Tender For Regarding Electrical Repairing And Retrofitting Works In Health Centers Under The Hinduhrudaysamrat Balasaheb Thackeray Nagari Lokkalyan Abhiyan.
Tender Value
51.34 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
0 days left
EMD
51344
Bank guarantee accepted
Document Fee
1160
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aurangabad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Regarding Electrical Repairing And Retrofitting Works In Health Centers Under The Hinduhrudaysamrat Balasaheb Thackeray Nagari Lokkalyan Abhiyan.
BOQ
| Sl. No. | Item Description |
| 1 | Point wiring for light/fan/bell in 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and required accessories as per specification no. WG-PW/SW DSR No. 1-7-3 |
| 2 | Point wiring for light/bell concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW DSR No.1-7-5 |
| 3 | Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SW DSR NO. 1-7-18 |
| 4 | Wiring for plug on board with switch socket surface/concealed type, copperwiring and earthing and with modular accessories as per specification no. WG- PW/CW DSR No. 1-7-25 |
| 5 | Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. DSR No. 1-6-1 |
| 6 | Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete. DSR No. 1-6-2 |
| 7 | Supplying and erecting modular type 3 pin 6A multi socketwith safety shutter on provided plate and box with wiring connections complete. DSR NO. 1-6-10 |
| 8 | Supplying and erecting modular type3pin6/16Amulti socket with safety shutter on provided plate and box with wiring connections complete. DSR NO. 1-6-11 |
| 9 | Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW DSR No. 1-3-1 |
| 10 | Supplying and erecting PVC trunking (PVCcasing-n-capping) of size 32mm with accessories on wall/ceiling as per specification no. WG-MA/CON. DSR No. 1-2-8 |
| 11 | Supplying and erecting mains with WP 2 x 4 sq. mm. 1.1 kV grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire no. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. DSR NO. 1-4-2 |
| 12 | Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW DSR No. 1-3-2 |
| 13 | Supplying and erecting CRCA powder coated mirror light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs at L70B50, IP 20 rated including driver with end caps on provided PVC Block / wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED.DSR No. 2-1-17 |
| 14 | Supplying and erecting modular type (two module) electronic dimmer 600/650W on provided plate and box with wiring connections complet DSR No. 1-6-21 |
| 15 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module complete. DSR No. 1-6-28 |
| 16 | Supplying and erecting PVC Surfacemodular switch box with double mounting plate for 16/18 module complete. DSR No. 1-6-33 |
| 17 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module complete. DSR No. 1-6-30 |
| 18 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module complete. DSR No. 1-6-32 |
| 19 | Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. FG-FN/CF. DSR No. 2-9-2 |
| 20 | Supplying and erecting cabin fan of A.C. 230 V. 50 cycles 400 mm. sweep complete with necessary brackets for fixing cabin fans, wire etc. DSR No. 2-9-12 |
| 21 | Supplying and erecting street light Wall bracket made from 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as perspecification no. FG-BKT/WB. DSR No. 2-6-4 |
| 22 | Supplying and erecting integrated LED street light fitting 40 to 50W IP65 &IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W,CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V,inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 includingdriver complete with minimum 2 Years warranty as per specification No. FG-ODF/SL. DSR No. 2-3-4 |
| 23 | Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FGODF/ FL. DSR NO.2-3-15 |
| 24 | Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base as per specification no. FG-LP DSR No. 2-7-5 |
| 25 | Supplying and erecting ceiling rose/ batten holder/ slanting holder/ hanging cord switch/ hanging bell push/ pendant holder bakelite base 6A erectedon filled polypropylene board or polished double wooden block/ PVC junction box. DSR No. 1-5-5 |
| 26 | Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuitbreaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB DSR No. 5-3-2 |
| 27 | Supplying, erecting & marking DP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB DSR No. 5-3-7 |
| 28 | Supplying, erecting & marking FP MCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCBDSR NO5-3-12 |
| 29 | Supplying, erecting and marking double pole isolator only switch version of miniaturecircuit breaker of 40A with required wiring connections and lugs etc. in provide distribution board DSR No. 5-3-14 |
| 30 | Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board. DSR No. 5-3-18 |
| 31 | Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia.G.l. Rodcomplete with all materials as per specification no. EA-EP DSR No. 9-1-4 |
| 32 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-MCBDB.DSR NO5-4-1 |
| 33 | Supplying, installing and testing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all accessories of copper materials & recording the results as per specification no. EA-EP DSR NO. 9-1-2 |
| 34 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB DSR No. 5-4-9 |
| 35 | Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF DSR No. 2-9-14 |
| 36 | Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan. DSR NO 2-10-2 |
| 37 | Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. DSR NO. 2-10-6 |
| 38 | Supplying and erecting modular type blanking plate one module ,on provided plate & box. DSR NO.1-6-24 |
| 39 | Supplying and erecting 25mm dia. corrugated flexible polypropylene conduit DSR NO 1-2-2 |
| 40 | Supplying and erecting HMSPVC conduit 25mm dia.with PVC accessorieson wall /ceiling as per specification no. WG-MA/CON. DSR NO. 1-2-4 |
| 41 | Supplying 230/250 Volts, 50Hz, evaporative air cooler (desert cooler) having normal cooling capacity of 50 cu.m per minute, with 12\\" exhaust, min 40 to 55 litres water capacity tank with galvanised steel sheet with Grade 350 minimum, leak or drip free, front grill shall be made of non-corrosive material, circular opening shall be more than fan sweep but not exceeding more than 25mm, Filter pads shall be made of wood wool or any other substitute placed in non corrosive wire mesh and tightened at places with side panels, noise level should not be more than 65 dBA at 1 m distance, 3 core copper cable minimum 2 m length & metal casing of the electrical components, metal frame or chassis of cooler cabinet and all exposed metallic parts, shall be provided with proper earthing complete as per specification No. AP-ACR/DAC DSRNO. 3-4-1 |
| 42 | Supplying and erecting mains with WP 4 x 4 sq. mm. 1.1kV. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire no. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. DSR NO.1-4-6 |
| 43 | Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mA Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 Hrs with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20 % having useful life of minimum 25000 Hrs with over heat protection with minimum 2 years as per specification No. FG-IDF/LED. DSR NO.2-1-22 |
| 44 | Supplying, erecting, testing and commissioning of minimum three & above star rated centrifugal water pump (monoblock), 230 V, single phase, 50 Hz, A.C. supply of 0.375 kW/0.5 HP with discharge 36/9 lpm for head of 6/21 m & 25 mm suction/25 mm delivery pipe on provided CC foundation as per specification no. WP-CGP. DSR NO.12-1-1 |
| 45 | Supplying, installing, testing and commissioning of 2500 VA Digital pure sine wave inverter based on Insulated Gate Bipolar Transistor (IGBT) technology single phase 230V,50 Hz complete as per specification no. AP-INV (Without batteries) DSR NO.3-6-4 |
| 46 | Supplying and erecting 12 V/200Ah Tubular battery with battery terminal wire, duly charged complete with 36 months warranty complete DSR NO.3-8-6 |
| 47 | Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/ SAC DSR NO. 3-2-9 |
| 48 | Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/ SAC DSR NO 3-2-11 |
| 49 | Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 12mm complete as per specification no. AP/AC-CP DSR NO. 3-2-26 |
| 50 | Supplying & erecting HMS PVC conduit 20mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. DSR NO. 1-1-7 |
| 51 | Supplying, erecting, testing & commisioning metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc.including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and painted with one coat of red lead paint and 2 coats of enamel paint or powder coating complete as per specification no. CP/SH/CR DSR NO.6-1-1 |
| 52 | DG Set (25kva, 30kva etc. ) Engine oil ( As per Approved Market Rate) E-File No.3272036 |
| 53 | Fuel filter ( As per Approved Market Rate) E-File No.3272036 |
| 54 | Oil filter ( As per Approved Market Rate) E-File No.3272036 |
| 55 | Air filter ( As per Approved Market Rate) E-File No.3272036 |
| 56 | Panel Indicator Light ( As per Approved Market Rate) E-File No.3272036 |
| 57 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL DSR NO 7-1-16 |
| 58 | Supplying and erecting PVC Surface modular switch box with double mounting & front plate for 8 module complete duly connected.DSR NO DSR NO 1-6-31 |
| 59 | Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block / sunmica block of suitable size.DSR NO 2-2-3 |
| 60 | Supplying and erecting 12 V/65Ah SMF battery with battery terminal wire, dulycharged complete with 24 months warranty complete DSR NO3-8-11 |
| 61 | Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no EA-EP.DSR NO9-2-3 |
| 62 | Providing & erecting floor/wall mounting, MCCB panel board, with door, suitable for 4 pole incoming 400A, 8 ways 4 pole outgoing, up to 100A MCCBs on iron frame, as per specification no. SW-MCCBPB. (Excluding MCCBs) DSR No. 5-7-9 |
| 63 | Providing & erecting 3 Pole MCCB, 415V, up to 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixedmagnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, noline-load bias in provided enclosure/panel as per specification no. SW-MCCB DSR NO. 5-5-1 Note:- 1)For use of 4 pole MCCBs in place of 3 pole MCCBs add 20% in rate of 3 poleMCCB. |
| 64 | Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB DSR NO. 5-5-3 |
| 65 | Supplying and erecting terminal spreaders suitable for 4 pole, upto 250A MCCB (Set of 8) DSR NO. 5-11-7 |
| 66 | Dismantling the existing switchgears, DB, and bus bar of any size complete with/without board or angle iron frame DSR NO. 5-12-1 |
| 67 | Making the site clear of dismantled DB and switchgears by refilling the holes with cement mortar & finishing in an approved manner. DSR NO. 5-12-2 |
| 68 | Supplying, erecting, testing & commisioning bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A having 15mm (width) X 3 mm (thickness), with 99.9 % aluminium purity as per E91E grade & current density 0.8 A per sq mm compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC insulators and accessories of suitable rating and two nos of separateearthing terminals complete as per specification no. CP-BB DSR NO.6-2-1 |
| 69 | Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panelcomplete with calibration certificate from manufacturer. DSR NO. 6-5-7 |
| 70 | Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. DSR NO. 6-5-8 |
| 71 | Supplying & erecting porcelain/epoxy bus bar support complete erected in provided M.S. box for 100A DSR NO.5-10-22 |
| 72 | Supplying and erecting SS enclosure of 1.6mm thick with detachable gland plate suitable for upto 100A MCCB. DSR NO. 5-11-17 |
| 73 | Supplying, erecting, testing and commissioning self contained water cooler 230/250 V 50 cycles nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body as per specification no. AP-WCR/WC DSR NO. 3-3-9 |
| 74 | Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). DSR NO. 16-3-7 |
| 75 | Supplying pedestal type air circulator 450 mm. sweep oscillating type suitable to work on 230 Volts 50 cycles 1440 RPM without speed regulator, metallic blades, overheat protection unit, totally enclosed, flame proof motor with additional 3 core wire, 5 metre length and hand shield type 3 pin 5A. plug top complete with moisture proof treatment and ‘E’ class insulation. DSR No. 2-9-8 |
| 76 | Supplying and erecting ceiling rose/ batten holder/ slanting holder/ hanging cord switch/ hanging bell push/ pendant holder bakelite base 6A erected on filled polypropylene board or polished double wooden block/ PVC junction box. DSR No.1-5-5 |
| 77 | Supplying & erecting FRP box of size 250mm x 200mm x 100 mm, 2.7 mmthick complete on pole/wall as per specification No. CB-SB DSR NO.7-8-9 |
| 78 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection provided on iron/GI frame as per specification no. SW-MCBDB DSR No.5-4-11 |
| 79 | Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/ SAC DSR No.3-2-12 |
| 80 | Supplying & erecting seamless outside & inside, smooth, dry and cleancopper pipe with ROHS compliant suitable for refrigerant having 22SWGthickness and inner dia/size 16mm complete as per specification no. AP/AC-CP DSR No.3-2-27 |
| 81 | Supplying and erecting 25 mm dia., 2.45 mm min. thickness polyethylenecomposite pipe, conforming to IS 15450 :2004 duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement for Solar Water Heater System as per specification No. ESDHWP/PCP.DSR No.4-2-11 |
| 82 | Supplying and erecting luminous / modular type call bell indicator withplastic body, heavy duty coil and indicator lamp working on 230V A.C. supply with resetting arrangement complete erected on double wooden / sunmica board. DSR No.2-2-4 |
| 83 | Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50 cycles nominal cooling capacity of 40 litres per hour and storage capacity 80 litres with partially stainless steel body As per specification No. APWCR/ WC DSR No.3-3-8 |
| 84 | Providing & erecting 3 Pole MCCB, 415V, up to 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB DSR NO.5-5-1 (For 4 pole MCCB 415V, up to 100A,) |
| 85 | Supplying, erecting & marking TP MCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB DSR NO.5-3-10 |
| 86 | Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB DSR NO.5-3-2 |
| 87 | Engine oil |
| 88 | Fuel filter |
| 89 | Oil filter |
| 90 | Air filter |
| 91 | 50 AMP 4 Pole contactor |
| 92 | Panel indicator light |
| 93 | LT Distributiuon panel 250AMP Shifting |
| 94 | Supplying and erecting storage type water heater 25 litres capacity having standing loss < 0.465kWh/24hour/45°C, high impact resistance engineering plastic body with anti corrosive high grade steel inner tank, heating element having hard water & corrosion protection, with minimum 3 safety protections (i.e. thermostat & thermal function valve) complete with 3 core PVC flexible wire leads complete & total pressure 8 bar withstanding capacity duly tested and marking sr. no. and date of erection complete as per specification no. AP-WH/STWH DSR NO. 3-1-2 |
| 95 | Third party Inspection charges (1%) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender