Tender For Maintenance And Miscellaneous Works At Waste Management Facility Areas (Wmcf) And Solid Waste Management Facility (Swmf) At Plant Site, Kaiga.
Tender Value
93.53 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
2 days left
EMD
1.87 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Uttara Kannada → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance And Miscellaneous Works At Waste Management Facility Areas (Wmcf) And Solid Waste Management Facility (Swmf) At Plant Site, Kaiga.
BOQ
| Sl. No. | Item Description |
| 1 | PART - A (CIVIL WORKS)Earthwork Excavation in all Sorts of Soil for foundation trenches, walls, drains, plinths, footings, pedestals, colunmns and for all other miscellaneous foundation works etc., including Cutting / removing & clearance of jungle, bushes, grass & all other unwanted plants, creepers, which are obstructing for excavation work etc. Shoring, strutting, bailing out water if necessary, dressing, leveling & hand ramming properly the bottom of foundations using wooden hand rammer with proper watering, refilling the sides of the foundation with excavated available good quality of Soil, leveling & hand ramming properly the sides of foundations using wooden hand rammer with proper watering, providing; fixing & removing necessary scaffolding / staging / platform, cleaning the work area, collecting & disposing the costruction waste up to a lead of 2000 meters from the place of work etc. complete all as per specification and as directed by Engineer-In-Charge at all locations and at all lift & height. |
| 2 | PART - A (CIVIL WORKS) Excavation from Ground level to 1.50 meters depth. |
| 3 | PART - A (CIVIL WORKS) Excavation from 1.50 to 3.00 meters depth. |
| 4 | PART - A (CIVIL WORKS)Providing and laying PCC 1:3:6 using 40 mm & downsize, clean, crushed, well graded, aggregates of hard, durable & approved quality for foundation, plinth works including preparation of base by close hacking / chipping the old concrete / plastered surface, racking out the joints & cleaning, mixing, transporting, laying, spreading, consolidation, levelling, finishing, curing, providing; fixing & removing necessary formwork, providing, fixing & removing staging / platform / ladder, collecting & disposing the generated waste, costruction waste up to a lead of 2000 meters from the place of work & leaning the work area, etc. complete all as per standard technical specification, drawing [if any] and as directed by Engineer-in-charge at all locations and at all lift / height.NOTE: OPC 43 grade cement shall be used. |
| 5 | PART - A (CIVIL WORKS)Providing and laying PCC 1:2:4 for 20 mm & down size hard stone aggregates. The Copiong Concrete shall be 50 mm thick [minimum] & projected on both the sides by 10 mm thick (minimum), 6 mm thick Plastering in CM 1:3 including preparation of base by close hacking / chipping the old concrete / plastered surface, racking out the joints & cleaning, mixing, transporting, laying, spreading, consolidation, levelling, finishing, curing, providing; fixing & removing necessary formwork, providing, fixing & removing staging / platform / ladder, collecting & disposing the generated waste, costruction waste up to a lead of 2000 meters from the place of work & leaning the work area, etc. complete all as per standard technical specification, drawing [if any] and as directed by engineer-in-charge at all locations and at all lift / height.NOTE: OPC 43 grade cement shall be used. |
| 6 | PART - A (CIVIL WORKS)Providing & Constructing R. R. Masonry using Stone Boulders, Stone chips, Through / bond Stones [as per standard techncal specification, through / bond Stones shall be be used in RR masonry work], in CM 1:5 for foundation & plinth and other miscellaneous RR masonry works of foundation & plinth, masonry work shall be carried out as per relavent BIS specification of latest edition, including simultaneous flush pointing, preparation of base by close hacking / chipping the old concrete & plasterd surfaces, racking out the masonry joints & cleaning, providing; fixing & removing necessary staging / platform, ladder, collecting & disposing the generated waste, up to a lead of 2000 mtrs. from the place of work & cleaning the work area, etc. complete all as per standard technical specification, drawing [if any] and as directed by Engineer-in-charge at all locations & lifts / heights. |
| 7 | PART - A (CIVIL WORKS)Strengthening of existing R.R.Masonry/Drains using Stone chips in CM 1:5 for Foundation & Plinth, and including simultaneous flush pointing providing; fixing & removing necessary staging / platform, preparation of base & curing properly, Stacking of debris upto lead of 2000 mtrs. etc. complete all as per specification and as directed by the Engineer-in-charge at all locations. |
| 8 | PART - A (CIVIL WORKS)Providing, placing and removing formwork for all In-Situ Concrete Works such as foundation, raft, columns, beams, slab, footings, all other miscellaneous RCC works including providing; fixing & removing necessary staging / platform / ladder, preparation of base, collecting & disposing the generated waste, costruction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard technical specification, drawing [if any] and as directed by engineer-in-charge at all locations and at all lift / height. Note: The measurement for the form work will be actual area of form in contact with the concrete surfaces. |
| 9 | PART - A (CIVIL WORKS)Providing and laying approved make high yeild strength deformed Reinforcement bars of all dia meters confirming to grade Fe -550/550D of IS:1786 [latest edition] including cutting, bending, transporting, placing in position & binding with suitable guage soft annealed binding wire for all insitu concrete works and all other miscellaneous RCC works, providing & placing spacer bars, cover blocks [cover blocks shall be cast in same grade of concrete & cured properly], providing; fixing & removing necessary staging / platform / ladder, preparation of base, collecting & disposing the generated waste, costruction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification, drawing [if any] and as directed by Engineer-in-charge at all locations and at all lift / height. Note: The rate shall be inclusive of Binding wire and cover blocks and will not be measured separately for payment. |
| 10 | PART - A (CIVIL WORKS)Providing and laying RCC M30 using 20 mm & downsize clean, crushed, well graded, aggregates of hard, durable & approved quality for foundation, rafts, footings, plinth, columns, beams, slabs, Chejjas, Lintels & for all insitu concrete works including preparation of base by close hacking / chipping the old concrete / plastered surface, racking out the joints & cleaning, mixing, transporting, laying, spreading, consolidation, levelling, finishing, curing, providing; fixing & removing necessary providing, fixing & removing staging / platform / ladder, collecting & disposing the generated waste, costruction waste up to a lead of 2000 meters from the place of work & leaning the work area, etc. complete all as per standard technical specification, drawing [if any] and as directed by Engineer-in-charge at all locations and at all lift / height. NOTE: OPC 43 grade cement shall be used. |
| 11 | PART - A (CIVIL WORKS)Providing and laying 230 mm thick Stone Soling below floor & foundations bed etc. using hard, durable & approved quality stones, rubbles, filling interstices using small size stones, stone chips, murum & watering [to fill uip all gaps] etc. including preparation of base properly, levelling, dressing & hand ramming, providing; fixing & removing necessary staging / platform / ladder, collecting & disposing the generated waste, costruction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard technical specification, drawing [if any] and as directed by engineer-in-charge at all locations and at all lift / height. |
| 12 | PART - A (CIVIL WORKS)Removing by chisteling / hammering / breaking of Burnt Bricks /CC Block Masonry/RR masonry work by Manual/Mechanical means with both side plaster, concrete, in cement mortar & other finishes if any etc. including collecting, shifting, loading, carriage,unloading & stacking the serviceable materials in Civil Sectional Store at Kaiga, cleaning the work area and disposing the debris etc., upto a lead of 2000 meters outside work premises etc. complete all as per specification and as directed by the Engineer-in-charge at all locations and at all heights/ lifts. |
| 13 | PART - A (CIVIL WORKS)Dismantling / breaking / removing by Manual or Mechanical means PCC of all grades with both side plaster, in cement mortar & other finishes [if any] for formation of trenches & other miscellaneous works including collecting & stacking neately; all serviceable materials [such as aggregates & reinforcement steel etc.] in sectional store at Kaiga Site, providing; fixing & removing necessary staging / platform [if required], collecting & disposing the generated & costruction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard technical specification and as directed by Engineer-in-charge at all locations and at all lift. |
| 14 | PART - A (CIVIL WORKS)Dismantling & removing flexible pavement bitumin courses including WBM/WMM, soling & pavers etc.by manual/mechanical means at road & drain crossing / drains wall for formation of trunches 7 for other miscellaneous works using suitable tools & tackles & tackles including depositing the all removed serviceable materials in sectional store at kaiga Site, providing; fixing & removing necessary staging/ platform [if required],collecting 7 disposing the generated & construction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard technical specification and as directed by Engineer-in-charge at all locations and at all lift. |
| 15 | PART - A (CIVIL WORKS)Removing by chisteling / hammering / breaking of Floor & Dado tiles [thickness of tiles 10 mm. to 25 mm.], wall plaster and other finishes if any etc. including collecting, lowering / shifting, loading, carriage, unloading & stacking the serviceable materials [such as tiles] in Sectional Store at Plant site, stacking debris up to 2000 mtrs. distance. providing; fixing & removing staging / platform, etc. complete all as per specification and as directed by the Engineer-in-charge at all locations and at all heights/ lifts. |
| 16 | PART - A (CIVIL WORKS)Providing & Constructing Masonry with approved C. C. Solid Blocks of size 400 X 200 X 200 mm or 300 X 200 X 200 mm, having crushing strength not less than 45Kgs/cm2 and confirming to the BIS 2185 part-I of the latest edition, in CM 1:5 for foundation [plinth, drains, walls & repair works etc.] & superstructure [walls & repair works etc.] and all other miscellaneous masonry works for foundation & superstructure etc. Including simultaneous flush pointing, preparation of base by close hacking / chipping the old concrete / plastered surface, racking out the joints & cleaning, providing; fixing & removing necessary staging / platform / ladder, Curing, cleaning the work area, collecting & disposing the generated waste, costruction waste up to a lead of 2000meters from the place of work & cleaning the work area, etc. complete all as per standard technical specification, drawing [if any] and as directed by engineer-in-charge at all locations and at all lift / height. |
| 17 | PART - A (CIVIL WORKS)Providing and laying Internal Cement Plaster 15 mm. thick in CM 1:4 to the Masonry & concrete surfaces etc., rubbed perfectly so as to obtain smooth & even finish including curing & preparation of base properly, providing; fixing & removing necessary staging / platform, Stacking of debris upto lead of 2000 meters etc., complete all as per specification and as directed by the Engineer-in-charge at all locations and at all lifts / heights. |
| 18 | PART - A (CIVIL WORKS)Providing and laying External Cement Plaster 18 mm thick in Two Coats. Base coat shall be 12 mm thick in CM 1:5 & finishing coat shall be 6 mm thick in CM 1:3 (sponge finished) with Non-Shrink Water Proofing Compound [confirning to the BIS 2645 of the latest edition] @ 2 % by the weight of cement / as per the recommendation of the manufacturer to the Masonry surfaces & concrete surfaces etc. rubbed perfectly so as to obtain smooth & even finish including preparation of base by racking out all the masonry joints & close hacking the concrete surfaces for proper bonding, curing, providing; fixing & removing necessary scaffolding / staging / platform, cleaning the work area, collecting & disposing the costruction waste up to a lead of 2000 meters from the place of work etc. complete all as per specification and as directed by Engineer-In-Charge at all locations and at all lift & height. |
| 19 | PART - A (CIVIL WORKS)Providing and fixing suitable plaster mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls , plastered surface etc.,including cost of materials, labour for fixing complete as per specifications. |
| 20 | PART - A (CIVIL WORKS)Providing and laying Premium grade / 1st quality Vitrified Tiles of size 600 X 600/800 X 800 mm or of size as selected by Engineer-in-charge, of standard make, shade / colour [as per site requirement & as directed by engineer-in-charge] & thickness of tile shall be 9-10 mm, Tiles shall be confirming relavent BIS of latest edition, flooring with 20 mm thick in CM 1:4 [bedding] & Skirting with 12 mm thick in CM 1:3 [backing] Or using approved Adhesive [for Flooring & Skirting] pasting the Vitrified tiles on concrete or on masonry or on plastered surfaces, cement slurry shall be used @ 3.3 Kgs / Sqm. of area, close jointed [with or without spacers] as directed, grout filling in the joints with matching pigmented cement slurry, finished to true line & levels / slope / plumb etc., including cutting of tiles, recommended washing, preparation of base by close hacking / chipping the adjoining concrete / plastered surfaces, racking out the adjoining masonry joints & cleaning, curing,collecting & disposing the generated waste & costruction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification and as directed by engineer-in-charge at all locations and at all lift / height. Note: Contractor shall produce delivery challan & Tax Invoice during the execution of this contract. |
| 21 | PART - A (CIVIL WORKS)Providing and laying Glazed Ceramic Tiles of size & shade / colour [as per site requirement & as directed by engineer-in-charge, tiles shall of superior 1st quality, of standard make] & thickness of tile shall be 5 mm to 6 mm, for Skirting & Dado with 12 mm thick in CM 1:3 [backing] or using approved Adhesive [Skirting & Dado], pasting the glazed ceramic tiles on concrete or on masonry or on plastered surfaces, cement slurry shall be used @ 3.3 Kgs / Sqm. of area, close jointed [with or without spacers] as directed, grout filling in the joints with matching pigmented cement slurry, finished to true line & levels / slope / plumb etc., Tiles shall be confirming relavent BIS of latest edition, including cutting of tiles, recommended washing, preparation of base by close hacking / chipping the adjoining concrete / plastered surfaces, racking out the ajoining masonry joints & cleaning, curing, collecting & disposing the generated waste & costruction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification and as directed by engineer-in-charge at all locations and at all lift / height. |
| 22 | PART - A (CIVIL WORKS)Providing and laying 18 - 20 mm thick mirror polished, Granite Slab for Kitchen platform, landing slab, selves & flooring [for flooring in approved pattern] etc. over a bedding of 20 mm thick in CM 1:4 using superior 1st quality, colour / shade [as per site requirement & and as directed by engineer-in-charge], granite stones shall be closely jointed as directed, grout filling in the joints with matching pigmented cement slurry [for joints & flooring @ 6.40 Kgs. per Sqm. of floor area], mirror polished the joints, finished to true line & levels / slope / plumb etc., including preparation of base by close hacking / roughening of existing base, racking out all the adjoining masonry joints & washing the base, curing, providing; fixing & removing necessary staging / platform [if required], collecting & disposing the generated waste & construction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard technical specification and as directed by engineer-in-charge at all locations and at all lift / height. |
| 23 | PART - A (CIVIL WORKS)Moulding [as directed] the Corners & Edges of Granite Slab [already provideed under item No.: 20 above] including required tools & tackles and labour charge, providing; fixing & removing necessary staging / platform / ladder, collecting & disposing the generated waste, up to a lead of 2000 mtrs. from the place of work & cleaning the work area, etc. complete all as per standard technical specification, drawing [if any], as per site requirement and as directed by engineer-in-charge at all locations & lifts / heights. |
| 24 | PART - A (CIVIL WORKS)Providing and laying Premium grade / quality Anti-Skid Vitrified Tiles for floor, of approved brand ,size & shade / colour [as per site requirement & as directed by engineer-in-charge] Tiles shall be confirming relavent BIS of latest edition, flooring with 20 mm thick in CM 1:4 [bedding] Or using approved Adhesive pasting the tiles on concrete or on masonry or on plastered surfaces, cement slurry shall be used @ 3.3 Kgs / Sqm. of area, close jointed [with or without spacers] as directed, grout filling in the joints with matching pigmented cement slurry, finished to true line & levels / slope / plumb etc., including cutting of tiles, recommended washing, preparation of base by close hacking / chipping the adjoining concrete / plastered surfaces, racking out the adjoining masonry joints & cleaning, curing,collecting & disposing the generated waste & costruction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification and as directed by engineer-in-charge at all locations and at all lift / height. |
| 25 | PART - A (CIVIL WORKS)Providing, laying concrete & in position / Placing of RCC Pre-Cast drain Slabs / drain Covers made out of RCC 1:2:4 casting with slots / as directed by the Engineer-in-charge] of 75 mm. thickness including mixing, transporting, laying, spreading, consolidating, leveling, smooth finishing the all exposed faces, providing; fixing & removing necessary formwork curing properly, Providing and tying reinforcement Steel Bars for RCC pre-cast covers / slabs of approved quality [Fe-500 steel bars shall be confirming to the BIS 1786 - of the latest edition] sealing the joints in CM 1:2, Stacking of debris upto lead of 1000 mtrs. etc. complete all as per specification and as directed by the Engineer-in-charge at all locations. Note: 1] Providing and tying approved make reinforcement Steel will be measured & paid under Item No. 7. 2] Precast slabs cured properly & placed in position after 28 days from date of casting. |
| 26 | PART - A (CIVIL WORKS)Providing, fabricating and erecting Mild Steel Structural items [of various thickness & sizes] such as channels, angles, MS pipes, GI Pipes, flats, plates and other approved sections etc. & transporting to the work spot(s) / place(s) including loading, unloading, cutting, fabricating the MS gates, fencing posts & struts, hand rails, angle frames, cattle traps, purlins, rafters, columns, beams & all other miscellaneous new & modification [to the existing structural steel works] and fixing / erecting the same in position as directed, approved quality of Hilty Bolts / anchor bolts shall used [if required], rate shall be inclusive of all required consumables & miscellaneous materials / things, providing & painting one coat of approved Primer of Asian Paints / Berger Make and Two coats of first quality synthetic enamel paint of Asian Paints / Berger Make, of approved shade / colour, MS Steel, Primer, Paint & Other all required materials which are going to be used for this work shall be confirming to the relevant BIS specification of latest edition, preparation of base properly, colleting & stacking the construction waste / dead debris & unwanted materials / things up to a lead of 1000 meters from the place of work etc., complete all as per specification, as per manufacturer's specification and as directed by the Engineer-in-charge at all locations and at all lifts / heights |
| 27 | PART - A (CIVIL WORKS)Providing and laying / fixing 0.47 mm thick Galvalum sheet for cladding OR Roofing plain or curved with or without Galvalum Ridges of Colour Mat Finish Coating: AZ - 150 / 550 MPA, Paint : RMP (Regular Modified Polyester), Top Coat: 18 - 20 Micron, Bottom Coat: 5 - 7 Micron, Trapezoidal Profile 0.47 mm thick at pitch 250 mm., Width 1060 mm, Length as per site measurement, Aluminium - Zinc Steel Sheet (Galvalume Base) 55 % aluminium, 43 % Zinc, 1.60 % Silicon with Tensile strength of 345 to 550 MPA including providing & fixing necessary self drilling screws of best quality & EPDM washers, of approved shade / colour & shall be confirming to the relavent BIS specification of the latest edition and of approved make.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation, providing; fixing & removing Staging / platform, preparation of base, collecting & disposing the generated waste up to the lead of 2000 mtrs from work place and cleaning the work area etc., complete all as per standard technical specification, as per architectural drawings [if any], as per manufacturers standard technical specification and as directed by the engineer-in-charge at all locations & at all heights & lifts. |
| 28 | PART - A (CIVIL WORKS)Providing and installation at all floors, heights, levels and locations of Aluminium composite panel (ACP) cladding over aluminium tube frame structure including fixing of sheets and filling of joints with structural silicon to acquire a smooth ripple free finish without any undulations. The composite panel sheet shall be a double layer aluminum panel consisting of a anti-toxic polythene layer core compressed between the aluminium layers. One side of the panel shall be a fluorocarbon paint finish in silver colour (as approved) with resistance to fading on exposure in exterior conditions and with a protective film on top to be removed after total completion of cladding. The sheet shall be 3mm thk. of total flatness with no distortion or deflection. The sheets shall be corrosion resistant and not be affected by varying temperature variations and should resist thermal expansion. The sheets shall be fixed over aluminum framing system of tubing of size 1” x 1.5” evenly spaced at maximum 2’c/c to provide complete support to the sheets. The sheets shall be fixed to the framing system with double sided tape and duly anchored with maximum no. of screws All groves and finished edges. |
| 29 | PART - A (CIVIL WORKS)Providing and laying Anti Skid; Short Blasted [top surface] Multy Coloured Paver of 65 mm. thick [minimum] for Foot Paths, Path Ways, Platform, Passages, Parking Areas, Open Areas & Walk Ways etc., of approved shape / size and of approved shade / colour [as directed by the Engineer-in-charge], Multy Paver shall be of approved quality & of approved make. Multy Paver shall be laid over well Saturated 50 mm. thick River Sand bedding including preparation of base by proper dressing / leveling and ramming the base with proper watering using Plate Vibrator to have uniform surface and to get the required line & level / gradient, camber and the gaps shall be filled with fine sand, Stacking of debris upto lead of 1000 mtrs. etc., complete all as per specification and as directed by the Engineer-in-charge at all locations. |
| 30 | PART - A (CIVIL WORKS)Providing and fixing powder coated Colour Anodized Aluminum Work for frame works of Partitions, Shutters [Door; Windows & Ventilators] with extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285 anodized transparent or dyed to required shade according to IS:1868 [minimum anodic coating of grade AC150], fixed with rawl plugs and screws or with fixing clips, or with expansion anchor fasteners including necessary filling up gaps at junctions at top, bottom and sides with required PVC / Neoprene felt etc. aluminum section shall be smooth, straight, mitered and jointed mechanically wherever required including cleat angle, aluminium slap beading for glazing / paneling, C.P. brass / stainless steel screws, etc. And also removing exsiting aluminium frame [windows Door& ventilators] and cleaning the work area, colleting & stacking the construction waste / dead debris & unwanted materials / things up to a lead of 1000 meters from the place of work etc., complete all as per specification and as directed by the Engineer-incharge at all location at all lifts / heights. |
| 31 | PART - A (CIVIL WORKS)Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as directed by Engineer-In-Charge.Frame size: Size 65mm x 100mm. |
| 32 | PART - A (CIVIL WORKS)Providing and fixing in position the factory made, 30 mm thick, Single / Double, Leaf Flush Door Shutter [of superior 1st quality, of standard make & Confirming to relavent BIS specification of latest edition] of boiled water proof solid core block board with 30 X 20 mm external teak wood lipping alround, bonded with phenol formaldehdye synthetic resin, hot pressed including preparation of base, providing & fixing [fittings such as] powder coated One number of 250 mm long & 16 mm dia Aldrop, One number of 200 mm long & 10 mm dia Tower Bolt; Two numbers of 125 mm grip ,'D' handles, One number of Door Stopper, One Number of Door Bush & One number of cylindrical seven lever lock [Aldrop, cylindrical seven lever lock, Tower Bolts, 'D' handles, Door Stopers & Door Bushes and each shutter shall be fixied with four numbers of 125 mm long MS oxidised hinges etc. shall be of of superior 1st quality, of standard make & Confirming to relavent BIS specification of latest edition, shade / colour of powder coating shall be as per site condition & as selected by engineer-in-charge], providing & applying 1 mm thick sunmica laminate with fevicol [sunmica & fevicoal shall be of superior 1st quality, of standard make & Confirming to relavent BIS specification of latest edition. Shade / colour shall be as per site requirement & as selected by engineer-in-charge] to the entire shutter, removing the existing (if any), providing; fixing & removing necessary staging / platform, collecting & disposing the generated waste & costruction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification and as directed by engineer-in-charge at all locations and at all lift / height.Note: Contractor shall produce delivery challan & Tax Invoice during the execution of this contract. |
| 33 | PART - A (CIVIL WORKS)Providing and fixing in position factory made, FRP , door shutters made out of fiber glass reinforced plastic sheets having over all thickness not less than 2.00 mm [with a tolerance of + - 0.2 mm ] The shutter shall have outer wooden frame made of 65 mm wide X 30 mm thick well seasoned hard wood and also with vertical, horizontal, middle & locking rails to mount the hardware & fixtures. The door surface further to have depressed mould design with special impression of wood veins of tan [brown] colour. The infill shall be with polyurethane thermo coal dipper in resin/ non-decaying type layers of cardboards dipper in resin. The entire shutter shall have glossy polish with IS specification including providing & fixing [ to each shutter]One number of 250mm long & 16mm dia. Aldrop, One number of 200 mm long & 10 mm dia. Tower Bolt; One number of 150mm long & 10 mm dia. Tower Bolt, Two numbers of 125 mm grip 'D handles, One number of 40 mm dia & 50mm long rubber bushes [Aldrop, Tower Bolts & 'D' handles shall be of approved make aluminum powder coated ], preparation of base, providing: fixing & removing necessary staging/ platform /ladder, collecting & disposing the generated waste up to a lead of 2000meters . from the place of work & cleaning the work area, etc. completed all as per standard & manufactures technical specification, drawing [if any] and as directed by Engineer-In-Charge. at all locations and at all lift / height. |
| 34 | PART - A (CIVIL WORKS)Providing and laying/fixing Suspended False ceiling using Gypsum 12.5mm thick Boards [of approved first quality & of approved make such as of India Gypsum] with GI Grid Work made using Perimeter channels [MF 6A], Ceiling Sections [MF5 : placing at 457 mm. (Maximum) C/C] , Intermediate channels [MF7: placing @ 1220 mm. (Maximum) C/C], Ceiling angles 25 x 25 mm. Size, placing @ 1220 mm. (Maximum) C/C], Screws, soffit clefts, nuts & bolts, connecting clips, Gyp board Dry wall screws, Jointing compound, Tape and all other required miscellaneous materials & consumable [of approved first quality & of approved make, such as of India Gypsum] etc. [all materials shall be confirming to the relevant BIS specification of the latest edition], Providing & applying white cement based putty of average thickness 1 mm and One coat of Interior primer [of approved quality & make] and Two coats of plastic emulsion paint of approved shade /colour [of approved quality & make], providing; fixing & removing necessary staging/platform wherever as and when directed/required, cleaning the work area & stacking of debris upto lead of 2000 meters. etc. complete all as per specification as per manufacturer technical specification and as directed by the Engineer-in-Charge at all locations and at all lifts/at all heights. |
| 35 | PART - A (CIVIL WORKS)Providing and laying/fixing in true horizantal level 600mm x 600mm False ceiling system using Aerolite fine fissured Non-cementitious light weight calcium silicate ceiling tile of size 600mm x 600mm x 15mm having NRC [Noise Reduction coeffecient] 0.15, light reflectance of >85%(minimum), thermal conductivity of 0.048 -0.052 W/m0K , density 350to 450 kg/m3,Light weight: 5-5.5 kg/m2, Noncombustible BS476-Part IV Class0/Class1 as per BIS 476-Part VI & VIII ASTM-E-87 smoke free, Humidity resistance 100% RH etc., using hot dipped galvanised steel section, exposed surface with pre-coated capping with adjustable GI rods, holding cleats grid work suitably modified along the walls and beams, fixed with anchor bolts, making extra frame work around the Air conditioning ,electrical fixtures and fittings, grills,smoke detectors fixed with necessary clips etc. removing the existing ceiling (if any),providing; fixing & removing necessary staging/platform wherever as and when directed/required, cleaning the work area & stacking of debris upto lead of 2000 mtrs. etc. complete all as per specification as per manufacturer technical specification and as directed by the Engineer-in-Charge at all locations and at all lifts/at all heights.Note: Contractor shall produce delivery challan & Tax Invoice during the execution of this contract. |
| 36 | PART - A (CIVIL WORKS)Providing and fixing \\" 304 \\" grade, Stainless Steel Wiremesh of 26 gauge wire & 16 meshes to an inch [16 X26 Gauge] of approved quality, make & confirming to relevant BIS specification of latest edition cleaning the work area, stacking the waste / unwanted materials, etc. Complete all as per specification, as per manufacturer's specification and as directed by Engineer-in-charge at all heights / lifts & at all locations. Note: A] The cost is inclusve of all materials and consumables like Self threading screws / bolts, nuts, beeding etc. B] The contractor shall submit the sample and get the approval before bulk purchase of \\"304\\" grade, Stainless Steel Wiremesh of 26 gauge wire & 16 meshes to an inch. |
| 37 | PART - A (CIVIL WORKS)Providing, fabricating and fixing Stainless Steel items made out of SS, 316 grade steel pipes [of 32 nb, 40 nb & 50 nb etc with 5 mm thick wall], tubes, angles, plates, bars and other standard sections for railings / handrails & other miscellaneous works including fabrication, transportation and fixing in the location by using suitable Stainless Steel anchoring bolts & hilty bolts and buffing etc., providing; fixing & removing necessary staging / platform, collecting & disposing the generated waste, up to a lead of 1000 mtrs. from the place of work & cleaning the work area, etc. complete all as per standard technical specification, drawing, manufacturers technical specification, as per site requirement and as directed by Engineer-in-charge at all locations & lifts / heights. |
| 38 | PART - A (CIVIL WORKS)Providing and fixing 20 micron thick Sun Control Film of GARWARE or equivalent make, of approved quality, of approved colour/shade & confirming the relevant BIS specification of latest edition including cutting to the required size & shape, fixing the same to the glass panel, also including providing & applying adhesive of approved quality & make, surface preparation properly by cleaning & washing the surface (base) with clean water for removal of oil, grease, dead mortar & other unwanted matters/materials, surface(base) shall be fully neat, clean & dry before fixing sun control film, providing, fixing & removing necessary staging/platform, stacking the debris/unwanted materials upto a lead of 2000 meters. outside the periphery of work premises etc. complete all as per specification, as per manufacturer's technical specification and as directed by Engineer-In-Charge at all locations and at all lifts/at all heights. Contractor shall produce delivery challan & Tax Invoice during the execution of this contract. |
| 39 | PART - A (CIVIL WORKS)Providing and fixing Vertical Venetian Blinds [of 1st quality & standard make] with all necessary fittings & fixturers of approved shade / colour, of required size / length & width [width of strip shall be as per manufacturers specification], Vertical Venetian Blinds shall be of superior quality & of colour / shade [as per site requirement & as selected by engineer-in-charge] includung preparation of base, collecting & disposing the generated waste, costruction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification, drawing [if any] and as directed by engineer-in-charge at all locations and at all lift / height. Contractor shall produce delivery challan & Tax Invoice during the execution of this contract. |
| 40 | PART - A (CIVIL WORKS)Providing and fixing Clear Glass for Doors, Windows & Ventilator [louvres] Shutters and Partitions etc. with PVC clear beading, 4 mm. Clear Glass shall be of Modi / Saint Gobin make and confirming to the relevant BIS specification of the latest edition, glass shall be free from all defects, cleaning the work area, colleting & stacking the construction waste / dead debris & unwanted materials / things up to a lead of 1000 meters from the place of work etc., complete all as per specification and as directed by theEngineer-in-charge at all locations and at all lifts / heights. Contractor shall produce delivery challan & Tax Invoice during the execution of this contract. |
| 41 | PART - A (CIVIL WORKS)4mm thick |
| 42 | PART - B (WATER SUPPLY AND SANITARY WORKS)Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required |
| 43 | PART - B (WATER SUPPLY AND SANITARY WORKS)W.C. pan with ISI marked white solid plastic seat and lid |
| 44 | PART - B (WATER SUPPLY AND SANITARY WORKS)Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 45 | PART - B (WATER SUPPLY AND SANITARY WORKS)White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 46 | PART - B (WATER SUPPLY AND SANITARY WORKS)Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. |
| 47 | PART - B (WATER SUPPLY AND SANITARY WORKS)One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 48 | PART - B (WATER SUPPLY AND SANITARY WORKS)Providing and fixing wash basin with C.I. brackets, 15 mm SS pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. |
| 49 | PART - B (WATER SUPPLY AND SANITARY WORKS)White Vitreous China counter sunk wash basin size 550x 400 mm with single 15 mm SS pillar tap. |
| 50 | PART - B (WATER SUPPLY AND SANITARY WORKS)Providing and fixing Exposed set for concealed stop cock made of Stainless steel with all concealed fitting arrangements & [of superior 1st quality, of standard make & confirming to relavent BIS specification of latest edition] including stacking in sectional store at Kaiga Site, Kaiga etc. Complete all as per standard & manufacturers technical specification and as directed by the Engineer-in-charge. |
| 51 | PART - B (WATER SUPPLY AND SANITARY WORKS)Providing and fixing 15 NB C.P Brass Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & [of superior 1st quality, of standard make & confirming to relavent BIS specification of latest edition] including stacking in sectional store at Kaiga Site, Kaiga etc. Complete all as per standard & manufacturers technical specification and as directed by the Engineer-in-charge. |
| 52 | PART - B (WATER SUPPLY AND SANITARY WORKS)Providing and fixing 15 NB, C.P Brass, Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements &[of superior 1st quality, of standard make & confirming to relavent BIS specification of latest edition] including stacking in sectional store at Kaiga Site, Kaiga etc. Complete all as per standard & manufacturers technical specification and as directed by the Engineer-in-charge. |
| 53 | PART - B (WATER SUPPLY AND SANITARY WORKS)Providing and fixing PVC (S.W.R) Nahani Trap of size 10 x 10cms [with grating]of all fittings of superior 1st quality, of standard make & confirming to relavent BIS specification of latest edition] Including Stacking of debris upto lead of 1000 mtrs. etc., complete all as per specification and as directed by the Engineer-in-charge at all locations. |
| 54 | PART - B (WATER SUPPLY AND SANITARY WORKS)Providing & fixing on the wall surfaces UPVC pipes with specials ( such as Tees: bends: junction with or without door, flanges and all other required fittings etc. of Ashirvad/Astral/finolex / Supreme make, for rain water down commer pipes including providing and fixing necessary clamps (GI clamps of 25 mm. wide x 4 mm thick) of length ( as per site requirement ), hard wood packing pieces, solvents, screws / nails, cement & sand etc., providing, fixing & removing stging / platforms / scaffolding, collecting & disposing the generated waste, disposal of construction waste up to lead of 2000 meters from the work area, etc. complete all as per standard technical specification, manufacturers standard technical specification, drawing ( if any) and as directed by Engineer-In-Charge at all locations and at all locations and at all lifts & height. |
| 55 | PART - B (WATER SUPPLY AND SANITARY WORKS)100 mm nominal dia Pipes |
| 56 | PART - B (WATER SUPPLY AND SANITARY WORKS)Providing and laying / fixing CPVC Pipes & fittings confirming to ASTM F439 with its all required Plain & brass threaded fittings [such as collars, elbows, tees, unions, coupling, reducers, enlargers, bends, nipples and all other fittings required for completing the job, as per code of practice for water supply to the buildings -BIS 2065 of the latest edition, all materials shall be of superior 1st quality, of standard make & all materials shall be confirming to relavent BIS specification of latest edition] including Concealing in the Wall [making groove of 75 mm deep in wall with suiitable width and finishing same with PCC - 1:2:4 - using 6 mm down aggregates & plastering in C:M 1:5], fixing on Wall Surface & laying Below the Floor / Ground with suitable PVC clamps, jointing the pipes & fittings using CPVC solvent, cost of all materials like white or red lead, clamps, cement, sand, tools & tackles, testing the pipe with clean water [as per specification] and ensuring smooth functioning, providing; fixing & removing necessary staging / platform [if required], preparation of base, collecting & disposing the generated & costruction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification and as directed by engineer-in-charge at all locations and at all lift / heights. |
| 57 | PART - B (WATER SUPPLY AND SANITARY WORKS)20mm dia [Concealed] |
| 58 | PART - B (WATER SUPPLY AND SANITARY WORKS)20mm dia [Exposed on wall] |
| 59 | PART - B (WATER SUPPLY AND SANITARY WORKS)25mm dia [Concealed] |
| 60 | PART - B (WATER SUPPLY AND SANITARY WORKS)25mm dia [Exposed on wall] |
| 61 | PART - B (WATER SUPPLY AND SANITARY WORKS)32mm dia [Concealed] |
| 62 | PART - B (WATER SUPPLY AND SANITARY WORKS)32mm dia [Exposed on wall] |
| 63 | PART - B (WATER SUPPLY AND SANITARY WORKS)Providing and fixing of mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. |
| 64 | PART - B (WATER SUPPLY AND SANITARY WORKS)Rectangular shape 453x357 mm |
| 65 | PART - B (WATER SUPPLY AND SANITARY WORKS)Supplying of 36W LED 2'x2' panel of white light with recessed panel for false ceiling of Panasonic or make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge |
| 66 | PART - B (WATER SUPPLY AND SANITARY WORKS)Supplying of 15W LED round 150mm dia ceiling mount of Panasonic make confirming to the relevant BIS specification of the latest editions and as directed by Engineer-in-charge |
| 67 | PART - B (WATER SUPPLY AND SANITARY WORKS)Providing and fixing of Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 68 | PART - B (WATER SUPPLY AND SANITARY WORKS)75mm nominal dia pipes |
| 69 | PART - B (WATER SUPPLY AND SANITARY WORKS)110mm nominal dia pipes |
| 70 | PART - B (WATER SUPPLY AND SANITARY WORKS)Providing,erecting and fixing Water Storage Tank of standard brand / Make of superior 1st quality [confirming to the relevent BIS spcification of the latest edition] of 5000 litre capacity, High Density, 3 Layer blow moulded, food grade water storage tank including providing and fixing one number of PVC float valve- 1\\" dia. three numbers [ball valve non - return valve & gate valve etc.] of UPVC valves - 1\\" dia [ all Valves shall be of superior 1st quality , of standard make. of heavy duty & confirming to ISI specification], ensuring smooth functioning, providing, fixing & removing necessary staging / platform, preparation of base , collecting & disposing the generated & construction waste up to a lead of 2000 meters from the place of work & cleaning the work area, etc. complete all as per standard & manufacturers technical specification and as directed by engineer - in - charge at all locations and at all lift / heights. |
| 71 | PART - B (WATER SUPPLY AND SANITARY WORKS)5000 - Litres Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender