Tender For Development Of Park With Open Gym At Arvi Village Under Csr Under Gouri Central Sub Area, Nit No. Wcl-Ba3650-Civ-E 26/2026-27/719 Dt.07.09.2026.
Tender Value
20.62 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
7 days left
EMD
25800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandrapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Park With Open Gym At Arvi Village Under Csr Under Gouri Central Sub Area, Nit No. Wcl-Ba3650-Civ-E 26/2026-27/719 Dt.07.09.2026.
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 2.28.1 All kinds of soil |
| 2 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure) |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 4 | Supplying and filling in plinth with sand under floors,including watering, ramming, consolidating and dressing complete. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding allcomplete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 10 | Brick work with clay Fly Ash bricks in foundation in cement morter 1:6(1 cement : 6 coarse sand) |
| 11 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 12 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required rubber moulded colour & pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 13 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 14 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 15 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 16 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers 16.70.1 Made of G.I. wire of dia 4 mm as required complete as per the direction of Engineer-in-charge. |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 18 | Painting with aluminium paint of approved brand and manufacture to give an even shade .Two or more coats on new work |
| 19 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 20 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarsesand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 21 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work-50 mm dia nominal bore |
| 22 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work-25 mm dia nominal bore |
| 23 | Making connection of G.I. distribution branch with G.I.main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore (Extra for suppply of fire) |
| 24 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 25 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment |
| 26 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm |
| 27 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 28 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately) |
| 29 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. |
| 30 | Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring,Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of hight 30cm to 45cm with 2-3 branches in 20 cm size of earthen pots/plastic pots as per direction of the officer in charge. |
| 31 | Providing and stacking of Foxtail palm of hight 180 cm to 210 cm bottom grith 25-30 cm well developed in big size HDPE bags as per direction of the officer-in-charge. |
| 32 | Providing and stacking of Tecoma stans of height 90-105 cm. bushy in big size HDPE bag as per direction of the officer-in-charge |
| 33 | Providing and stacking of Plumeria acutifolia of height 150-165 cm. with 3-4 branches in big size HDPE bag as per direction of the officer-in-charge. |
| 34 | Providing and stacking of Ficus panda of height 45-60 cm. with 6-7 branches and healthy foliage in p.bag of size 25 cm as per direction of the officer-in-charge. |
| 35 | Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. . |
| 36 | Providing and stacking of Hibiscus rosasinensis of height 60-75 cm. with 5-6 branches in p.bag of size 25 cm as per direction of the officer-in-charge. |
| 37 | Providing and stacking of Wedelia trilobata, full of leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 38 | Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.. |
| 39 | Providing and stacking of Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge. |
| 40 | Providing and fixing FRP Slide with used B class MS pipe with powder coated, playing area 4.5x2 m, Hight-1.71 M, Area-3.5x0.5 M, slide length-3.0 M or equivalent beside painting with glow expoxy finish paint etc. as per quotation attached, earth work in excavation C.C work as required also etc complete as per instruction of EIC. |
| 41 | Providing and fixing Double Swing with used B class MS pipe with powder coated, playing are 3.1x2.0 M, Hight-2.40 M, Area-3.0x1.5 M or equivalent beside painting with glow expoxy finish paint etc. as per quotation attached, earth work in excavation C.C work as required also etc complete as per instruction of EIC. |
| 42 | Providing and fixing See-Saw Double Board with used B class MS pipe with powder coated, playing are 4x2.0 M, Hight-0.9 M, Area-3.0x1.5 M or equivalent beside painting with glow expoxy finish paint etc. as per quotation attached, earth work in excavation C.C work as required also etc complete as per instruction of EIC. |
| 43 | Providing and fixing Sky walker made of 4 inch B class MS pipe with PU paint coated of size 1778x610x1828 mm safe paly area 2134mmx915mm, high tensile steel with GI nut & bolts to be used. Aluminium foote rest of size 300x150x5mm, high quality rubber grip for firm handling etc as per quotation attached, earth work in excavation C.C work as required also etc complete as per instruction of EIC. |
| 44 | Providing and fixing four wheel Shoulder Builder made of up to 4 inch B class MS pipe, prime stand duly bend, foundation center pipe with PU paint coated of size 1220x1220x1524 mm safe paly area 1828x1828mm, high tensile steel with GI nut & bolts to be used etc. as per quotation attached, earth work in excavation C.C work as required also etc complete as per instruction of EIC. |
| 45 | Providing and fixing Surf Board made of up to 4 inch B class MS pipe, prime stand duly bend, foundation center pipe with PU paint coated of size 915x762x1372 mm safe paly area 1524x1220mm, footrest fram support of dim. 250x150x5mm is welded for the MS seat of size 380x300x5mm seat used, high tensile steel with GI nut & bolts to be used etc as per quotation attached, earth work in excavation C.C work as required also etc complete as per instruction of EIC. |
| 46 | Providing and fixing Single Chest Presser made of up to 4 inch B class MS pipe, prime stand duly bend, foundation center pipe with PU paint coated of size 920x762x2134 mm safe paly area 1342x1220mm, seating fram support of dim. 250x150x5mm is welded for the MS seat of size 380x300x5mm seat used, permanent lubricated ball bearings, foundation plate of dia 225mm & 10mm thick is welded at bottom, high tensile steel with GI nut & bolts to be used etc as per quotation attached, earth work in excavation C.C work as required also etc complete as per instruction of EIC. |
| 47 | Providing and fixing Standing Triple Twister made of up to 4 inch B class MS pipe, prime stand duly bend, foundation center pipe with PU paint coated of size 1460x1460x1370 mm safe paly area 1828x1828mm, Round plate of dia. 300mm & 10mm thick jointed for standing and twisting, permanent lubricated ball bearings, foundation plate of dia 225mm & 10mm thick is welded at bottom, high tensile steel with GI nut & bolts to be used etc as per quotation attached, earth work in excavation C.C work as required also etc complete as per instruction of EIC. |
| 48 | Peoviding and fixing standard size precast RCC benches (1.5M) including trasportation etc all complete as per instruction of engineer in charge. |
| 49 | Providing and fixing of retro-reflectorised in formatory sign board rectangular/Square in shape having area greater than 0.9 OneSquare Meter rmade out of 4 mm aluminum sheet bonded with white retroreflective sheeting of Class B (Type IV Highin tensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heatactivated adhesive retoreflective specified background, border and back side retoreflctive symbols, letters, numerals,arrow as per IRC:67-2012 Table No8.3,supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on two no.mild steel angle iron post 75mm x75mm x6mm,3.5mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45cmx45cmx60cm, 60cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paint shaving alternate black and white bands of 25cm width including GI fixure sand transportation etc.complete.Then ut bo lts of board with angle iron post/supporting structure after fixing at site has to be electrically welded.ClassB(TypeIV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed area sand cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/ supplier. |
| 50 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 51 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 45 cm dia, and 45 cm deep |
| 52 | Providing and fixing FRP Rabit/Penguin dustbin of size Hight-1.50M or equivalanet beside painting with glow expoxy finish paint, earth work in excavation C.C work as required also etc complete as per instruction of engg in charge. |
| 53 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore |
| 54 | Providing and fixing 100mmd statriliser pipe line/ p.v.c soil vent/waste pipe and with necessary fixture and filtring such as bends, tees, single junction. Sloted vent clamp etc. |
| 55 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender