Tender For Provn Of Water Supply Distr Line From Fire Fighting (Booster) Pump House To All Swt Tks At Cod Inside New Loc Under Ge (I) Kanpur
Tender Value
43.37 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
3 days left
EMD
86800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Water Supply Distr Line From Fire Fighting (Booster) Pump House To All Swt Tks At Cod Inside New Loc Under Ge (I) Kanpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE(I) Kanpur Name of Work : PROVN OF WATER SUPPLY DISTR LINE FROM FIRE FIGHTING (BOOSTER) PUMP HOUSE TO ALL SWT TKS AT COD INSIDE NEW LOC UNDER GE (I) KANPUR Contract No : GE(I)/KAN/T-91 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Items/Works Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Supply laying and testing 3 layer PP-R polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water, including all PP-R Plain & brass threaded polypropylene random fitting of size 50 mm all as specified and directed. Note Excavation an earth work shall be paid separately. |
| 3 | All as per item No 1 above but of size 63 mm (outer diameter of pipe) complete all as specified and directed. |
| 4 | All as per item No 1 above but of size 75 mm (outer diameter of pipe) complete all as specified and directed. |
| 5 | All as per item No 1 above but of size 90 mm (outer diameter of pipe) complete all as specified and directed. |
| 6 | All as per item No 1 above but of size 110 mm (outer diameter of pipe) complete all as specified and directed. |
| 7 | All as per item No 1 above but of size 160 mm (outer diameter of pipe) complete all as specified and directed. |
| 8 | Supply & fixing PP-R gate Valves (brass inserted) suitable for PPR pipe line of size 50 mm complete all as specified and directed. |
| 9 | Excavation in tranches in soft loose soil not exceeding 1.5mtr wide and not exceeding 1.5 mtr in depth for laying of pipes in tranches and getting out including levelling of bottom surface and trimming of sides after removal of existing GI/HDPE pipes and fittings complted all as specified and directed. |
| 10 | Returning filling including spearing levelling, waering and well ramming in layers not exceeding 25 cm thick each excavated soft/hard soil in trenches after the pipes havew been laid and tested competed all as specified and directed. |
| 11 | Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 12 | M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping, filling and mass concrete complete as specified and directed. |
| 13 | S&F of cast iron double flanged sluice valve of size 200 mm bore class PN 1.6 confirming to IS 14846/2000 with with high tensile stainless steel spindle with CI wheel, Gun Metal Nuts/rings 'I' bolt, ISI marked including replacement of rubber packing complete all as specified and directed. Make : Kirloskar/Upadhyay/BIR |
| 14 | Supply installing, testing and commissioning electric driven centrifugal monoblock pumping set of capacity not less then 20 HP of discharge 49 to 21 LPS at 16 to 28 meter head factory assembled comprising of horizontal split casing pump CI body with Impellers, Efficiency 90.00%, suction 125 mm, delivery 125 mm, mounted on common MS base plate including PCC foundation 1:2:4 as per manufacturer's recommendation with MS bolt, Nuts & anti vibration pads complete all as specified and directed.Note:- Foundation drawing to be submitted by contractor approved by manufacturer before commencement of work for approval from EIC. |
| 15 | S&F PVC insulated flat copper submersible cable heavy duty 16 sqmm 3 core, 1100 volts grade complete all as specified and directed. |
| 16 | Supply and Lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100V grade with stranded aluminium conductor of size 95 Sqmm 3.5 core complete all as specified and directed. |
| 17 | Supply, install, testing and commissioning LT cubical Panel of outdoor type factory made dust/vermin proof made out of CRCA sheet 3.15 mm thick CPRI approved duly powder coated having opening and locking arrangement both in front and rear side(independent door for each item on front side) mounted on 4 Nos angle iron 50x50x6 mm, 90 cm long embedded in PCC 1:3:6 type C2 complete with aluminium bus bar of rating 1.5 times of incomer MCCB rated capacity, IP 65 protection, provision of holes at the bottom of panel to pass through cable with cable gland for incomming and outgoing cables with lugs and connections, sealed completely to avoid forgin particals entry into the panel,etc required nuts ,bolts and washer incl provision of lugs for cable termination of 95 sqmm cable in MCCBs 100 amps & control wiring with suitable size PVC copper conductor cable etc. Including provision of following accessories/eqpt incl cable gland etc and suitable for fixing of under mentioned items:- |
| 18 | Incoming Main LT Panel Booster pump house(a) MCCB Adjustable thermal and fixed magnetic 4Pole 100 A 16 KA -No.01 (b) On-load Change over switch 100 amps 4 pole 415 v (c) Digital Voltmeter 0 to 500 Volt -01 No(d) Digital Ammeter 0 to 400 Amps with CTs and selector switch - 01 set(e) LED Phase Indication lamp (RYB) -01 Set(f) Cable Gland double compression type for 95 Sqmm 3.5 core 01 Nos Outgoing(a) MCCB Adjustable thermal and fixed magnetic 3Pole 100 A 16 KA -No.02(b) Star delta starter 20 HP X 02(c) Cable Gland double compression type for 16 Sqmm 3 coresubmersible cable |
| 19 | M&L for earthing in replacement/renewal with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised strip of size 25 x 4 mm earth continuity conductor by means of bolts, uts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR-I 2009, connected to main switch board. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20 mm dia GI pipe medium grade, funnel with wire mesh and lugs, complete all as specified and directed. |
| 20 | Construction of fly ash brick masonry valve pit chamber of size 950 mm X 950 mm X 950 mm (internal dimensions) including necessary excavation & earth work, 100 mm thick PCC (1:4:8) type D-2 as in foundation, 230 mm thick fly ash brick work in cement mortar (1:4), 12 mm thick rendering in cement mortar (1:4) on internal surface of valve pit and mild steel sheet cover of 6 mm thick and angle iron of size (50 x 50 x 6) mm frame around of valve pit, sheet welded on all four corners, locking arrangement with pad lock of size 50 mm brass, 6 levers and in duplicate key (Make - Godrej or equivalent make as approved by GE complete) including two coat of approved synthetic enamel paint over one coat of red oxide primer on prepared steel surface complete all as specified and directed and old retrieved MS frame and MS sheet shall be deposited to MES sore yard. |
| 21 | M&L for MS angle iron/Channel support for motor/pump incl nut bolt etc incl painting and making good all disturbed surfaces with PCC 1:2:4 complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender