Tender For Major Repair Of School Building At Zpps Chapadgaon Tal-Karjat Dist- Ahilyanagarr
Tender Value
6.71 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
8 days left
EMD
6714
Bank guarantee accepted
Document Fee
236
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmednagar → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Major Repair Of School Building At Zpps Chapadgaon Tal-Karjat Dist- Ahilyanagarr
BOQ
| Sl. No. | Item Description |
| 1 | Removing A.C. or G.I. sheets from roof or walling and stacking them properly with all leads and lifts complete.SSR Item No.46.06 BD.W.8-8 Page No. 370 |
| 2 | Dismentaling wooden king post truss including removing screws, bolts, and stacking the removed material as directed by engineer incharge.SSR Item No. : 46.04 BD.W.8-5B Page No. 303 |
| 3 | Removing purlins from roof including stacking as directed with all leads , lifts etc. complete SSR Item NO.46.35 BDW 8 ,Page NO.376 |
| 4 | Dismantling Stone masonry in lime or cement and stacking the materials as directed with all leads lifts, complete.As directed by Engineer incharge.SSR Item no 46.11BDW 8 Page no. 370 |
| 5 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.SSR Item No.46.15 BDW 8,Page No.303 |
| 6 | Removing Shahabad or Tandur stones from floor without bed concrete including stacking the materials as directed with all leads, lifts, complete.SSR Item No. : 46.19 BD.W.-8 Page No. 371 |
| 7 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR Item No.27.05 BDG 5 Page No.247 |
| 8 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. SSR Item No.32.11 BDL 7 Paeg No.262 |
| 9 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. SSR Item No.35.13 BDO 8 Page No.281 |
| 10 | Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. SSR Item No.33.42 BDM 12 Page No.267 |
| 11 | Providing and fixing 50 mm x 50 mm Mild Steel square pipe framed steel windows of various sizes as per details with welded square bars 12 mm at 10 cm center to center without hot dip zinc coating without / with ventilator including fabrication, glazing with plain / obscured glass panes 5 mm thick of approved type and quality, all fixtures and fastenings and finishing with one coat of primer complete.As directed by Engineer in charge. SSR Item No.39.66 BDT Page No.328 |
| 12 | Providing and fixing M.S. grill door 24 Kilogram/ One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc As directed by Engineer in charge. SSR Item No.39.31 BDT page No.309 |
| 13 | Providing and fabricating structural steel work in tubular/rectangular/hollow steel structure of standard size as per detailed designs and drawing including fixing in position without connecting plates, braces etc. and one coat of anticorrosive paint and over it two coats of oil paintings of approved quality and shade complete. SSR Item No. : 23.04 BD.C.8 Page No. 214 |
| 14 | Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.).e SSR Item NO.38.05 BDR 5 Page NO.291 |
| 15 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) As directed by Engineer in charge. SSR Item No.38.34 BDR Page No.296 |
| 16 | Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand)SSR Item No.33.53 BDM Page No.274 |
| 17 | Testing Charges Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender