Tender For Repair To Miscellaneous B/R Works In Nces And Civ Qtrs At Af Stn Ad Ur
Tender Value
40 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
4 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Miscellaneous B/R Works In Nces And Civ Qtrs At Af Stn Ad Ur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Sep-2026 | Revised BOQ | BOQ | 30-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level), etc complete all as specified and directed. |
| 2 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) of any description and in any position (for sunken) not otherwise specifically provided for, etc complete all as specified and directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, etc complete all as specified and directed. |
| 5 | Demolition of reinforced cement concrete as in chimney, Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and directed. |
| 6 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and directed. |
| 7 | Taking down, Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame),etc complete all as specified and directed. |
| 8 | Taking down shutter of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each and removing from site complete all as specified and directed. |
| 9 | Taking down shutter for , easing, adjusting of old wooden shutters of any description exc. 1 Sq,m and not exc. 2 Sq.m each and refixing in same opening after tiling work complete all as specified and directed. |
| 10 | Dismantling water tanks exc 500 & not exc. 1000 and removing to store,etc completed all as spd and directed. |
| 11 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 12 | M&L for brickwork in cement mortor (1:6) with flyash bricks, straight or curved on plan exc 6m mean radius built in etc complete all as specified and as directed. |
| 13 | M&L for cement concrete type B-0 1:2:4 (12.5 mm granded stone aggregates) in coping, fixing cooler stand as required etc complete all as specified and as directed |
| 14 | M&L for cement concrete (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 15 | M&L for RCC 1:2:4 type B-1 (Using 20 mm graded stone aggregate)as in chajjas / cooking shelves/platform etc. and the like including 5 mm thick rendering in CM of 1:3 finished even and smooth without using extra cement to the surface in contact complete all as specified and as directed.(The rate quoted by contractor shall include formwork ) |
| 16 | S&F Factory made PVC cupboard shutter flush type of 18-22 mm thickness consisting of panel of hollow PVC profile of 12mm X 12 mm inserted all around the hollow profile section and insert ine 10mm X 10mm MS tube in the centre of this section and lipped with 10mm (5mmX2) thick and 12 mm wide on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardent printed PVC sheet using solvent cement on both the sides of the panel, The front side of the panel visible in the front of the shutter to be edge bonded using 20mmX1mm thick PVC leeping on both the edges with locking arrangement of both panels etc complete all as specified and directed. |
| 17 | S&F Factort made PVC shelf of 18-22 mm thickness consisting of panel of hollow PVC profile of 12 mm thickness consisiting of MS frame made out of M S tubes of 19 Gauge thickness and size of 12mmX12mm inserted all around the hollow profile section and insert one 12mmX12mm M S tube in the centre of this section and lipped with 10mm(5mmX2) thick and 12mm wide on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof water proof and fire retardent plan PVC sheet using solvent cement on both the sides of panel. The front side of the partition visible in the front to br edge bonded using 20mm X 1mm thick plain PVC leeping on both edges etc complete all as specified. |
| 18 | M&L for Roughning surfaces of old concrete floor by picking ,sweeping clean and washing down with water to remove dust etc including brushing neat cement slurry with 3 kg of cement per sqm |
| 19 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 20 | S&F including taking down Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe-410- W (Gde E-250) Grade A complete all as specified and as directed.Note :- This item includes fixing of cooler stands upto First floor level necessary Scaffolding is included in this item. Nothing extra will be paid to the contractor. |
| 21 | M&L for Cutting holes in brick walls exceeding half brick but not exceeding one brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4, including removal of rubbish outside MoD land, complete all as specified and as directed. |
| 22 | S&F Steel windows made of MS sheet 1.25 mm thick box type (primer coated) ERW hollow ‘P’ section of size 60 mm x 25 mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1 mm thick & openable leaf consisting two Nos sash bars of ‘T’ section 20 x 3 mm complete welded to frame including cutting holes & making good dismantled portion in PCC 1:2: 4 type B1 four Nos for each window including following fitting welded to shutter ;- (a) Hold fast 150 mm long 12 mm x 3 mm made to shape -04 Nos(b) Handle of ‘Z’ section 20 x 25 mm , 100 mm long 01 Nos each leaf.(c) MS tower bolt 150 mm long 02 Nos each leaf.(d) ‘Z’ section 20 x 25 mm , 100 mm stopper-01 Nos each leaf.(e) Cleat 55 mm long of hollow square 15 x 20 x 63 mm welded to hinges-01 Nos per leaf.(f) MS box type hinges of size 75 x 12 mm -02 Nos per leaf.(g) Fabrication & fixing complete. |
| 23 | All as per item no. 22 above here-in-before but without sash bars complete all as specified and directed. |
| 24 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed by Engineer-In- Charge. |
| 25 | S&F 30mm wide flaps continuous (Piano) hinges mild steel bright finish complete all as specified and directed by Engineer-In- Charge. |
| 26 | M&L for repairing of RCC projection chhajjas, roof, facia etc by necessary preparation. Scraping cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC with cement concrete (1:1.5:3) using 20mm graded stone aggt and reinforcement with welded mesh of weight 2 Kg per Sqm but n.exc 3 Kg per Sqm (if reqd) with or without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n.exc 5 Sqm and thickness of RCC member n.exc 70mm incl necessary formwork and applying two coats of finishes to match with the existing surfaces at any height complete all as specified and as directed by Engr-in-Charge. (The rate quoted by the contractor shall included for welded mesh, scaffolding and necessary formwork upto triple storey bldg). |
| 27 | S&F Factory made PVC solid single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR part-II 2004 Section-8, clause 8B.3 to 8B.3.2 and shown on drawing in SSR complete all as specified and directed. |
| 28 | S&F factory made solid PVC frame of size 75 mm x 40 mm made out of 5 mm thick wood grain colour PVC sheet reinforced with mild steel square tube supplying and fixing in opening complete all as specified and directed. |
| 29 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and a gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site all as specified in SSR complete all as specified and directed. |
| 30 | S&F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC (1:3 :6) type C-0, using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed. |
| 31 | S&F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC (1:3 :6) , type C-0 ,using 12.5 mm graded crushed stone aggregate for filling back of chowkhats complete all as specified and as directed. |
| 32 | S&F flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm ,etc complete all as specified and directed. |
| 33 | S&F 35 mm, 2nd class hard wood factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all as specified and directed. |
| 34 | S&F 250mm long mild steel ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and directed. |
| 35 | S&F in repairs floor door stopper of aluminium alloy body 140 mm cover plate and tongue , anodized with hard drawn steel spring fixed complete all as specified and directed.. |
| 36 | S&F 100mm size hasp and staple safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.. |
| 37 | S&F 75mm Aluminium handles, cast type, anodised complete all as specified and directed. |
| 38 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.. |
| 39 | S&F sheet glass of ordinary quantity 4 mm thick and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 40 | S&F 500 ltrs rotational moulded polyethylene water storage tanks (cylindrical verical with closed top) hoisted and fixed in position including ball valve of 20 mm dia complete all as specifed and directed. |
| 41 | M&L for 75 mm thick, Cement concrete type D-2, 1:4:8 (40mm graded aggregate), etc as in sub floors complete all as specified. |
| 42 | M&L for Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved design & pattern as in footpath , parks , lawns,drive ways or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required pattern over and including 25 mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling joints with sand andcutting of paver block as per required size and pattern,finishing and sweeping extra sand complete all as specified and directed. |
| 43 | S&F 75 mm size butt hinges, medium weight, cold rolled, mild steel complete all as specified and directed. |
| 44 | S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. |
| 45 | S&F 250 mm long MS sliding door bolt, plate type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 46 | S&F 125 mm size, aluminium anodized handles, cast type complete all as specified and directed. |
| 47 | M&L for rendering 15 mm thick on fair faces of brick wall or concrete surfaces finished fair & even in CM 1:6 complete all as specified and directed. |
| 48 | M&L for 15mm thick rendering in CM (1:3) using WPC as per manufacturer instructions as in sunken portion complete all as specified and directed. |
| 49 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished fair & even in CM 1:4 mixed with water proofing compound as per manufacturer instructions complete all as specified and directed.Note:- water proofing compound shall be measured and paid seperately |
| 50 | M&L for rendering 5 mm thick on brick or concrete surface of ceiling finished fair & even in CM 1:3 complete all as specified and directed. |
| 51 | Supply only integral water proofing compound complete all as specified and directed. |
| 52 | M&L for preparation of newly plastered surfaces of ceiling and applying two coats of OBD on ceiling, complete all as specified and directed. |
| 53 | M&L for preparation of old plastered surfaces of ceiling and applying one coat of OBD, complete all as specified and directed. |
| 54 | M&L for Preparation of new plastered wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty upto 2mm thick as required on wall surfaces, (preparatory to paint as directed), complete all as specified. (b) Priming plastered or unplastered surfaces of walls with alkali resistant priming paint, complete all as specified.(c) Two coats exterior acrylic emulsion paint white or coloured on wall surfaces |
| 55 | M&L preparation of newly plastered surfaces of wall and applying two coats of OBD over a coat of putty filling including preparation of surfaces on walls as specified and directed . |
| 56 | M&L preparation of old plastered surfaces of wall and applying two coats of OBD including preparation of surfaces on walls as specified and directed . |
| 57 | M&L for Complete removal of existing treatment from brick walls or concrete surfaces including scraping down smoke spots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or un plastered surfaces) & by removing existing paint by scrapping down mechanical vacuum mechanism having RPM between 600-1500 , sanding paper of 60/80 grit having dia of 7\\"/9\\" to make the surface free from dust , loose paint etc. by skilled labour applying two coats of exterior emulsion paint (Apex) including wall care putty 2mm thick over a coat of alkali resistant paint complete all as specified and directed. |
| 58 | M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed. |
| 59 | M&L for preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.. |
| 60 | M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamelled paint including preparation complete all as specified and directed. |
| 61 | M&L for preparation of old painted wooden surface and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 62 | M&L for Granite of any type work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including 20mm thick screed bed in CM (1:6) for laying of Granite slab & pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 63 | M&L for 75 mm thick, plain cement concrete (1:3:6), type C-2, (using 40 mm graded crushed stone aggregates), laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified and as directed.Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm. |
| 64 | M&L for coloured Glazed ceramic tiles in vertical surface exc. 0.13 Sqm but n. exc 0.19 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match including Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat complete all as specified and directed. |
| 65 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 complete all as specified and directed. |
| 66 | M & L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 etc complete all as specified and directed. |
| 67 | All as per item No. 66 above but in Dado/Skirting including rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat. & including taking down plaster complete all as specified and directed. |
| 68 | M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base floor complete all as specified and directed. |
| 69 | M&L for machine cut kota stone slab flooring 20-25 mm thick over screed bed or bedding layer 20 mm thick in CM (1:6), and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing complete all as specified and directed |
| 70 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 13014 including backing coat 10mm thick in CM (1:4) complete all as specified and directed |
| 71 | S&F GI tubes 15mm dia medium grade with all fitting and fixed complete to walls, ceilings or laid in floors including taking down complete all as specified and directed. |
| 72 | S&F GI tubes 20 mm bore dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, including taking down complete all as specified and directed. |
| 73 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 74 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooling ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 75 | S&F in repairs vitreous china WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and cement concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed. |
| 76 | S&F in repair Vitreous china wash down water closet pan, pedestal pattern (EWC) white, including seat cover , fixing bolts connection to trap & to flush pipe complete all as specified and directed |
| 77 | S&F in repairs PVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed. |
| 78 | S&F in repair Vitreous China wash basin, white, flat back, size 550x400 mm aps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 79 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 80 | S&F in repairs steel plate rack made of stainless steel 1.0 mm thick over all size 600 X 750 mm complete all as specified and directed. |
| 81 | S&F in repair 600 mmx450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC buildg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 82 | S&F in repairs concealed stop cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. |
| 83 | S&F in repairs stop cock/angle cock with long shank cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. |
| 84 | S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed. |
| 85 | S&F in repair Pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 86 | S&F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and directed. |
| 87 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm, complete all as specified and directed. |
| 88 | S&F in repair grating doom 75/100mm dia size with stainless steel with/ without hole complete all as specified and directed. |
| 89 | S&F in repairs Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. |
| 90 | S&F in repair sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long in repair, completed all as specified and directed. |
| 91 | S&F in repair corner glass shelf 5.0 mm thick 9\\" wide, fixed with suitable mild steel CP brackets, nuts and bolts in repair, completed all as specified and directed. |
| 92 | S&F in repair stainless steel soap dish, complete all as specified and as directed. |
| 93 | M&L for applying evenly a tack coat of industrial bituminous 85/25 @ 1.20 Kg per square mtr including cleaning surfaces complete all as specified and directed. |
| 94 | M&L for LDPE sheet 150 micron laid over a coat of industrial bitumen , complete all as specified and directed. |
| 95 | S&F, 50mm bore dia GI pipe, medium grade, as in spout for sunken floor, fixed as in wall, inside end fixed with wire netting & external bevelled edge at 45 degree, complete all as specified and as directed |
| 96 | S&F in repair 75mm dia PVC floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4 ) complete all as specified and directed. |
| 97 | S&F in repair 75 mm dia PVC (SWR) pipes single socketed, in any length with or without rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 98 | S&F in repair for 110 mm dia PVC (SWR) pipes single socketed, in any length with or without rubber ring joints, fixed to walls, complete all as specified and directed. |
| 99 | S&F in repair PVC (SWR) bends any radius, bore of pipe in 75 mm, complete all as specified and directed. |
| 100 | S&F in repair PVC (SWR) bends any radius, bore of pipe in 110 mm, complete all as specified and directed. |
| 101 | Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 18, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender