per approved shade and design of the office and thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand) jointing with grey cement slurry @ 3.3 Kilogram/ Square metre (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 91 | Providing and laying (600x1200)mm (Six hundred into Twelve hundred), 10mm (ten millimetre thick) vitrified tiles with glossy finish of Nitco /Kajaria / Simpolo /Johnson / Somany as per approved shade and design of the office and thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement istoThree coarse sand) jointing with grey cement slurry @ 3.3 Kilogram/ Square metre (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 92 | Providing and laying 300x600mm (Three hundred into Six hundred millimetre), 10mm ( ten millimetre) thick first quality ceramic wall tiles of Nitco /Kajaria / Simpolo /Johnson / Somany in skirting risers of steps and dados with cement mortar 1:3 (One cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 93 | Providing and laying mirror polished 25mm (Twenty five millimetre) thick Kota stone minimum Size 55x55cm (Fifty five into Fifty five centimetre) of uniform colour with 7.5cm (Seven decimal five centimetre) wide black granite band of same shade that of flooring of approved shade as per detail slab flooring over 20 mm (twenty millimetre) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (One cement isto Four coarse sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 94 | Providing and laying Kota stone slabs 20mm (Twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement isto Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 95 | Providing and laying 19 mm (Nineteen millimetre) thick Sadar Ali / Red lakha polished Granite stone flooring in combination with 10/15cm (ten oblique fifteen centimetre) wide black Granite band as per pattern and detail laid over 20mm(Twenty millimetre) thickness base of cement mortar 1:4 (One cement : four sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing, etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 96 | Providing and laying 19mm (Nineteen millimetre) thick Polished Black/ Grey / Lakha Red Granite Stone having Semi Round nosing in work top of Kitchen/ Reception/ Pantry / under counter wash basin and water trough laid over 20mm (twenty millimetre) thickness base of cement mortar 1:3 (One cement isto Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 97 | Providing and fixing 19 mm (nineteen millimetre) thick Sadar Ali / Red lakha / black of required shade leather finished Granite stone with uniform double round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for tread of steps and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 98 | Providing and fixing 19 mm ( Nineteen milimetres) thick polished Grey / Sadar Ali/ Red lakha / black Granite single slab in risers of steps, skirting, dado and pillars laid on with special adhesive over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement isto three coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade including rubbing and polishing complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 99 | Providing & fixing in position 8mm (Eight millimetre) thick HDF (High Density Fibreboard) AC-4 (Abrasion grade - four) flooring with planks consists a melamine film coating one side and aluminium oxide coated tissue on another side of plank (Armstrong or its equivalent), issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded poly ethylene foam sheets having density 40Kilogram/Cubic metres, over prepared surface with necessary quarter round planks of size 1900mm x 18mm (nineteen hundered into eighteen millimetre) and door reducer of size 1900mm x 44mm (nineteen hundered into forty four millimetre) , wherever required. The wood planks shall have minimum density of 1000 Kg/cum (One thousand kilogram per cubic metre) & minimum Hardness 1000 Kgf (One thousand Kilogram force). with Eco friendly UV coating, all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 100 | Providing & fixing in position 8mm (Eight millimetre) thick HDF (High Density Fibreboard) AC-4 (Abrasion grade - four) in wall skirting with planks of sizes (Armstrong or its equivalent), 1900mm (nineteen hundered millimetre) length and 85mm (eighty five millimetre) wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The skirting shall be fixed with SS screws & rawl plugs, over underlayment of 4mm thick, expanded poly ethylene foam sheets having 40Kilogram/Cubic metres density over prepared surface. The bomboo wood planks shall have minimum density of 1000 kg/cum (One thousand kilogram per cubic metre) & minimum Hardness 1000 Kgf (One thousand Kilogram force). with Eco friendly UV coating, all as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 101 | Providing & fixing in position 25mm (Twenty five millimetre) thick first class deodar wooden planks jointed with tongued & grooved in flooring fixing to wooden boards with iron screws complete (base wooden to be paid separately), including carriage of material up to all leads and lifts and as per direction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 102 | Providing & fixing in position 19mm (Nineteen millimetre) thick moisture resistant commercial teak ply wood flooring fixing on wooden or steel base frame with iron screws complete (base wooden or steel frame to be paid separately), including carriage of material up to all leads and lifts and as per direction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 103 | Providing and fixing 40mm (forty millimetre) wide 20 mm (twenty millimetre) thick broda green marble stone strip moulding above panneling work / tile work / other similar work, including machine polishing to edge to give high gloss finish etcetra complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 104 | Providing, supplying and fixing factory-made modular wooden slat acoustical wall panels of approved make and shade (e.g. Himalayan Acoustics “Wood Lot” FR Grade (2430 x 131 x 16)mm (two thousand four hundred thirty into one hundred thirty one into sixteen millimetre) or equivalent), made of medium density fibreboard (MDF) with acoustical fleece backing, designed for sound absorption of minimum NRC 0.60 (noise reduction coefficient zero point six zero) as per ISO 354 / ASTM C423 (ISO three five four/ASTM Cfour two three), each panel manufactured to fire-retardant grade (FR Grade MDF) having tongue-and-groove interlocking edges with groove spacing between 4 mm to 28 mm (four millimetre to twenty eight millimetre) for seamless alignment, of density 750–800 kg/m³ (seven hundred fifty to eight hundred kilogram per cubic metre), incorporating linear or micro-perforations on rear face backed with acoustical fleece for enhanced absorption and dust protection, fixed on wall using 15 mm (fifteen millimetre) aluminium alloy 6063-T6 profiles(six zero six three-T six profile) conforming to BS 1474:1987 (British Standard one four seven four colon nineteen eighty seven), with G.I. lock-in clips on the back of tongue and groove system, mounted on G.I. / aluminium / timber framework true to line and level, including edge trims, aluminium clips, profiles, screws, anchors, and accessories, with cut-outs for electrical, AV, lighting and fire-fighting fixtures, complete as per recommendation and direction of Engineer-in-Charge; the panels finished with low-VOC PU / melamine lacquer coating (low volatile organic compound polyurethane / melamine lacquer coating) of approved shade and texture, meeting performance parameters of NRC ≥ 0.60 (noise reduction coefficient greater than or equal to zero point six zero) ISO 354 / ASTM C423 (ISO three five four/ASTM Cfour two three), fire performance as per BS 476 (Part 6 & 7) (British Standard four seven six part six and seven), Class 1 (class one) surface spread of flame, thermal conductivity ≤ 0.043 W/m·K (less than or equal to zero point zero four three watt per metre kelvin) as per ASTM 518:1991 (ASTM five one eight : nineteen hundred ninety one), humidity resistance 100% (one hundred percent), galvanised steel frame section (when used) 0.50 mm (zero point five zero millimetre) thick galvanised @120 g/m² (galvanised at one hundred twenty gram per square metre) on both sides, and light reflectance ≥ 85% (greater than or equal to eighty five percent) for light-coloured finish, including all materials, transportation, scaffolding, wastage, labour, finishing, edge banding, and incidentals, complete in all respects as per directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 105 | Providing and fixing 20mm (twenty millimetre) thick \\"APHONY GLOSS\\" wood fibre cement composite acoustic tiles of size 600x600mm (Six hundred into six hundred millimetre) with square edge, factory finished in approved colour or gloss shade of \\"Himalyan Acoustics\\" make or its approved equivalent, wall cladding over the wall surface above finished floor level up to ceiling level (above the WOODLOT panelled dado portion), having Noise Reduction Coefficient (NRC) of 0.85 (zero decimal eight five) as per ISO 354/ASTM C423, STC of 47 as per ASTM E90/413 for 25mm (twenty five millimetre), Density 400Kg/m³, meets stringent Fire Ratings ASTM D-876 and BS:476, weather resistance as per IS 3308, Thermal Insulation as per IS:3346 1980 with relative humidity of 90% (ninety percent) RH at 60° Celcius (140° Fahrenheit) for 15 (fifteen) days = No deterioration. Confirms to EN 131682001 and are RoHS Compliant and to be installed with Aluminium H Profile on G.I Stud and long life with a backing of 500 GSM absorb wool tested as per Fire Retardant ASTM D 635-1991/Insulation and IS 15061-2002 for excellent results, including cutting of tiles to size and shape, providing cut-outs/openings for switch boards, fixtures etc. as required, and clearing away debris complete in alll respect as per entire satisfaction and direction of the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 106 | Providing and fixing at all height wall panelling with 19mm (nineteen millimetre) water proof & termite resistant teak ply conforming to IS:13958-1994 including fixing to frame work made of 50mm x 50mm (fifty millimetre into fifty millimetre) on 600mm (six hundred millimetre) centre to centre with hard wood frame including cutting brick work and fixing in cement mortar and making good the wall etcetera and also providing and fixing first class teak wood moulded cornice 55 x 30mm (fifty five into thirty milimetre) and 25x12 mm (twenty five into twelve millimetre) beading of triangular shape to the junction of panelling etcetera with iron screws all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 107 | Providing and fixing 25mm (Twenty Five millimetre) thick in wall lining panel for (TV) TeleVision with medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with including providing and fixing to frame work made of 50mm x 31mm (Fifty into thirty one millimetre) on 600mm (Six hundred) centre to centre with hard wood frame including cutting brick work and fixing in cement mortar and making good the wall etcetra arrangement and screws etcetra complete with iron screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 108 | Providing and fixing 4mm (Four millimetre) one side decorative veneer of CENTURY/ALPRO/ DURO PLY / GREEN PLY, conforming to IS: 1328 (type-1), for plain lining or cladding on wall panneling, wooden ceiling or other similar places, including cost of adhesive of approved quality including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 109 | Providing and laying 50 mm (fifty millimetre) thick cement concrete flooring 1:2:4 (one cement isto twenty sand isto four graded stone aggregate 20 mm (twenty millimetre) nominal size) laid in one layer finished with a floating coat of neat cement as per directions and entire satisfaction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 110 | Providing and laying 300x300x25 mm (Three hundred into three hundred into twenty five millimetres) Labrador Design (Rainbow Series) tiles of NTC / Unistone / Atlantic in flooring in ramp for person with disability on 20mm (Twenty millimetres) average thick base of cement mortar 1:4 (One cement isto four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish as per architect standred design and specification complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 111 | Providing and laying 600mm x 600mm (Six Hundred millimetre into Six Hundred millimetre) Heat Resistant Terrace Tiles of Somany / Oreint & bell, with 10mm (Ten millimetre) thickness having SRI (solar refractive index) > 78 (Sevety Eight) , solar reflection > 0.70 (Zero point Seventy) and initial emittance>0.75 (Zero point Seventy Five) on waterproof and sloped surface of terrace, on 20mm (Twenty millimetre) thick bed of cement mortar 1:4 (One cement isto four coarse sand) and making 3-4mm (three to four millimetre) wide groove & grouting the joints with epoxy of required shades, including rubbing and polishing of the surface upto 3 (Three) cuts complete, including providing skirting upto 150mm (One hundred fifty millimetre) height along the parapet walls in the same manner including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 112 | Providing and laying 12mm (twelve millimetre) thick Unistone / NTC / Atlantic stone cladding on wall surface with 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including scaffolding complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 113 | Providing and laying 60mm (Sixty millimetre) thick factory made cement concrete interlocking paver block of M-35 M-thirty five) grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern of NTC/ Atlantic make and including 50mm (fifty millimetre) thick compacted bed of coarse sand, filling the joints with fine sand etcetera all complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 114 | Providing and laying 80mm (eighty millimetre) thick factory made cement concrete interlocking paver block of M-40 M-forty) grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern of NTC/ Atlantic make and including 50mm (fifty millimetre) thick compacted bed of coarse sand, filling the joints with fine sand etcetera all complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 115 | Providing and fixing (230 x 75)mm (two hundred thirty into seventy five millimetre) with 20mm (Twenty millimetre) thick Pioneer brick or its equivalent tile in all shades and texture (classic, vintage, heritage collection) jointed with cement adhesive 1:1 (One cement isto one adhesive) laid in position superstructure including making a uniform grrove of 10mm (ten millimetre) admixed with pigment of matching shade, including rubbing, curing, polishing and including silicon coating etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 116 | Providing and applying Birla / J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface upto floor all level complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 117 | Providing and painting walls with 100% (one hundred percent) premium emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (Fifty gram/per litre) and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade with silicon additives for new work (Two or more coats applied @ 1.43 litre/ 10 sqm. (One point forty three litre per ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (Zero point ninety litre/per ten square metre) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 118 | Providing and painting two coats wall painting with Plastic emulsion paint of approved brand and manufacture to give an even shade complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 119 | Providing and painting two coats with silicon and acrylic emulsion of Asian Paints/ Dulux /Berger paints /Nerolac Suraksha paints for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 120 | Providing and painting with acrylic washable emulsion of Asian Paints/ Dulux /Berger paints/Nerolac Suraksha paints for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 121 | Providing and painting walls with weather proof exterior emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (Fifty gram/per litre) and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade with silicon additives for new work (Two or more coats applied @ 1.43 litre/ 10 sqm. (One point forty three litre/per ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (Zero point ninety litre/per ten square metre) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 122 | Providing and finishing surface with Epoxy paint (two or more coats) on steel work at all locations prepared and applied as per approved make of Asian paints / Dulux paints / Nerolac suraksha paints / Berger Paints including preparation of surface, etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 123 | Providing and painting with oil type wood preservative of (Asian Paints/ Dulux /Berger paints/Nerolac Suraksha paints) for new wood work by applying two or more coats, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting etcetera complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 124 | Providing and applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matters sand papering and knotting of readymixed paint brushing with white lead for priming of Asian paints / Dulux /Berger paints/Nerolac Suraksha paints complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 125 | Providing and polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 126 | Providing and painting two coats (including priming coat) on over new wood and wood based surfaces with enamel paint of Nerolac/ Asian brushing to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 127 | Providing and painting two coats (including priming coat) on over new concrete / masonry/ plastered surfaces with enamel paint of Nerolac/ Asian brushing to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 128 | Providing and laying Damp Proof Course 50mm (Fifty millimetre) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded/crushed stone aggregate) 20mm (Twenty millimetre nominal size) and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 129 | Providing and applying a coat of residual petroleum bitumen of grade VG-10 (Viscosity grade-Ten) of approved quality using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 130 | Providing and laying water proofing treatment with water proof compound of approved grade of Dr. Fixit / Asian in sunken portion of WCs, bathroom etcetera, by applying cement slurry mixed with water proofing cement compound consisting of applying:i) Ist course of applying cement slurry @ 0.488 kg/sqm (at the rate zero decimal four eight eight kilogram per square metre) mixed with water proofing compound @ 0.253 Per Kilogram/ Per square metre (at the rate zero decimal two five three kilogram per square metre). This layer will be allowed to air cure for 4 (four) hours.ii) Second layer of slurry of cement @ 0.242kg/sqm (at the rate zero decimal two four two Kilogram Per square metre) mixed with water proofing cement compound @ 0.126kg/sqm (at the rate zero decimal one two six Kilogram/Per square metre). This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 131 | Providing and laying Dr. Fixit Torch Shield (P-3160-3mm), APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm (three millimetre) thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/Per Square Metre (at the rate zero point forty litre per square metre) by the same membrane manufactured of density at 25°C, 0.87 - 0.89 Per Kilogram/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etceteraetera, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm (five centimetre) . Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM,D -5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 132 | Treatment of soil under proposed floors in proportion of dilute compound by using 1.0 (one) litre water @ 2.5 (at the rate two decimal five) millilitre chemical emulsion (Imidacloerid 30.5% SC) and using diluted compound @ one litre per hole, 300 mm (three hundred millimetre) and laying of PVC pipes condiuts of approved make (Termi Pores/ Irrigate Pores) apart including drilling 12 mm (twelve millimetre) diameter holes and plugging with cement mortar 1:2 (one cement isto two Coarse sand) to match the floor. The laying of material shall be got done through the authorised applicator of the manufacturer of material including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 133 | Providing and fixing first class deodar wood 12mm (Twelve millimetre) thick and 100mm (Hundred millimetre) wide pelmet and brackets including fixing with 25x3mm (Twenty five into three millimetre) mild steel flat 10cm (Ten centimetre) long and plugs etcetra all complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 134 | Providing and fixing aluminum U beading 2.5mm (two decimal five millimetre) thick of required size to Pre-laminated/ flush door shutter, including fixing and carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 135 | Providing and fixing 125mm (one hundred twenty five millimetres) nominal size double acting spring hinges with necessary brass screws complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 136 | Providing and fixing 125x75x4 mm (one hundred twenty five into seventy five into four millimetre) ISI marked CED coated self closing hinges fitting with as per required colour or shade with necessary SS 304 grade screws etcetra complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 137 | Filling the gap upto 5mm (five millimetre) depth and 5mm (five millimetre) width in between steel/aluminium/uPVC frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 138 | Providing and fixing 300x16mm (Three Hundred into Sixteen millimetres) nominal size bright/matt finished Stainless steel sliding door bolts ISI marked or approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 139 | Providing and fixing 250x16mm (Two Hundred fifty into Sixteen millimetres) nominal size bright/matt finished Stainless steel sliding door bolts ISI marked or approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 140 | Providing and fixing 100x16mm (One Hundred into Sixteen millimetres) nominal size bright/matt finished Stainless steel sliding door bolts ISI marked or approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 141 | Providing and fixing 250x16mm (two hundred fifty into Sixteen millimetres) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 142 | Providing and fixing 100x16mm (one hundred into Sixteen millimetres) nominal size aluminium sliding door bolts ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 143 | Providing and fixing 250x10mm (Two Hundred fifty into Ten millimetres) nominal size bright/matt finished Stainless steel Tower bolts (barrel type), ISI marked or approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 144 | Providing and fixing 100x10mm (One Hundred into Ten millimetres) nominal size bright/matt finished Stainless steel Tower bolts (barrel type), ISI marked or approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 145 | Providing and fixing aluminium 200x10mm (Two hundred into Ten millimetres) nominal size Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 146 | Providing and fixing aluminium 150x10mm (One hundred fifty into Ten millimetres) nominal size Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 147 | Providing and fixing 150x10mm (One hundred fifty into Ten millimetres) nominal size oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 148 | Providing and fixing 100x10mm (One hundred into Ten millimetres) nominal size oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 149 | Providing and fixing bright finished Chromium plated brass 100 x 65mm (one hundred into sixty five millimetre) mortice latch and lock with 6 (six) levers and a pair of lever handles and key provision / arrangement of approved quality with necessary screws etcetra complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 150 | Providing and fixing bright finished cylinderical Chromium plated brass 165 x 75 mm (one hundred sixty five into seventy five millimetre) mortice latch and lock without key provision of approved quality with necessary screws etcetra complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 151 | Providing and fixing 65x35mm (Sixty five into thirty five milllimetres) special quality bright finished brass cup-board locks or ward robe locks with six levers including necessary screws etcetra (Indian make of approved quality) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 152 | Providing and fixing Double strip (horizontal type) 150mm (one hundred fifty millimetre) size of magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etcetra complete, as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 153 | Providing and fixing powder coated telescopic drawer channels 450 mm (four hundred fifty millimetre) long with necessary screws etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 154 | Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 155 | Providing and fixing 256mm (two hundred fifty six millimetre) size of Aluminium Concealed Pull Handle with neceassary screws etcetra all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 156 | Providing and fixing bright /matt finished Stainless Steel 304 Grade 125mm (one hundred twenty five millimetre) drawer of approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 157 | Providing and fixing bright /matt finished Stainless Steel 304 Grade 300mm (Three hundred millimetre) drawer of approved quality and make with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 158 | Providing and fixing 200mm (Two hundred millimetres) nominal size aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 159 | Providing and fixing 100mm (One hundred millimetres) nominal size aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 160 | Providing and fixing 125mm (One hundred twenty five millimetres) nominal size M.S. Handles ISI marked with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 161 | Providing and fixing 100mm (One hundred millimetres) nominal size M.S. Handles ISI marked with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 162 | Providing and fixing aluminium hanging floor Twin door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 163 | Providing and fixing aluminium hanging floor Single door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 164 | Providing and fixing 250mm (two hundred fifty millimetres) nominal size aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 165 | Providing and fixing Anodised Aluminium Casement stay 150 mm (one hundred fifty millimetre) casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera complete complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 166 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 Per Kilogram (one hundred twenty five kilogram), for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 167 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 Per Kilogram to 80 Per Kilogram (thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (seven hundred one millimetre to one thousand millimetre), with double speed adjustment with necessary accessories and screws etcetera complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 168 | Providing and fixing of expansion joint, floor Joint of 40 mm (forty millimetre) gap, system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etcetera as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical location in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s preengineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures complete, (Material shall confirm to ASTM 6063). including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 169 | Providing and fixing sheet covering over expansion joints with iron screws as per design, Aluminium fluted strips 3.15 mm (three point one five millimetre) thick, 150 mm (one hundred fifty millimetre) wide including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 170 | Providing and fixing 150mm (One hundred fifty millimetres) diametre on wall face PVC rain water pipes working pressure 6K.g/cm2 (Six kilogram per centimetres square) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 171 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter P.V.C. plain bend of Finolex / Relpipe (Reliance) / Vectus conforming to IS No.-14735-99 including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 172 | Providing and fixing 150mm (One hundred fifty millimetres) diametre Shoe on wall face for PVC rain water pipes working pressure 6.0 K.g/cm2 (Six kilogram per centimetres square) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 173 | Providing and fixing 150mm (One hundred fifty millimetre) diametre PVC clamps ISI marked of Finolex / Relpipe (Reliance)/Vectus approved design to PVC rain water pipe including cost of cutting holes and steel screws, rawal plug and making good the walls etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 174 | Providing and laying 110mm (one Hundred ten millimetre) diametre with working pressure not less than 6.0 Kilogram/cm2 (six point zero kilogram per centimetre square) ISI marked PVC pipe weep holes in brick masonry/stone masonry, plain reinforced concrete, Abutments, Wing walls, Return walls and retaining/breast walls extended through the full width of the structure with slope I(V) : 20(H) (One vertical : Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section 700 and 1200 and as per direction of Engineer-In-Charge including carriage of materials within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 175 | SANITARY FITTINGS AND FIXTURES |
| 176 | Providing and fixing 110mm (One hundred ten millimetre) diametre Finolex/Relpipe (Reliance)/Vectus pressure shall not be less than 6.0 kg/cm2 (six point zero kilogram per centimetre square) PVC Spigot and Socket, waste and ventilating pipe ISI marked including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 177 | Providing and fixing 150mm (One hundred fifty millimetre) diametre Finolex/Relpipe (Reliance)/Vectus pressure shall not be less than 6.0 K.g/cm2 (Six kilogram per centimetres square) PVC Spigot and Socket, waste and ventilating pipe ISI marked including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 178 | Providing and fixing 75mm (Seventy five millimetre) diametre Finolex/Relpipe (Reliance)/Vectus pressure shall not be less than 6.0 kg/cm2 (Six point zero kilogram per centimetre square) PVC Spigot and Socket, waste and ventilating pipe ISI marked including fixing with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 179 | Providing and fixing 150mm (One hundred fifty millimetres) nominal bore/diameter Plain bend ISI marked of Finolex / Relpipe (Reliance)/Vectus including fixing with approved adhesive complete. including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 180 | Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter P.V.C. plain bend of Finolex / Relpipe (Reliance) / Vectus conforming to IS No.-14735-99 including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 181 | Providing and fixing 110mm (One hundred ten millimetre) diametre PVC door bend with oval access door, of Finolex / Relpipe (Reliance) / Vectus insertion rubber washer 3 mm (Three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 182 | Providing and fixing 110x90mm (One hundred into ninety millimetre) nominal size ISI marked P.V.C floor trap of Finolex / Relpipe (Reliance) / Vectus of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 183 | Providing and fixing 110x75mm (One hundred into seventy five millimetre) nominal size ISI marked P.V.C floor trap of Finolex / Relpipe (Reliance) / Vectus of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 184 | Providing and fixing 150mm (One hundred fifty millimetre) nominal bore/diameter ISI marked PVC collar of Finolex / Relpipe (Reliance) / Vectus complete upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 185 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter ISI marked PVC collar of Finolex / Relpipe (Reliance) / Vectus complete upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 186 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter P.V.C clamps of Finolex / Relpipe (Reliance) / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 187 | Providing and fixing 75mm (Seventy five millimetre) nominal bore/diameter P.V.C cowl of Finolex / Relpipe (Reliance) / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 188 | Providing and fixing 110mm (One hundred ten millimetre) nominal bore/diameter P.V.C cowl of Finolex / Relpipe (Reliance) / Vectus ISI marked including finishing with approved design with steel screws and rawal plugs etcetera. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 189 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 6.00 kg (six point zero zero kilogram) and frame to be not less than 2.70 kg (two point seven zero kilogram) as per standard design: 100x100 mm (one hundred into one hundred millimetre) size P type, with common burnt clay F.P.S. (non modular) bricks of class designation 7.5. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 190 | Providing and fixing white vitreous china flat back single half stall urinal as per model no. 60002 of size 39x37.5x59cm (Thirty nine into thirty seven point five into fifty nine centimentre) with white PVC automatic flushing cistern of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details with ittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required with 10 (Ten) litre P.V.C. automatic flushing cistern including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 191 | Providing and fixing 600x300mm (Six hundered into Thre hundered millimetres) nominal size of Division Plate for Urinals Hindware /cera/Jaquar of star white / snow white shade and (Heavy duty make ISI marked No- 8931 & 8934) of approved quality and colour complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 192 | Providing and fixing floor mounted, white vitreous china single piece, EWC 370x665x750mm, (three hundred seventy into six hundred sixty five into seven hundred fifty millimetre) as per model no.CNS-WHT-853S220SPPSM, double traps syphonic of approved brand/make of (Jaguar,Cera), shape, size and pattern as per approval of Engineer-In-Charge, including integrated white vitreous china cistern of capacity 10 (ten) litres with dual flushing system, PP Soft Close Slim Seat Cover, Hinges and set along with 8mm (eight millimetre) diametre C.P pre-installed jet arrangement including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the S trap 200 mm (Two hundred millimetre), complete in all respect including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 193 | Providing and fixing floor mounted, white vitreous china single piece, EWC (410 x 660 x 810)mm, (four hundred into six hundred sixty into Eight hundred ten millimetre) as per model no.\\"CNS-WHT-751P180SPPZ\\", double traps syphonic of approved brand/make of (Jaguar,Cera), shape, size and pattern as per approval of Engineer-In-Charge, including integrated white vitreous china cistern of capacity 10 (ten) litres with dual flushing system, PP Soft Close Slim Seat Cover, Hinges and set along with 8mm (eight millimetre) diametre C.P pre-installed jet arrangement including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the P or S trap, complete in all respect including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 194 | Providing and fixing water closet squatting pan (Indian type W.C. pan )White Vitreous china Orissa pattern W.C. pan no ECS-WHT-451, of size 440 x 575 x 250 mm (Four hundred forty into five hundred seventy five into two hundred fifty millimetre) with integral type foot rests with 100 mm (One hundred millimetre) sand cast Iron P or S trap, 10 litre (Ten litre) low level P.V.C. flushing cistern,of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 195 | Providing and fixing vitreous china pedestal type/wash down floor mounted Matrix water closet (WC) for specially abled person Cat no. \\"DIS-WHT-93753P180UF\\" with size of (390 x 610 x 800)mm (Three hundred ninety into Six hundred ten into Eight hundred millimetre) with supporting arrangement, white colour studio set along with 8mm (eight millimetre) diametre C.P pre-installed jet arrangement, SEAT COVER, Flushing CISTERN 10ltr. (ten litre) capacity and twin flushing valves etcetera complete in all respect, water closet (European Type - WC pan) with integral 'p' or 's' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement, one sand) (with cistern, seat cover and flush fitting) of approved make (Hindware/ Cera/ Jaguar Star white/ Snowhite), complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 196 | Providing and fixing Health faucet ABS with rubbit cleaning system, flexible tube upto 1.25 mtr (one point two five metre) long PVC Flexible tube and ABS wall hook to extended wall mounted type W.C. of quality and make Kingston / Gem / Parko / JAL, ESS / Jaquar / Seiko complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 197 | Providing and fixing 560x415x200mm (Five hundred Sixty into four hundred fifteen into two hundred millimetre), having model no. CNS-WHT-801+CNS-WHT-305 half pedestal type wash basin of Hindware/ Cera/ Jaquar as per details with 15mm (fifteen millimetre) nimonal bore C.P. brass double lever pillar tap mixer, 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 198 | Providing and fixing (485 x 370 x 205)mm (Three hundred eighty five into three hundred seventy millimetre into two hundred five millimetre ), SLS-WHT-6601 under counter type wash basin of Hindware/ Cera/ Jaquar as per details with 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 199 | Providing and fixing (650 x 565 x 155)mm (Six hundred fifty into five hundred sixty five into one hundred ifty five millimetre), as per model no. \\"DIS-WHT-93801\\" matrix wash basin of Hindware/ Cera/ Jaquar as per details with 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 200 | Providing and fixing Stainless Steel kitchen sink with drain board of Diamond/Unik/ Preyag big size 535x455x200 mm (Five hundred thirty five into four hundred fifty five into two hundred millimetres) including C.P. waste with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 201 | Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass bib tap of conforming to IS:8931 of Jaquar / Hindware / Cera / Kerovite and Jal of approved quality (superior or heavy type) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 202 | Providing and fixing 15 mm nominal bore, C.P. brass long body double lever bib cock with Mixer for kitchen sink of approved quality conforming to IS standards and weighing not less than 690 gms (Six hundred ninety grams) Jaquar / Hindware / Cera / Kerovite and Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 203 | Providing and fixing 15mm (Fifteen millimetre) nominal bore double lever, C.P. brass wall mixer for bath with long headed bib cock and L-bend of continental series of Jaquar / Hindon series of Jal / ESS (superior or heavy type) approved quality conforming to IS:8934 including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 204 | Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass pillar tap of conforming to IS:8931 of Jaquar / Hindware / Cera / Kerovite and Jal of approved quality (superior or heavy type) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 205 | Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass 98 mm (ninety eight millimetre) long push cock of approved quality and colour of Jaquar / Hindware / Cera / Kerovite and Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 206 | Providing and fixing 15mm (Fifteen millimeter) diametre C.P. brass stop cock (concealed) of standard design and of approved make of Jaquar / Hindware / Cera / Kerovite and Jal conforming to IS:8931 including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 207 | Providing and fixing 32 mm (Thirty two millimetre) diametre P.V.C. flexible waste pipe of Finolex / Relpipe (Reliance) /Vectus for sink or wash basin including P.V.C. waste fittings complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 208 | Providing and fixing C. P. Brass overhead shower rose with 15mm (Fifteen millimeters) inlet 100mm (one hundred millimetre) with single flow and shower arm of Jaquar / Hindware / Cera / Kerovite and Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 209 | Providing and fixing 25mm (twenty five millimetre) nominal size gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 210 | Providing and fixing 15mm (Fifteen millimeters) diametre C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, Jaquar / Hindware / Cera / Kerovite and Jal including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 211 | Providing and fixing 1216 (15mm (fifteen millimetre) OD pipe Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C (Eighty degree celcius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 metre (One metre) spacing for concealed works, including cutting chases, testing the joint and making good the wall etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 212 | Providing and fixing 1620 (20mm (Twenty millimetre) OD pipe Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 1545 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C (Eighty degree celcius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 metre (One metre) spacing for concealed works, including cutting chases, testing the joint and making good the wall etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 213 | Providing and fixing 15mm (Fifteen millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) of Jindal star/ Jindal Hisar tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 214 | Providing and fixing 20mm (Twenty millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) of Jindal star/ Jindal Hisar tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 215 | Providing and fixing 25mm (Twenty five millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) of Jindal star/ Jindal Hisar tube fitting and clamps including making good the wall, ceiling and floor complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 216 | Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass mounted on 6mm (Six millimeters) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 217 | Providing and fixing 1500x750mm (one thousand five hundred into seven hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) for public toilet complete with 6 mm (Six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 218 | Providing and fixing 600x120x5 mm (Six hundred into one hundred twenty into five millimetre) glass shelf of Jaquar / Hindware / Cera / Kerovite and Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm (Forty millimetre) long screws, rawl plugs etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 219 | Providing and fixing CP brass soap Dish Holder having length of 138mm (one hundred thirty eight millimetre), breadth 102mm (one hundred two millimetre), height of 75mm (seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 (one hundered six) gram complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 220 | Providing and fixing C.P. brass toilet paper Holder including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 221 | Providing and fixing 100mm (One hundred millimetre) diametre chromium plated grating of superior quality for floor, gully or nahani trap complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 222 | Providing and fixing PVC connection pipe ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore with brass unions complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 223 | Providing and fixing 15mm (Fifteen millimeters) nominal bore brass full way valve with wheel of Jaquar / Hindware / Cera / Kerovite and Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 224 | Providing and fixing 20mm (twenty millimeters) nominal bore brass full way valve with wheel of Jaquar / Hindware / Cera / Kerovite and Jal complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 225 | Providing and fixing 110mm (one hundred ten millimetre) diametre P.V.C single equal branch of Finolex / Relpipe (Reliance) / Vectus with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 226 | Providing and fixing 75mm (Seventy five millimetre) diametre P.V.C single equal branch of Finolex / Relpipe (Reliance) / Vectus with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 227 | Providing and fixing 150mm (one hundred fifty millimetre) diametre P.V.C single equal branch of Finolex / Relpipe (Reliance) / Vectus with insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 228 | Providing and fixing 110mm (One hundred ten millimetre) diametre P.V.C double equal branch of Finolex / Relpipe (Reliance) / Vectus with insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 229 | Providing and fixing 150mm (one hundred fifty millimetre) diametre P.V.C double equal branch of Finolex / Relpipe (Reliance) / Vectus with insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 230 | Providing and fixing 110mm (One hundred ten millimetre) diametre P.V.C plain double equal branch with oval access door, of Finolex / Relpipe (Reliance) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 231 | Providing and fixing 150mm (one hundred fifty millimetre) diametre P.V.C plain double equal branch with oval access door, of Finolex / Relpipe (Reliance) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 232 | Providing and fixing CP brass towel rail as per model no. FS007103 of Jaquar / Hindware / Cera / Kerovite and Jal with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm (six hundred millimetre) long towel rail with total length of 645 mm (six hundred forty five millimetre), width 78 mm (seventy eight millimetre) and effective height of 88 mm (eighty eight millimetre), weighing not less than 190 gms (one hundred ninety gram) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 233 | Providing and Fixing Charomium plated 40mm (forty millimetres) diametre steel pipe for grab bars at 78cm (seventy eight centimetres) height M.S. plate as per details at the position of the seat and Wash Basin complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 234 | Providing and fixing CP brass towel ring of Jaquar / Hindware / Cera / Kerovite and Jal trapezoidal shape 215 mm (two hundred fifteen millimetre) long, 200 mm (two hundred millimetre) wide with minimum distances of 37 mm (thirty seven millimetre) from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 (eighty eight) gms including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 235 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of Finolex / Vectus/ Astral having tripple layer of IS No: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including fittings but excluding the base support for tank complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 236 | Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40mm (Twenty milimetres to Forty milimetres) nominal bore by providing and fixing tees including cutting and threading the pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 237 | Providing and laying cement concrete 1:4:8 (One Cement isto four Sand isto eight graded stone aggregate 40mm (Forty millimetre) nominal size ) all round for PVC pipes of 150mm (One hundred fifty millimetre) internal diameters, for bedding , necessary form work and curing complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 238 | Providing and laying cement concrete 1:3:6 (One Cement isto three Sand isto six graded stone aggregate 40mm (Forty millimetre) nominal size ) all round for PVC. pipes of 150mm (One hundred fifty millimetre) internal diameters, for hauching, necessary form work and curing complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 239 | Constructing brick masonry manhole in cement mortar 1:4 (One cement isto Four coarse sand ) with R.C.C. top slab with 1:2:4 mix (One cement isto two coarse sand (zone- III) isto four graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:4:8 mix (One cement isto Four coarse sand (zone- III) isto Eight graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (One cement isto Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two coarse sand isto Four graded stone aggregate 20 mm (Twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cm (Ninety into eighty centimetre) and 45cm (Forty five centimetre) deep including C.I. cover with frame (light duty) 455x610mm (Four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 Per Kilogram (Thirty eight kilograms) (weight of cover 23 Per Kilogram (Twenty three kilograms) and weight of frame 15 Per Kilogram (Fifteen kilograms) With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 240 | Constructing brick masonry manhole in cement mortar 1:4 (One cement isto Four coarse sand ) with R.C.C. top slab with :2:4 mix (One cement isto two coarse sand (zone- III) isto four graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:4:8 mix (One cement isto Four coarse sand (zone- III) isto Eight graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (One cement isto Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two coarse sand isto four graded stone aggregate 20 mm (Twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90cm (One hundred twenty into ninety centimetre) and 90cm (Ninety centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 Per Kilogram (Thirty eight kilograms) (weight of cover 23 Per Kilogram (Twenty three kilograms) and weight of frame 15 Per Kilogram Fifteen kilograms) With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 241 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (One cement isto Four coarse sand) C.I. cover with frame (light duty) 455x610mm (Four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover with frame to be not less than 38 Per Kilogram (Thirty eight kilograms) (weight of cover 23 Per Kilogram (Twenty three kilograms) and weight of frame 15 Per Kilogram (Fifteen kilograms) ), R.C.C. top slab with 1:1.5:3 mix (One cement isto One and Half Fine sand isto Three graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:5:10 (One cement isto Five fine sand isto ten graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelev millemetre) thick with cement mortar 1:3 (One cement isto Three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete as per standard design Inside dimensions 455x610 mm (Four hundred fifty five into six hundred ten millmetre) and 45 cm (Forty five centimetre) deep for single pipe line complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 242 | Excavating trenches of required width for pipes, cables, etcetera including excavation for sockets, and dressing of sides, ramming of bottoms, upto any depth including getting out the excavated soil, then returning the soil as required, in layers not exceeding 20 cm (Twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etcetera and disposing of surplus materials/excavated soil as per specification, approved drawing, design, specification and as per the entire satisfaction of Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. . |
| 243 | Providing and fixing 455x610mm (Four hundred fifty five into six hundred ten millimetre) light duty rectangular cast iron manhole with frame cover weight 23Per Kilogram (Twenty three kilograms) single seal pattern complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 244 | Supplying and fixing C.I. cover 300x300 mm (three hundred into thhree hundred millimetre) without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 Per Kilogram (four point five kilogram) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 245 | Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:3 (One cement isto three sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 246 | Providing and fixing S.F.R.C heavy duty manhole cover Circular shape 560mm (five hundred sixty millimetre) diametre precast R.C.C. manhole cover with frame - H.D. - 20 (twenty) within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding of GST. |
| 247 | Provision for water lifting pump 1.00 HP (One point zero zero horse power) of Crompton/Kirloskar including all necessary fittings complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. |
| 248 | Providing and fixing 25 mm (twenty five millimetre) diametre fire hydrent inculuding all necessary fiting compelete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding of GST. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender