Tender For Repair And Renovation Of Sarojini Naidu Girls Hostel :- 1. Repair/ Renovation Of Sarojini Naidu Girls Hostel At Main C Us, University Of Jammu, Jammu, Including providing and Fixing Of New Wire Gauge Shutters To Existing Door Of Rooms. 2.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Sep 2026
9 days left
EMD
96222
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Sarojini Naidu Girls Hostel :- 1. Repair/ Renovation Of Sarojini Naidu Girls Hostel At Main C Us, University Of Jammu, Jammu, Including providing and Fixing Of New Wire Gauge Shutters To Existing Door Of Rooms. 2. Repair/ Renovation Of Wing 1, 3 & 5 Washrooms Of Sarojini Naidu Girls Hostel At Main C Us, University Of Jammu, Jammu. 3. Repair/ Renovation Of Wing 2, 4 & 6 Washrooms Of Sarojini Naidu Girls Hostel At Main C Us, University Of Jammu, Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 3 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 4 | 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 6 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 7 | Repair to plaster of thickness 12mm to 20 mm including cutting the patch & preparing & plastering the surface of the walls complete including disposal of rubbish to the dumping ground with in 50 m lead. With cement mortar 1:4 coarse sand. |
| 8 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position complete.a. Second class deodar wood |
| 9 | Sal wood |
| 10 | Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or/and black enamelled M.S. butt hinges with necessary screws : Second class deodar wood |
| 11 | Providing and fixing 30 mm glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt hingeS bright finished of required size with necessary screws.Second class deodar wood |
| 12 | Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: a 150x10 mm |
| 13 | 200x10mm |
| 14 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: a. 125mm |
| 15 | 200 mm |
| 16 | P/F of following items incl. cost of necessary scews,nails,fevicol etc complete. ISI Marked a. Wire Gauge |
| 17 | Al. Casement stays (IS:1868) |
| 18 | 4 mm Ply ( commercial ) |
| 19 | 12 mm Ply ( commercial ) |
| 20 | Twin rubber hanging door stopper |
| 21 | ACP Sheet |
| 22 | Aluminum Sheet |
| 23 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm |
| 24 | Removing Dry / Oil bound Distemper by scrapping , sand papering and preparing the surface smooth including necessary repair to scratches etc. complete |
| 25 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete. |
| 26 | Distempering with O.B. Distemper washable distemper of approved brand & manufacture to give an even shade new work (two or more coats) over & including priming coat with cement primer |
| 27 | one or more coats on old work |
| 28 | Painting with Synthetic Enamel paint of approved brand and Manufacture to give an even shade one or more coats on old work |
| 29 | two or more coat on new work |
| 30 | Supply of Labour for different works Mazdoor |
| 31 | Carpenter II Class |
| 32 | Welder along with welding set & rods etc. |
| 33 | Assistant Fitter or 2nd class Fitter |
| 34 | Renewing glass panes, with wooden fillets wherever necessary: Float Glass panes of Thickness 4mm (weighing 10 Kg/Sqm) |
| 35 | Providing and fixing lSI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size. |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 37 | Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead. |
| 38 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase |
| 39 | Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska |
| 40 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or re-plastering, including disposal of rubbish to the dumping ground within 50 meters lead. |
| 41 | Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality.Rectangular shape 600x450 internal dimensions |
| 42 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 43 | P/F trap PVC make of self cleansing design with screwed down, including cost of cutting and making good the walls and floors 100x75mm (Prince, Supreme, Finolex make) |
| 44 | P/F C. P. Grating 100mm dia. |
| 45 | Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete. |
| 46 | Providing and fixing CP towel rail (heavy type) including end brackets cost of wooden/PVC plugs with screw complete of size 600 x 20 mm of approved make. |
| 47 | Providing and fixing PTMT shelf 440mm long, 124mm width and 36mm height of approved quality, colour and make, weighing not less than 300 gms (Prayag or equivalent). |
| 48 | Providing and laying PVC pipe of following dias (Prince, Supreme, Finolex make) 4 kg/cm2 pressure in ground/on walls in case of Rain Water Pipe including all PVC fittings jointing with adhesive of approved make ,making good the same etc. complete. Nothing extra shall be paid. a. 80mm |
| 49 | 100mm |
| 50 | 150 mm |
| 51 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(Prince, Supreme, Finolex make) a. 75 mm bend |
| 52 | 110 mm bend |
| 53 | Single tee with door 110x110x110 mm |
| 54 | Cleaning of Manholes including clearing of drain pipes from manhole to manhole for making the lines fully functional and disposal of mulba from the site as directed by the engineer Incharge. |
| 55 | Providing and fixing of CP Handjet of of superior quality (Hindware/Cera/Parko) |
| 56 | P&F white vitreous china pedestal type (European type/wash down type) water closet pan (Parry ware/ Hindware/ Cera make) |
| 57 | P&F solid plastic seat with lid for pedestal type W.C. pan complete. White colour. |
| 58 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge |
| 59 | Providing and fixing CP pillar cock of approved quality 15 mm nominal bore. Complete (Make Cera/Hindware/essco/Parko) |
| 60 | P/F G.I. pipes complete with G.I. fittings (Medium Grade) & clamps including cutting holes/chases in walls and making good the same/earth work in trenches. a. 15 mm nominal bore |
| 61 | 20 mm nominal bore |
| 62 | 25mm nominal bore |
| 63 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 (Essel/Jaquar/Parko make) |
| 64 | P&F of C.P shower rose with 15/20 mm inlet including rod with necessary plugs and screws. 100 mm dia (Cera/Essel/Hindware make) |
| 65 | P&F low level PVC flushing cistern with manually controlled device (handle lever) conf. To IS: 7231 with fitting & fixtures complete (Parryware/Cera/Hindware) 10 Liter Capacity – White. |
| 66 | P&F CP brass angle valve for basin mixture Geyser points/wash basins of ‘Parko/Cera’ make 15mm nominal bore (Parko/Cera/Essel Make) |
| 67 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps (Parko/Cera/Essel Make). |
| 68 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 69 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (Parko/Cera/Essel Make) |
| 70 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 (Parko/Cera/Essel Make) |
| 71 | P&F of unplasticised PVC connection pipe with bass union 45 cm length & 15 mm nom. Bore |
| 72 | Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 Cement: 4 coarse sand) including grouting the joints with cement and matching pigments etc complete. Size of tile 60×60cm |
| 73 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 74 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown |
| 75 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 76 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)For fixed portion Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 77 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 78 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. Pre-laminated particle board with decorative lamination on both sides. |
| 79 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 80 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer in- plate etc. complete as per the direction of Engineer-in-charge.With Stainless Steel cover plate minimum 1.25 mm thickness. |
| 81 | Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 82 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil 1 meter from cutting edge |
| 83 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design Inside size 90x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 84 | Tractor Trolly along with labour to load and unload mulba and disposal of mulba at the dumping area. |
| 85 | Cleaning of terrace/loft water storage tank (inside surface area) upto2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock isdamaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 86 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 87 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm. and below |
| 88 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size |
| 89 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20mm nominal size stone aggregate. |
| 90 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 91 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30mm |
| 92 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty :Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) |
| 93 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete :250x16mm |
| 94 | P&F white vitreous china water closet squatting pan.( Indian type) Orissa Pattern W.C. pan of size 580x440mm (Cera/Parryware/Hindware make) |
| 95 | P&F of PVC waste pipe for sink or wash basin including P.V.C. waste fitting complete Semi Rigid Pipe 32/40 mm |
| 96 | Providing and fixing CP soap dish holder of superior quality |
| 97 | P/F Ball Valve (Full way valve) made of cast brass including handle: ( Ship / DRP/Zoloto Make)a. 15mm nominal bore |
| 98 | 20mm nominal bore |
| 99 | 25mm nominal bore |
| 100 | P/F of P.V.C. P/S trap 100 mm size complete job. |
| 101 | P/f G.I. Union in existing G.I pipe line cutting & threading the pipe & making long screws including excavation, refilling the earth or cutting of wall & making good the same complete wherever required. (Ship/Unik/DRP make) a. 15 mm nom. Bore |
| 102 | 20mm nom. Bore |
| 103 | P&F of P.V.C. water tank covers on existing water tanks. |
| 104 | Providing and fixing PTMT Ball cock of approved quality, color and make complete with Epoxy coated aluminum rod with L.P./H.P.H.D plastic ball (Prayag or equivalent).25 mm nominal bore |
| 105 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 106 | Providing and fixing CP towel ring including brackets cost of wooden/PVC plugs with screw complete. |
| 107 | Providing & laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen & the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. Per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). |
| 108 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender