Tender For Supply, Installation, Testing and Commissioning Of 05 Hp Dewatering Pump Sets (04 Nos.) With Other Allied Works At Zafrabad Sps And Ghonda-Ii Sps.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Sep 2026
5 days left
EMD
16600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation, Testing and Commissioning Of 05 Hp Dewatering Pump Sets (04 Nos.) With Other Allied Works At Zafrabad Sps And Ghonda-Ii Sps.
BOQ
| Sl. No. | Item Description |
| 1 | Making of RCC foundation for 5 HP Pump Set as Cement concrete flooring 1:2:4 (1 cement: 2 coarse sands: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate for Monoblock as per site requirement. |
| 2 | Providing of 415 Volt, 50 Hz, Three Phase, Rated Capacity 5 HP electric motor driven Centrifugal Monoblock Pump sets for sewage operation with TEFC Induction Motor B Class Insulation.Having specification: - 1. Pump Size (Inlet * Outlet) – 60 to 100 mm 2. Head Range – 15-20 Meters (min.) 3. Discharge Range- 50 to 100 m3/h (min.) Make: Kirloskar/Crompton Greaves /DJB Approved |
| 3 | Providing and fixing of M.S. Base frame for Monoblock Pump sets including MS foundation bolt as per site requirement. |
| 4 | Providing of PVC Sheathed/ XLPE power cable of 1.1 KV grade of size 06 sq.mm X 03 core copper armoured cable. Make- Gloster/Grandlay/ Havells /DJB approved. |
| 5 | Providing/Fixing of CIDF swing type non-return valve as per IS5312 (Part 1 & 2), PN-1.0, size 80 mm, Make : Kirloskar/IVC/DJB Approved Make |
| 6 | Providing/Fixing of CI foot Valve 80 mm, Make: Kirloskar/IVC/DJB Approved Make |
| 7 | Providing of MS pipe 80 mm dia, ‘B’ class as per IS: 1239, Make:-Jindal/Tata/DJB Approved |
| 8 | Providing of MS flange 80 mm of Medium Class. ISI Mark. |
| 9 | Providing of MS flange of 65 mm of Medium Class. ISI Mark. |
| 10 | Providing/Fabricating of MS Reducer, Size 80 MM to 65 MM, Medium Class Conforming to IS-1239 |
| 11 | Providing/Fabricating of MS Bend, Size 80 MM, Medium Class Conforming to IS-1239. |
| 12 | Providing of nut and bolt with washers of suitable Size of good quality as per size requirement. |
| 13 | Providing of Rubber insertion sheet 50% Neoprene synthetic. Make: Jyoti/DJB Approved. |
| 14 | Supply of push button type three phase, 415 V, 50 Hz, 5 HP DOL starter panel having main MCCB/MCB- 3P totally enclosed floor/wall mounted type, dust & vermin proof outward opening, lockable door having the component i.e. RYB Led, Ammeter, voltmeter, selector switch, start/stop push button, 3P contactor with NO + NC and auxiliary contractor including overload relay, motor protection relay (according to motor rated power) |
| 15 | Supply of Insulating Rubber Mats for Floor for Safety Purpose Size- 2 mtr*1 mtr*10 mm Black/Red/Blue Plain Chequered confirming to IS 5424:1969. |
| 16 | Painting all pipes, MS Frame, accessories etc with two coats of primer and enamel paint each at site as per colour code approved by DJB for the work as mentioned as per satisfaction of Engineer -In Charge |
| 17 | Installation of pump sets with fixing / assembling of above accessories (All E&M Equipment) by the required logistic and manual labours along with all safety measures/ Equipments etc. and required civil work of breaking the wall for pipe laying and repairing the same after execution of work if required. |
| 18 | Testing and Commissioning of the complete pump set according to No load & On Load testing at sites as per satisfaction of engineer in charge complete in all respect making all electric connections properly. The job includes To & fro, loading and unloading charges at the sites. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender