Tender For Construction Of 4 (Four) Nos. Of New Tower And Associated Work Between Loc-64 To 69 Of 132Kv Sonapur-Baghjap D/C Transmission Line
Tender Value
1.68 Crore
Estimated cost
Bid Submission
29 Sep 2026
16 days left
EMD
3.37 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 4 (Four) Nos. Of New Tower And Associated Work Between Loc-64 To 69 Of 132Kv Sonapur-Baghjap D/C Transmission Line
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Sep-2026 | Corrigendum-2 | Technical Bid | 29-Sep-2026 |
| 2 | 08-Sep-2026 | Corrigendum-1 | BOQ | 29-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Angle tower (B type) Superstructures |
| 2 | i) Galvanized steel works including hangers, gussets, strain plates etc. (i.e. no of tower x MT/tower) |
| 3 | ii) Galvanized iron nuts & bolts, spring washers, step bolts etc. i.e No of tower x MT/tower |
| 4 | B+3 Meter Extension Body |
| 5 | (a) Galvanized steel works including hangers, gussets, strain plates etc. (i.e. no of tower x MT/tower) |
| 6 | (b) Galvanized iron nuts & bolts, spring washers, step bolts etc. |
| 7 | Stub set of Four (1.5 m raised) |
| 8 | (a) Partially galvanized stub angle |
| 9 | (b) Galvanized iron nuts & bolts, spring washers, step bolts etc. |
| 10 | B+9 meter Extension Body |
| 11 | (a) Galvanized steel works including hangers, gussets, strain plates etc. (i.e. no of tower x MT/tower) |
| 12 | (b) Galvanized iron nuts & bolts, spring washers, step bolts etc. |
| 13 | Stub set of Four (1.5 m raised) |
| 14 | (a) Partially galvanized stub angle |
| 15 | (b) Galvanized iron nuts & bolts, spring washers, step bolts etc. |
| 16 | Tower accessories |
| 17 | Procurement of danger plates |
| 18 | Procurement of Phase plates (set of three) |
| 19 | Procurement of number plates |
| 20 | Procurement of circuit plate |
| 21 | Procurement of anti-climbing device |
| 22 | Power Conductor |
| 23 | 37/3.15mm All Aluminium Alloy Conductor (Panther){for loc65 - 69= 1.7 kms x 6 = 10.2 Kms |
| 24 | POWER CONDUCTOR ACCESSORIES |
| 25 | Stock Bridge type Vibration Damper |
| 26 | GROUND WIRE ACCESSORIES |
| 27 | 7/3.15mm, GI Ground wire(1.7 kms) |
| 28 | Strain Clamp (tension) for above gound wire |
| 29 | Earth wire connectors |
| 30 | Cleat clamps for clamping earth wire to structure |
| 31 | INSULATORS AND INSULATOR STRING HARDWARE |
| 32 | (i) 90kN, porcelain disc insulator |
| 33 | (ii) Single Tension Hardware fittings(Dead end Type) for \\"AAAC\\" Panther Conductor along with all accessories,clamps etc |
| 34 | (ii) Double Tension Hardware fittings(Dead end Type) for \\"AAAC\\" Panther Conductor along with all accessories,clamps etc |
| 35 | Angle tower (B type) Superstructures |
| 36 | i) Galvanized steel works including hangers, gussets, strain plates etc. (i.e. no of tower x MT/tower) |
| 37 | ii) Galvanized iron nuts & bolts, spring washers, step bolts etc. i.e No of tower x MT/tower |
| 38 | B+3 Meter Extension Body |
| 39 | (a) Galvanized steel works including hangers, gussets, strain plates etc. (i.e. no of tower x MT/tower) |
| 40 | (b) Galvanized iron nuts & bolts, spring washers, step bolts etc. |
| 41 | Stub set of Four (1.5 m raised) |
| 42 | (a) Partially galvanized stub angle |
| 43 | (b) Galvanized iron nuts & bolts, spring washers, step bolts etc. |
| 44 | B+9 meter Extension Body |
| 45 | (a) Galvanized steel works including hangers, gussets, strain plates etc. (i.e. no of tower x MT/tower) |
| 46 | (b) Galvanized iron nuts & bolts, spring washers, step bolts etc. |
| 47 | Stub set of Four (1.5 m raised) |
| 48 | (a) Partially galvanized stub angle |
| 49 | (b) Galvanized iron nuts & bolts, spring washers, step bolts etc. |
| 50 | Tower accessories |
| 51 | Procurement of danger plates |
| 52 | Procurement of Phase plates (set of three) |
| 53 | Procurement of number plates |
| 54 | Procurement of circuit plate |
| 55 | Procurement of anti-climbing device |
| 56 | Power Conductor |
| 57 | 37/3.15mm All Aluminium Alloy Conductor (Panther){for loc65 - 69= 1.7 kms x 6 = 10.2 Kms |
| 58 | POWER CONDUCTOR ACCESSORIES |
| 59 | Stock Bridge type Vibration Damper |
| 60 | GROUND WIRE ACCESSORIES |
| 61 | 7/3.15mm, GI Ground wire(1.7 kms) |
| 62 | Strain Clamp (tension) for above gound wire |
| 63 | Earth wire connectors |
| 64 | Cleat clamps for clamping earth wire to structure |
| 65 | INSULATORS AND INSULATOR STRING HARDWARE |
| 66 | (i) 90kN, porcelain disc insulator |
| 67 | (ii) Single Tension Hardware fittings(Dead end Type) for \\"AAAC\\" Panther Conductor along with all accessories,clamps etc |
| 68 | (ii) Double Tension Hardware fittings(Dead end Type) for \\"AAAC\\" Panther Conductor along with all accessories,clamps etc |
| 69 | A Tower no 65:(B+3) FS with 1.5 M raised height |
| 70 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. 2.9.3 Hard rock (blasting prohibited) |
| 71 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 72 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 73 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 74 | CARRIAGE OF MATERIALS (Sand, stone aggregate, cement, steel etc.)By Manual Labour including loading, unloading and stacking for lead less than 0.50 KM |
| 75 | B. Tower no 66:(B+9) FS with 1.5M raised height |
| 76 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. 2.9.3 Hard rock (blasting prohibited) |
| 77 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 78 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 79 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 80 | CARRIAGE OF MATERIALS (Sand, stone aggregate, cement, steel etc.)By Manual Labour including loading, unloading and stacking for lead less than 0.50 KM |
| 81 | C. Tower no 67:(B+9) FS with 1.5M raised height |
| 82 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. 2.9.3 Hard rock (blasting prohibited) |
| 83 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 84 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 85 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 86 | CARRIAGE OF MATERIALS (Sand, stone aggregate, cement, steel etc.)By Manual Labour including loading, unloading and stacking for lead less than 0.50 KM |
| 87 | D. Tower no 68:(B+3) FS with 1.5 M raised height |
| 88 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. 2.9.3 Hard rock (blasting prohibited) |
| 89 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 90 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 91 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 92 | CARRIAGE OF MATERIALS (Sand, stone aggregate, cement, steel etc.)By Manual Labour including loading, unloading and stacking for lead less than 0.50 KM |
| 93 | Erection and Dismantling |
| 94 | Setting of stubs (sets of four) including transportation and distribution of stubs and accessories fom store to site excluding cost of excavation, concreting and back filling |
| 95 | Super Structure erection including transportation of structures by any means and distribution of sctructures and accessories from store to site including +3 and +9 mtr extension |
| 96 | De-Stringing of AAAC Panther conductor of existing 132kV Transmission line, re-rolling of empty drums, Removal of hardware fittings,insulator and accessories, loading and unloading,transportation to AEGCL store |
| 97 | Dismantling of tower without damaging the members, transportation to the store and proper staking |
| 98 | Stringing of power conductors including transportation from stores and distribution of conductors and accessories to sites and laying , stringing, tensioning, clamping, jointing, jumpering and hoisting of insulators complete including cost of all fittings and accessoriesloc 65-69= 1585 m x 6 conductor= 9.5 kms |
| 99 | Restringing of conductor for adjustment of sag (with roller support) loc-63-65= 666m |
| 100 | Opening and lowering of ground wire from the portion of the line to be dismentled and transportation to the storeloc64-69= 1629m |
| 101 | Stringing of ground wire including transportation and distribution of ground wire and accessories to site and laying, stringing, tensioning, clamping, jointing, complete including all fittings and accessories |
| 102 | Grounding of towers with 3m long 25mm dia G.I. Pipe including cost of all materials such as G.I pipe, G.I nuts & bolts and washer, salt, coke etc as per specification (Tower footing Resistance measured value must be less than 10 Ω) |
| 103 | Painting of towers with bituminous paints of approved quality upto 3 meters from ground level including cost of paints. |
| 104 | RCC/PCC/mufflering work upto 1.2m from ground level. |
| 105 | Erection of danger plate (1 no per tower) |
| 106 | erection of phase plate (6 no per tower) |
| 107 | Erection of number plates (1 no per tower) |
| 108 | Erection of circuit plate |
| 109 | Erection of anti-Climbing device (1 set per tower) |
| 110 | Welding of nuts and bolts of newly erected tower upto bottom cross arm level including all charges of transportation,materials and labour. |
| 111 | Detail and check survey as per specification |
| 112 | ERS (2 Nos. ERS will be required for each location. Total 8 Nos. ERS works to be executed) |
| 113 | Leveling and preparation of ERS installation site |
| 114 | Sorting and loading of ERS, T&P material on transportation truck (in Kahilipara Store) |
| 115 | Transportation of ERS, T&P materials on truck to site camp and unloading at nearest motorable spot near site camp(i.e. 5.5 MT for 100 Kms upto site) |
| 116 | Carrying of ERS materials from unloading site to camp site |
| 117 | Anchoring including excavation for 5 numbers of Anchors |
| 118 | Erection of 1 ERS tower |
| 119 | Dismantling of conductor(3 nos) form existing line of location |
| 120 | Restringing of conductors (3 nos) in ERS tower including re-arrangement of all hardware fitting and accessories. |
| 121 | Re-jumpering of conductors. |
| 122 | Loading and Transportation of T&P materials on truck from site camp to Kahilipara after completion of ERS erection and unloading |
| 123 | Additional Head loading of ERS materials as site is around 1km from motoroable locations |
| 124 | ERS DISMANTLING WORK (2 Nos. ERS will be required for each location. Total 8 Nos. ERS works to be executed) |
| 125 | Loading & Transportation of T&P materials on truck from Kahilipara Store to site and unloading |
| 126 | Dismantling of Conductors (3 nos) from ERS tower |
| 127 | Dismantling of ERS tower (1 nos) including de-Anchoring |
| 128 | Carrying of ERS, T&P materials from actual site camp site to motorable place where transportation Truck is located |
| 129 | Loading & Transportation of ERS, T&P materials on truck from site to Kahilipara Store and unloading(i.e. 5.5 MT for 80Kms upto site) |
| 130 | Additional Head loading of ERS materials as site is around 1km from motoroable locations Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 16 days
Sep 29, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 16 daysSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender