Tender For Repairing Of The Street Lighting System At Babu Paar Uttaran And Other Uttaran Areas In Ward No 131.
Tender Value
2.38 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
8 days left
EMD
4800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of The Street Lighting System At Babu Paar Uttaran And Other Uttaran Areas In Ward No 131.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of foundation of existing pole below G.L. having ofdimension of 0.6 x 0.6 x 0.6 mtr (2'x 2'x2') with graded stone chips(19mm down) in cement concrete proportion of 6:3:1 after necessaryexcavation including scraping. |
| 2 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, asgiven below with ready mixed paint/primer of(approved make, andbrand incl. preparation of surface by sand paper/emery paper,cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. longpole.(i)1st coat of aluminium paint over 1 coat of RO priming |
| 3 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, asgiven below with ready mixed paint/primer of(approved make, andbrand incl. preparation of surface by sand paper/emery paper,cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. longpole.ii2nd coat of aluminium paint over 1st coat |
| 4 | SCHEDULE OF RATES FOR EARTHINGINSTALLATIONS.Earthing Installation ... with Pipe Electrode.Earthingwith 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4SWG GI (HOT Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GIbolts, double nuts, double washers incl. S & F 15 mm dia GI pipeprotection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an averagedepth of 3.65 Mts. below the ground level as below:(a)By ISI MediumGI pipe. |
| 5 | SCHEDULE OF RATES FOR OVERHEAD LINE INSTALLATION -REPAIR 11. Providing CC (6:3:1) muffing 0.3 mtr dia upto the heightof 0.3 mtr. above the ground level around the pole base completewith 3 mm thick neatly finished cement plaster all-round afterdismantling the unserviceable muffing if necessary |
| 6 | CHAPTER - II LAYING & JOINTING PIPES, SPECIALS ETC.2.1 C.I./ D.I. Pipe & Specials 2.1 C.I. / D.I. Pipe & Specials 2.3 M.S. Pipes2.3.1 Gas cutting of M.S. pipes and/or M.S. plates of differentthickness all complete as per specification and direction of theEngineer-in- Charge. Thikness in mm 5mm to 8mm thick plate |
| 7 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. B. REPAIRING 2. Welding in M.S. structural work withgas or electric: (b) Continuous weld. |
| 8 | CHAPTER - VIII SUPPLYING OF MATERIALS E. E. R. W. MSBLACK PIPE 8.15 Sypply of E.R.W.M.S. (Electrical Resistant WeldedM.S.) black pipe of ISI Mark as per relevent IS Specification ( heavyquality ) having wall thickness not less than 5 mm. [N.B.: The rates forsupply of TATA Make pipe will be arrived at by adding 20% of thecorresponding rates ] Diameter in mm (Internal)150 |
| 9 | Supplying Al.conductor PVC insulated and sheathed unarmoredcable(1.1KVgrade, Gloster/Havells/Polycab). 10sqmm x 2core |
| 10 | Supply and drawing of 7/14 SWG galvanised stranded wire fordrawing unarmored cable (supply of cable is not included in thescope) by catenary system of wiring with 3nos. reel insulator per mtr.and binding with binding wires etc,as reqd. for drawing |
| 11 | Drawing of unarmoured cable of suitable size (supply of cable is notincluded in the scope)on existing Galvanized stranded wire forcentenary system with reel insulators and binding wires. |
| 12 | Supplying Al.conductor PVC insulated and sheathed unarmoredcable(1.1KVgrade,Gloster/Havells/Polycab). 4sqmm x 2core |
| 13 | Laying through RCC/Hume/GI Pipe.(a)Laying only Cable upto 50sqmm through existing RCC/Hume/ GI Pipe/open masonary trenchFOR single, 2, 3, 3... & 4 core |
| 14 | Removing of luminaries with lamp from the pole/column and keeping them ready for dispatch as per direction of EIC: HPMV/HPSVluminaries/MH/LED street light fittings. |
| 15 | SUPPLY & DELIVERY OF LED OUTDOOR FITTINGS 100 WATTBIS APPROVED.(THE MAKERS OF THE ABOVE MENTIONED SUPPLY ITEMS WILL BE SPECIFIED BY THE ENGINEER-IN-CHARGE (EIC) AT THE TIME OF SUPPLY.) |
| 16 | SUPPLY & DELIVERY OF LED OUTDOOR FITTINGS 40 WATTBIS APPROVED.(THE MAKERS OF THE ABOVE MENTIONED SUPPLY ITEMS WILL BE SPECIFIED BY THE ENGINEER-IN-CHARGE (EIC) AT THE TIME OF SUPPLY.) |
| 17 | Hoisting fixing and commissioning of luminaries including makingnecessary connection and earthing attachment: HPMV/HPSVluminaries/LED fittings of any wattage. |
| 18 | Sub Total |
| 19 | GST 18% |
| 20 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender