Tender For Providing Iei , Eei & Air Conditioner Of The Proposed Installation Of E-Corner And Atm Unit In The Court Premises, Sri Vijaya Puram. Sw: Providing Iei & Eei.
Tender Value
4.91 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
1 days left
EMD
9827
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Iei , Eei & Air Conditioner Of The Proposed Installation Of E-Corner And Atm Unit In The Court Premises, Sri Vijaya Puram. Sw: Providing Iei & Eei.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, Installation, Testing & Commissioning of 15W LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5°C to 40°C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI ≥80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 2 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Make: Philips, Dura Slim Model: Dura Slim LED Downlight or approved equivalent, complete in all respects as per specifications and directions of the Engineer-in-Charge. |
| 2 | Supply of exhaust fan of sweep 150 mm, with hidden blades and screwless installation design for low noise performance, complete with motor, frame and all standard accessories. Make: Usha, Model: Crisp Air Premia AF or equivalent. |
| 3 | Supplying, installation, testing and commissioning of On-Line UPS of capacity 6 kVA / 6 kW, input/output 230 V AC, single phase, complete with hard wire 3-wire (1P+N+E) outlet, internal/external battery bank with suitable wall mounted rack, input-output connections, earthing, and all necessary accessories required for proper operation, complete as required. Make: APC, Model: SRV6KUXI-IN or equivalent. |
| 4 | Supplying, installation, testing and commissioning of 12 V, 26 Ah sealed maintenance free (SMF) battery complete with suitable battery interconnecting cables, lugs, nuts & bolts, and necessary connections for proper operation with UPS system, including testing and commissioning complete as required. Make: Exide or equivalent. |
| 5 | Fabrication, supplying and fixing of steel rack of suitable size made out of MS angle and flat, duly welded, capable of accommodating 16 nos. of 12V, 75Ah batteries, including surface preparation and painting with two or more coats of synthetic enamel paint of approved shade over a coat of red oxide metal primer, all as directed by the Engineer-in-Charge, complete job as required. |
| 6 | Supplying, Installation, testing and commissioning of safe earthing electro type-19, 48 mm dia, length 2 mtrs and inner space to be filled with crystaline conductive mixture including filling up with electrodite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required. Make : ASHLOK or its equivalent. |
| 7 | Supplying, Installation, Testing & Commissioning of HRC Fuse Unit, panel mounting cubicle type, 4 pole, 63 Amp, 415V, in sheet steel enclosure, complete with 04 Nos. HRC fuse links and 04 Nos. additional spare fuse links (total 08 Nos.), including end termination, clamping arrangement on wall, necessary wiring, connections, mounting hardware and accessories etc. as required. Make: Havells, Model: IHKDFW4063 or equivalent. |
| 8 | Supplying, installation, testing and commissioning of 3 phase meter box made of FRP/ABS material of size 345 × 480 × 135 mm, suitable for housing 3 phase energy meter, complete with mounting arrangement, cover with locking provision and all necessary fittings and accessories, including fixing on wall with suitable hardware as required. Make: Syntex, Model: GSMB-3750 or equivalent. |
| 9 | Supplying of following sizes XLPE insulated and PVC sheathed heavy duty armoured aluminium conductor UG cable of 1.1 KV grade conforming to IS: 7098 (Part I) 1988 as applicable. Make : RR Kable, Havells, Polycab or equivalent. |
| 10 | 4 core, 25 sqmm |
| 11 | Laying of one number XLPE insulated armoured power cable of 1.1 KV grade of following size in the existing DWC/HDPE/GI Pipe as required. |
| 12 | 4 core, 25 sqmm |
| 13 | Supplying and laying of following size HDPE pipe ISI marked along with all accessories like socket,tee, bend, couplers etc. conforming to IS 16203 (Part 24), 2018 (old IS 14930, Part 2,2001) completes with fitting and cutting, jointing etc. direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. |
| 14 | 63mm, PE-100 grdae HDPE pipe with min PN16 |
| 15 | Supplying and laying of following size HDPE pipe, ISI marked along with all accessories like socket, tee, bend, couplers etc. conforming to IS 16203 ( Part 24 ), 2018 (old IS 14930, Part 2,2001) completes with fitting and cutting, jointing etc. on surface/wall including clamping etc as required. |
| 16 | 63mm, PE-100 grdae HDPE pipe with min PN16 |
| 17 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the open surface as required. |
| 18 | 4 core, 25 sqmm |
| 19 | Demolishing cement concrete/ bituminous road manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 20 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete the trench , but excluding DWC /GI Pipe dia. |
| 21 | Supplying, Installation, Testing and Commissioning of 300 mm sweep wall mounting fan complete with mounting bracket, connection to existing wiring, testing and commissioning etc. as required. Make: Bajaj, Model: Maxx Air Dew or equivalent. |
| 22 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 23 | Group C |
| 24 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 25 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 26 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 27 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 28 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. |
| 29 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 30 | Upto 450 mm sweep |
| 31 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 32 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. |
| 33 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 34 | 6 way , Double door |
| 35 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 36 | 4 way (4 + 12), Double door |
| 37 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 38 | Single pole |
| 39 | Double pole |
| 40 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 41 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 42 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 43 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 44 | Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender