Tender For Repairing, Servicing, Overhauling Of 1 No Vnc Pump And Allied Electro-Mechanical Works At Ser Ore Ls-Iii Under Gap-I, Em, Kmda.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Sep 2026
5 days left
EMD
4650
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hooghly → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing, Servicing, Overhauling Of 1 No Vnc Pump And Allied Electro-Mechanical Works At Ser Ore Ls-Iii Under Gap-I, Em, Kmda.
BOQ
| Sl. No. | Item Description |
| 1 | Maintenance and overhauling of V.T. / inclined pumps as per manufacturers instruction manual with all tools, tackles etc. This job includes labour charges, consumables like O - ring, sundry cleaning material etc. This job includes dismantling of all sub-assemblies such as gear box, cooling pipes, bearing housing, stuffing box, discharge tee, muff couplings, shafts, column pipes, bowl assembly, bell mouth, strainer, line shaft enclosing tube etc. Reconditioning of all parts, inspection of all parts & replace these parts as per instructions (spares cost excluded) straightening of shafts & refitting of all parts & sub-assemblies with proper alignment including motor removing & refixing, test & trial for 24 hrs etc complete.Capacity up to 05 cusec pump |
| 2 | Cost of replacement of damaged line shaft / cleaning of jammed impeller of V.T./ inclined pumps as per manufacturers instruction manual with all tools, tackles, consumables such as gland packing etc. This job includes dismantling of pump assembly parts by parts and replacement of damaged parts, refitting of all parts & sub-assemblies with proper alignment including motor removing & refixing, test & trial for 24 hrs. etc. complete as per direction (spare cost excluded).Capacity upto 05 cusec pump |
| 3 | Maintenance and overhauling of C.I. non-return valve after dismantling it from delivery pipe line and checking part by part, cleaning, lubricating and thorough servicing the valve. This job includes labour charges, consumables like rubber gasket, sundry cleaning materials, lubricants & replace damaged parts as per instructions(spares cost excluded)&refitting of all parts with proper alignment as per direction |
| 4 | Maintenance and overhauling of isolating sluice valve after dismantling it from delivery pipe line and checking part by part, cleaning, lubricating and thorough servicing the valve. This job includes labour charges, consumables like rubber gasket, sundry cleaning material, lubricants & replace damaged parts as per instructions (spares cost excluded) & refitting of all parts with alignment. |
| 5 | Lowering, fitting and fixing of all types of valves in proper position and alignment using chain pully block or crane 250mm dia. |
| 6 | Taking out the L.T.sq.cage Induction Motor after disconnections of supply terminal connections including earthing terminal connection, from coupling end of 25/50 cusec vertical axial flow propeller pump after dismantling the same from the motor stool.The motor is to be kept on woodens leeper at a suitable distance from the floor without damaging the earthing strips and cables etc. as per direction of E.I.C |
| 7 | Preliminary checking of the whole motor (LT sq. cage IM) and testing of I.R. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar,double cage rotor end rings and all of motor bars and bar joints,housing of D.E.&NDE shield bearing housing etc. before work to detect fault. |
| 8 | Complete servicing and heat varnishing of 415Volt, 3 Phase L.T. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by Dr. Beck’s graded insulating varnish to obtain stable IR value,cleaning up the rotor,including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and RO priming on the end shield covers, bearing housing and complete .Upto 75 KW LT sq.cage IM |
| 9 | Refitting the pump motor(LT sq.cage IM)set with all its necessary coupling and accessories to its original position including fitting fixing with bearing housing non-reversable rachet unit and pump shaft with proper tolerance and clearance and reconnection of terminal points the overhauling work i.e. cleaning of contracts sliping etc.(all connection strips,cable end are to be refitted in proper way including good damages of strip terminals) and satisfactory 2 hours trial run of the pump as per direction of E.I.C. for all pumping stations. |
| 10 | Supply and delivery of Cotton Impregnated with lubricant- Hydraulic Gland Packing (Style-376), Thickness- 13 to 25mm, Make- Champion |
| 11 | Servicing and overhauling of 400 AMPS/ 500 AMPS/ 630 AMPS /1250 Amps ,11KV/ 6.6 KV. /3.3kv V.C.B./ V.C.U. dismantling the rack from the housing, opening the components, necessary cleaning of the component, carbonized portion, changing of rubber gasket, defective parts, cleaning of all mechanism parts and lubricating the mechanism, opening of C.T. & P.T.S., busbar spout assembly cleaning the same and insulated properly by supply of C.T.C. etc. and refitting all the parts to its original position by making all relevant electrical connection, panel wiring etc. for satisfactory & operation. |
| 12 | Supplying and fixing Sheet steel Main Switches on angle iron frame on wall 100/125A. (Make:-Havells) |
| 13 | Supply fitting Fixing of ss (AISI 304) bolts, nut & washer dia 10 mm to 20 mm , Length upto 75 mm |
| 14 | Supply and fixing of smart bright street light (70 Watt) complete with all accessories to be fixed/projected from the wall of the building or on pole incl.making holes/providing clamping arrangement & necy. GI reducer as required.S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. Make: Philips, 68 watt Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender