Tender For Provision Of R For Loading And Unloading Newly Received Vehicle At Cod Dehu Road, Hardstanding Infront Of Fire Station No 1 For Parking Of Truck Fire Fighting (Tff) In No 2 Amn Area At 29 Field Amn Depot Dehu Road And Iron Windows Grill In
Tender Overview
Project Description
Tender for Provision Of R For Loading And Unloading Newly Received Vehicle At Cod Dehu Road, Hardstanding Infront Of Fire Station No 1 For Parking Of Truck Fire Fighting (Tff) In No 2 Amn Area At 29 Field Amn Depot Dehu Road And Iron Windows Grill In All The Windows Of Headquarrters Complex Building And The Me Complex Building At 29 Field Amn Depot, Dehu Road
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n exc 15 cm deep and getting out hard and dense soil complete all as specified and as directed by engr-in-charge. |
| 2 | Excavation in trenches n exc. 1.5m wide and not exc 1.5m in depth and getting out in hard / dense soil for foundation etc. complete all as specified and as directed by engr-in-charge. |
| 3 | M&L Cement concrete 1:4:8 (40mm graded stone aggregate) as in foundationn, filling and mass concrete, complete all as specified and as directed by engr-in-charge. |
| 4 | M&L for PCC block masonary 1:3:6 type C1 with solid block exc. 6 m. mean radius, built in and setting in mortar CM 1:6 ,complete all as specified and as directed by engr-in-charge. |
| 5 | M&L for 15 mm thick rendering in cement mortar 1:4 on concrete block masonry finishing even and smooth without using extra cement .complete all as specified and as directed by engr-in-charge. |
| 6 | M&L for hardcore of guge n exc .63 mm, deposited, spread and levelled in layers n exc. 15 cm thick watered and rammed to a true surface complete all as specified and as directed by engr-in-charge. |
| 7 | Returning filling in including spreading,leveling ,watering and well ramming in layer complete all as specified and directed by Engr-in-charge. |
| 8 | M & L for providing RCC (Design mix M-25 using 20 mm graded stone aggregate) as beams , cantilevers, bressummers , lintel over 1.5 mtr span complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item) |
| 9 | M & L for providing RCC (Design mix M-25 using 20 mm graded stone aggregate) as slabs supported on walls, beams and column in floors, roofs, landing, balconies, canopies, deck slabs and in shalves and the like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item) |
| 10 | M&L formwork to soffits of suspended slabs such as roof slab , floor slab, landing and similar work, not exceeding 200 mm thick (Horizontal or sloping) etc fair finished surface complete all as specified and as directed. |
| 11 | M&L formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, butteresses etc; verticle or to batter complete all as specified and as directed. |
| 12 | M&L for TMT bar 10mm dia and over cut to length bend to shape required and binding with mild steel wire annealed not less than 0.9mm dia. complete all as specified and as directed by engr-in-charge. |
| 13 | Material and labour 100 mm thick plain cement concrete (1:4:8) type C-2 (using 40 mm graded stone aggregate) as in the sub base of floor complete all as specified. |
| 14 | M & L for Cement concrete work in pavement / hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less completed all as specified |
| 15 | Excavation over areas n.exc. 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed. |
| 16 | Rolling and consolidating formation surfaces with power roller exc. 8 tonne but n. exc. 12 tonne including watering, consolidating to the required level, gradient, camber etc. in cutting, filling in hollows and depressions in the process complete all as specified and as directed. |
| 17 | M&L for Moorum/red bajri filling in floor pavings laid in layers not exc 15 cm ( 150mm) thick, spred, levelled and rammed including rolled and consolidated to required gradient and camber incl watering with power roller complete all as specified and as directed by Engineer-In-Charge. |
| 18 | Removing excavated material (soil) n.exc. 50 m and depositing at a level n.exc. 1.5 m above the starting point complete all as specified and directed. |
| 19 | M & L for Soling (or sub base) 200 mm thick with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and cambercomplete all as specified and as directed by Engineer-In-Charge. |
| 20 | M&L for Cement concrete 1:2:4 Type B2 150 mm thick (40 mm graded stone aggregate as in pavings complete all as specified and directed by Engineer-in-Charge |
| 21 | M&L for polythene film black 150 micron thick laid on sub base surface complete all and as per directed |
| 22 | M&L for forming 12mm thick Expansion joints thickness of slab 250 mm filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' complete all and as directed |
| 23 | M &L for forming Contraction (Dummy) joints 30mm deep x 10mm wide, filled with sealing compound complete all and as directed |
| 24 | S & F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar fixing in existing window with suitable screw/ welding work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge |
| 25 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, in cement mortar 1:6, complete all as specified |
| 26 | M & L for Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of primer after preparation of surfaces complete all as specified and as directed. |
| 27 | M & L for two coats of synthetic enamel paint to new steel surfaces over a coat of red oxide primer surfaces of any description exc 10 cm in witdth or girth complete all as specified and directed by Engineer-in-Charge |
| 28 | M & L for Preparation of old plastered or unplastered surfaces of walls and applying one coats of distemper oil emulsion etc, complete all as specified and as directed by Engr-in-Charge |
| 29 | M&L for preparation of surfaces of new plaster surface of wall and applying two coat of cement base paint over priming surface complete all as specified and directed. |
| 30 | M&L for preparation of surfaces of old plaster surface of wall and applying two coat of cement base paint over priming surface complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender