Tender For Development Of Mashiche Mal Ground With All Sports Facilities In Ward No. 05 At Nanus Vado Valpoi Sh-Miscellaneous Work (Phase Iv)
Tender Value
1 Crore
Estimated cost
Bid Submission
18 Sep 2026
3 days left
EMD
2.01 Lakhs
Bank guarantee accepted
Document Fee
8000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Mashiche Mal Ground With All Sports Facilities In Ward No. 05 At Nanus Vado Valpoi Sh-Miscellaneous Work (Phase Iv)
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation over areas/Trenches by mechanical/mannual means at all depths( till 3 mt) in all types of strata’s comprising of the materials such as soil, silt, sand, clay, gravel moorum of all varieties shringles, pebbles, all types of conglomerates laterite rocks, ordinary rocks, disintegrated rocks, fissured / shattered rocks decomposed rocks or weathered rocks and all such other materials as described under appendix “A” to these specifications either in full or in parts as the case may be adopting any method / methods as may be convenient or permitted inclusive of blasting chiseling wedging etc. in all conditions such as dry, moist foul submerged saturated etc. and as directed by the Engineer-in-charge, etc. all complete including dressing of sides, ramming of bottom including all leads and lifts including getting out the excavated soil as directed including pumping and bailing out water, barricading danger lighting guarding as directed by the departmental officers. |
| 2 | Refilling the plinth , flooring, foundations etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directedby Engineer in Charge. |
| 3 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 4 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : |
| 5 | Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineerin- charge. All works upto floor V level: M-30 grade of concrete |
| 6 | Providing TMT steel reinforcement (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 7 | Centering and shuttering including struttings, propping etc. and removal of formwork for : (a) Foundations, footings, bases for columns and mass concrete. |
| 8 | Centering and shuttering including struttings, propping etc. and removal of formwork for : (c) Columns, Pillars, piers,abutments, posts and strut, square, rectangular, polygon in plan. etc. |
| 9 | 20mm cement plaster 1: 3 (1 cement : 3 coarse sand) |
| 10 | Colour glazed tiles 6 mm thick in skirtings risers of steps, dado laid on a bed of 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand ) jointed with white cement slurry including Fixing glazed / ceramic / vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (water based) conforming to IS:15477, using 5 kg. adhesive per sq.m of tile area, in average 3 mm thickness |
| 11 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 12 | Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade |
| 13 | Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. c) 80 mm thick in all colours except grey (M40 grade) |
| 14 | Supplying, installing, testing and commissioning optical typesmoke detector complete on box as per specification no. FFFAS/ SD |
| 15 | Supplying, installing, testing and commissioning manual call point (Pill box) with break glass push button in metal enclosure complete as per specification no. FF-FAAS/MCP. |
| 16 | Supplying, installing, testing and commissioning hooters with CRCA enclosure complete as per specification no. FF-FAAS/HTR |
| 17 | Supplying, installing, testing and commissioning remote response indicators complete as per specification no. FF-FAAS/RRI |
| 18 | Supplying, installing, testing and commissioning four wireconventionally single ended reflected type beam smoke detector with 8 “ receiver . The range of smoke detector is max 164 feet. |
| 19 | Supplying, installing, testing and commissioning of 6 ZonesMicroprocessor based conventional fire alarm control panel(FACP) with standard accessories complete as per specification no. FF-FAAS/FACP (Note:- 1. Increase overall rate by 25 % for additional zone as per requirement.) |
| 20 | Supplying, installing, testing and commissioning FR, XLPEarmoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CBLT/ CU (NOTE:2. For item no 13-8-8 to 13-8-11 increase overall rate by 7.5% for FRLS.) |
| 21 | Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings as per specification no. FF-PP |
| 22 | Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings as per specification no. FF-PP |
| 23 | Supplying and installing G.I.pipe under ground of ‘C’ class ERW with Bitumen Paint & 4mm thick Wrapping as per IS 10221 of size 75/80 mm dia with necessary fittings as per specification No. FF-PP |
| 24 | Supplying and installing G.I.pipe under ground of ‘C’ class ERW with Bitumen Paint & 4mm thick Wrapping as per IS 10221 of size 150 mm dia with necessary fittings as per specification no. FF-PP |
| 25 | Supplying and installing 100 mm dia end line strainer for +ve suction as per specification No. FF-VL/ELS |
| 26 | Supplying and installing 150 mm dia end line strainer for +ve suction as per specification No. FF-VL/ELS |
| 27 | Supplying & Installing cast iron double flange butterfly valve of size 100 mm dia. as per specification No. FF-VL/BFV |
| 28 | Supplying and erecting cast iron double flange NRV of size 100 mm dia complete as per specification no. FF-VL/NRV |
| 29 | Supplying and erecting gun metal single outlet hydrant valvefitted with necessary accessories complete as per specification no. FF-VL/HV |
| 30 | Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m high pressure polypropylene (Polyhose) long fitted with necessary accessories complete as per specification No. FF-FFA/HV |
| 31 | Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL |
| 32 | Supplying & erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FF-FFA/NZ |
| 33 | Supplying and erecting fire brigade header of 150 mm dia, forsupplying water in fire tank complete as per specification no. FFFA/ FBC |
| 34 | Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV |
| 35 | Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FFFFA/ PG |
| 36 | Supplying and installing pressure switch with 12/15 mm diaisolation valve, G.I. nipple, elbow, etc complete as perspecification no. FF-FFA/PS |
| 37 | Supplying and erecting one no. brass orifice plate having 6 mm. thickness, 140 mm outer dia and required/proper diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP |
| 38 | Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve (size 400 x 400 x 400mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8\\"x6\\") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour. |
| 39 | Supplying and erecting A.B.C. type fire extinguisher 6 kgcapacity cartridge type with gun metal cap 150 gram CO2 gascartridge, powder and brackets conforming to IS 2171-1985/ IS 15683 and complete erected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete. |
| 40 | Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete. |
| 41 | Supplying & fixing foam type (9 ltrs cap.) fire extinguisher with brackets for wall mounting & necessary accessories. (D.G. Room) |
| 42 | Providing & Fixing screwed Brass Ball valve with wheel of Approved make quality (IS:778-1971) 20 Kg. class. 25 mm (1\\") dia. |
| 43 | Supplying, installing, testing and commissioning with perfectaligning, proper levelling of jockey pump of 240 LPM at 56 mhead, 15 HP (11 kW), 3 phase, 415 volt, 50Hz or of suitable HPwith suitable stages as per specification no. FF-MFP/JP |
| 44 | ELECTRICAL CONTROL PANEL FOR FIRE PUMPS |
| 45 | Supply, Installation,Testing and Commissioning of Sheet steel clad wall mounting control panel of approximate size 2500 mm x 2100mm x 300mm (h w x d) for control of Fire pumps having suitably rated incoming isolating switch incoming voltmeter with selector switch and fuses. Star Delta / DOL starter with hand reset overload cum shock preventor type relay, VOLTMETER, Ammeter to read current in any one phase. OFF/AUTO/MANUAL selector switch of approved make level switch for automatic control of pump. |
| 46 | Supply Installation, Testing and comissioning of 6 Zone Main PA Console Expandable upto 12 zones, Complete with suitable rack arrangement to house the entire PA system components. The system shall be equipped with relaying inbuilt automated messages in case of an emergency. |
| 47 | Supply, Installation Testing & Commissioning of Dual Tone Metal Grill Ceiling Mounted Speaker with all recquisite mouting accessories to mount the speaker on False Ceiling / True Ceiling.6 Watts with Tapping of 6/3/1.5W Brands: Bosch/Ateis/Honeywell. |
| 48 | Supply Installation, Testing and comissioning of Booster (Audio) Amplifiers sutaible to accommodate all above speakers, and Shall be connected to Main PA console Brands: Bosch/Ateis/Honeywell 250 Watt. |
| 49 | Supply, installation, Testing and Commissioning of Call Station With 6 Zone Selection Switch and microphone and accessories required to achive desired functionality. Complete with required accessories and cables Brands: Bosch/Ateis/Honeywell. |
| 50 | Supply, Installation Testing & Commissioning of Volume Control, Shall capable to override incase of fire Emergency.Brands: Sony/Samsung/Bosch. |
| 51 | Supply, Installation Testing & Commissioning of Dual Tone Metal Grill Wall Mounted Speaker with all recquisite mouting accessories to mount the speaker on False Ceiling / True Ceiling. 12 Watts with Tapping of 6/3/1.5W Brands: Bosch/Ateis/Honeywell. |
| 52 | Supply installation of 2 Core x 1.5 mm2, Multistranded AT Copper, FRLS Armoured cable, BLUE in Colour.The cable shall be laid on surface with GI saddle-spacers every 0.3 meters. Complete with GI Junction Box, lugs, cable compression glands, cable tags and Ferruling.Brands: Bosch/Ateis/Honeywell. |
| 53 | Supply Installation Of Terrace tank -Zinc allume tank for fire of capacity 25000 liters of size |
| 54 | Fire Signages Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender