Tender For Repair To False Ceiling, Flooring, Gates Etc Of Hangars In Various Units Of Tech Area In Avn Bde Units And Repairs To Roof, Ceiling Flooring Etc In Certain Md Accn In Narayan Enclave And Defence Colony At South Of Rly Line Under Ge Missama
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Sep 2026
12 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To False Ceiling, Flooring, Gates Etc Of Hangars In Various Units Of Tech Area In Avn Bde Units And Repairs To Roof, Ceiling Flooring Etc In Certain Md Accn In Narayan Enclave And Defence Colony At South Of Rly Line Under Ge Missamari
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed. |
| 2 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 3 | S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with L-type or cranked hook bolts complete all as specified and as directed. |
| 4 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer, dismantling existing unserviceable one complete all as specified and as directed. |
| 5 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165, including necessary prepration of surface and applying a coat of red oxide zinc chrome primer, dismantling existing unserviceable one complete all as specified and as directed. |
| 6 | Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and directed. |
| 7 | M & L for glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointedin Adhesive Compound as per manufacturers instruction & painted in white or colour cement to match including sreed bed 10 mm thick in cement mortar 1:4 complete all as specified and directed. |
| 8 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in in Adhesive Compound as per manufacturers instruction and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed. |
| 9 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in Adhesive Compound as per manufacturers instruction and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, complete all as specified and directed. |
| 10 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in dado/skitting etc. set and jointed in Adhesive Compound as per manufacturers instruction and pointed in white or coloured including 10 mm thick Screed bed or bedding layer of cement mortar 1:4, for laying floor finishes, complete all as specified and directed. |
| 11 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but noextra payment on this account shall be made. |
| 12 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and as directed.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 13 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 14 | Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work of any description complete all as specified and as directed. |
| 15 | S&F Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm, Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework with screws all as specified complete complete all as specified and directed. |
| 16 | M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/inserted to GI/Aluminium framework with screws fixed in ceiling flat or sloping as specified and directed. |
| 17 | Taking down Shutters of any description exc 1 sqm and not exc 2.00 sqm and refixing in the same opening complete all as specified and as directed. |
| 18 | Removing complete existing treatment incl pcc pedding of roof surfaes by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed. |
| 19 | M&L for brushing neat cement slurry with 03 Kg of cement complete all as specified and directed. |
| 20 | M&L rendering 10mm thick with cement mortar 1:4 on fair faces of brick work in two layers (10mm and 10mm) sperately mixed with water proofing compund in top layer as per manufacturers instruction and finishing the surfaces even and smooth witout using extra cement complete all as specified and directed. Note:- WPC shall be measured & paid separately. |
| 21 | M&L 25mm thick cement concrete PCC type B0 1:2:4 using 12.5 mm gradedaggregate complete all as specifie and directed. |
| 22 | M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following course of treatment/specification from bottom to top, complete all as specified and directed:-(i) Applying one coat of cold bituminous primer 85/25 at the rate of 1.2 Kg per sqm including cleaning surfacs.(ii) Supply and laying 3mm thick APP based olymeric membrane of approved manufacturer with weight not less than 3.50 Kgs per Sqm, reinforced with non-woven polyester febric weight not less than 160gms per Sqm. Polymeric membrane shall be taken to a height of 30cm(minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrane flashing.(iii) Applying two coats of aluminum paing over the APP membrane. |
| 23 | M&L plain cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate) as in in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 24 | M&L two coat Damp proof paint in wall ceiling for arresting leakage and seepage complete all as specified and directed by Engr-in-Charge. |
| 25 | Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and directed. |
| 26 | S&F anodised aluminium frame for doors, windows, ventileters with one or more rebates including joining cleat for fixing etc complete all as specified in cl power coating above aluminium section.(minimum thickness of poweder coating 50 micron) complete all as specified and directed. |
| 27 | S&F powder coated anodised aluminium frame for doors, windows, ventileters with one or more rebates including joining cleat for fixing etc complete all as specified in cl power coating above aluminium section.(minimum thickness of poweder coating 50 micron) complete all as specified and directed. |
| 28 | S&F for powder coated anodised window/ventiletor shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no complete all as specified including power coating of any colour (thickness of powder coating not less than 50 micron) complete all as specified and directed. |
| 29 | S&F 4mm thick sheet glass, ordinary quality and glazing with Woodedn beads in squares not execeeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 30 | M&L 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed in aluminum frame work complete all as specified and directed. |
| 31 | S&F stainless steel wire netting with 1.40 nominal dia of wire with tinned tacks of stainless steel wire staples, 12mm mesh size complete all as specified and directed. |
| 32 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixed in opening as specified in SSR Part I, Section 8 complete all as specified and as directed. |
| 33 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes far top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification & drawing as specified in SSR Part I, Section 8 complete all as specified and as directed. |
| 34 | S&F Pressed steel frames for doors with one or more rebates,1.25mm thk cold rolled mild steel sheet, size of frame 125 x 60mm including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and as directed. |
| 35 | S&F Pressed steel frames for doors with one or more rebates,1.25mm thk cold rolled mild steel sheet, size of frame 105 x 60mm including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and as directed. |
| 36 | M&L providing plain cement concrete type C-0, (1:3:6), (using 20 mm graded stone aggregate), as in fixing of hold fast, back filling of pressed steel door frame including necessary form work as required complete all as specified and directed. |
| 37 | S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 38 | S&F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.24(a), complete all as specified and as directed. |
| 39 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples GI wire cloth with 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed. |
| 40 | S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 41 | S&F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 42 | S&F 150 mm long Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 43 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed. |
| 44 | S&F in repair, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 45 | Taking down rainwater pipes (any size or pattern), including all fittings, complete all as specified and directed. |
| 46 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/Ceilings complete all as specified and as directed. |
| 47 | S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 48 | S&F 75mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls/ Ceilings complete all as specified and as directed. |
| 49 | S&F 75mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 50 | Fixing only 20mm bore GI tubing with new fittings fixed to walls and ceilings or laying in floors and making good to walls including necessary cleaning of pipe complete all as specified and as directed. |
| 51 | Fixing only 25mm bore GI tubing with new fittings fixed to to walls and ceilings or laying in floors and making good to walls complete all as specified and as directed. |
| 52 | M&L Aluminum (die cast) body Door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 53 | S&F in repair,15mm bore Bib taps, fancy type, chromimum plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 54 | S&F in repair, 15mm bore stop valves fancy type cast copper alloy, chromium plated with long shank and cup, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed. |
| 55 | S&F in repair, 15mm bore pillar taps, cast copper alloy with capston heads, chromium plated, fancy type, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed |
| 56 | S&F in repair, health faucet suitable for 15mm dia pipe, 1.25 meter long easy flexible tube in chrome finish & wall hook all as specified and as directed |
| 57 | S&F in repair,10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let ball valve float and handle, PVC flush pipe, complete all as specified and as directed. |
| 58 | S&F PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and as directed. |
| 59 | M&L 75mm dia. of outlet PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed. |
| 60 | S&F in repair, Vitreous China wash down water closet pan, pedestal pattern white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 61 | S&F in repair, vitreous China wash basin, white, flat back, size 550x400mm including brackets cutting for and pinning in ends of brackets or erecting stand, and 32 mm bore Waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed including 32mm dia PVC solid waste pipe 800mm long complete all as specified and as directed. |
| 62 | S&F in repair, Vitreous China squatting pan \\"Orissa\\" pattern size 630x450mm white with integral foot rest , including S or P traps (Excluding flushing cistern & flush pipe), laid over 150mm thick cement concrete (1:5:10) type E2 using (40mm graded aggregate) of complete all as specified and directed. |
| 63 | S&F in repair,PVC connection 15mm size with PTMT nuts, 450mm long complete all as specified and as directed. |
| 64 | S&F in repair, Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 65 | S&F in repair, 600x450mm bevelled edge mirror of selcted quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed |
| 66 | S&F in repair, 125mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 67 | M&L 100mm thick cement concrete type D-2 (1:2:4) using 40 mm graded stone aggregate as in Path/Hardstanding finished even and fair without using extra cement including demoliation of existing old unserviceable concrete of any description complete all as specified and directed. |
| 68 | Dismantling water tanks of any description, capacity exc 500 ltr and not exc 1000 ltr complete all as specified and directed. |
| 69 | S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks, Four layer white colour (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210gms), complete in all as specified and as directed. |
| 70 | S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks, Four layer white colour (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210gms), complete in all as specified and as directed. |
| 71 | Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete including removing debries of the site, complete all as specified and as directed. |
| 72 | M&L Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and fair complete all as specified and as directed. |
| 73 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 74 | M&L Granite (of any type) tiles 18-20mm thick machine cut, as in floor laid bedded and jointed in Adhesive Compound as per manufacturers instruction and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including including 20 mm thick Screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed. |
| 75 | M&L Granite (of any type) tiles 18-20mm thick machine cut, as in vertical surfaces,laid bedded and jointed in Adhesive Compound as per manufacturers instruction and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 10 mm thick Screed bed or bedding layer of cement mortar 1:4, complete all as specified and directed. |
| 76 | Demoliation of cement Concrete(unreinforced) in any position complete all as specified and as directed. |
| 77 | M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:3 finished even and smooth, without using extra cement including mixing of water proofing compound wherever required for floors and sides of wall in sunken floors, complete all as specified and directed. Note Water proofing compound will be measured separately. |
| 78 | M&L applying one coat of NITTO proof to sides and bottom of floors to sunken floors complete all as specified and directed. |
| 79 | M&L PCC (1:5:10) type E-2 (using 40 mm graded stone aggregate) as in filling and mass conctete, complete all as specified and as directed. |
| 80 | M&L preperation of new plastered surfaces of walls and applying three coats of white wash,complete all as specified and as directed. |
| 81 | M&L preparation of old wall surface applying one coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, complete all as specified and directed. |
| 82 | M&L for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm complete all as specified and directed. |
| 83 | M&L for preparation of old decorated plastered surface of wall and applying one coat of cement base paint using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS as in wall and complete all as specified and as directed. |
| 84 | M&L preparation of old wood surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 85 | M&L preparation of old steel surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 86 | M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described appling applying two coat of synthetic enamel paint over one coat of pink primer,complete all as specified and directed.. |
| 87 | M&L Preparation of new or previously untreated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling applying two coat of synthetic enamel paint over one coat of pink primer,complete all as specified and directed. |
| 88 | Taking down/Dismantling wrought iron or mild steel work of any description complete all specified and directed. |
| 89 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165) complete all specified and directed. |
| 90 | M&L Light coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in Adhesive Compound as per manufacturers instruction and pointed in white or coloured cement to match including 10 mm thick Screed bed or bedding layer of cement mortar 1:4, complete all as specified and directed. |
| 91 | M&L Glazed ceramic coloured tiles in vertical surfaces 600x 600x 10mm thick set and jointed in in Adhesive Compound as per manufacturers instruction & pointed in white or colour cement to match including backing coat 10 mm thick in Cement Mortar 1:4, complete all as specified and directed. |
| 92 | M&L Heavy duty coloured vitrified tiles 300x 300x10mm thickin floors set and jointed in Adhesive Compound as per manufacturers instruction & pointed in white or colour cement to match set and jointed in in Adhesive Compound as per manufacturers instruction and pointed in white or coloured including 15mm thick Screed bed or bedding layer of cement mortar 1:4, for laying floor finishes, complete all as specified and directed. |
| 93 | M&L Heavy duty coloured vitrified tiles 300x 300x10mm thick in dado/skitting set and jointed in Adhesive Compound as per manufacturers instruction & pointed in white or colour cement to match set and jointed in in Adhesive Compound as per manufacturers instruction and pointed in white or coloured including 10mm thick Screed bed or bedding layer of cement mortar 1:4, for laying floor finishes, complete all as specified and directed. |
| 94 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed. |
| 95 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish from the site complete all as specified and as directed. |
| 96 | M&L for Brickwork with sub class -B bricks, straight or curved on plan to any radius built in cement mortar 1:6 complete all as specified and as directed. |
| 97 | M&L for brick work with sub class -B bricks, built in cement mortar 1:4 straight or curved on plan to any radius in half brick thick walls complete all as specified and directed. |
| 98 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc,complete all as specified and directed. |
| 99 | Supply only integral water proofing compound complete all as specified and directed |
| 100 | M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered/putty surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick acrylic wall care putty complete all specified and directed. |
| 101 | M&L for preparation of new plastered surface of walls and applying two coat of cement base paint over a coat of primer complete, all as specified and directed |
| 102 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of acrylic distemper including one coat of chalk whiting on plastered/putty surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick acrylic wall care putty complete all specified and directed. |
| 103 | S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door, complete all as specified and directed. |
| 104 | S&F 110 mm bore PVC (SWR) Vent Cowl,complete all as specified and directed. |
| 105 | S&F 75 mm bore PVC (SWR) Vent Cowl,complete all as specified and directed. |
| 106 | S&F stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nut and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender