Tender For Repair/Replacement Of Sanitary Fitting Internal Water Supply Flooring & Joineries And Repair/Maint To Interlocking Tiles/Chequered Tiles, Plain Cement Concrete Path, Security Fencing And Camouflage Painting Work In Certain Building At Afs
Tender Value
1.30 Crore
Estimated cost
Bid Submission
06 Oct 2026
17 days left
EMD
2.05 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Sanitary Fitting Internal Water Supply Flooring & Joineries And Repair/Maint To Interlocking Tiles/Chequered Tiles, Plain Cement Concrete Path, Security Fencing And Camouflage Painting Work In Certain Building At Afs Rajokri Under Ge (Af) Gurgaon
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed |
| 2 | M&L for non skid ceramic tiles 7 to 8 mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.11 sqm, in floors and scantling etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile complete all as specified and as directed. |
| 3 | M&L for Nonskid coloured ceramic tiles 7mm thick area of each tiles exeeding 0.11 sqm but not exceeding 0.18 sqm in floors/skirting etc. set and jointed neat cemet slury and pointed in coloured cement to match complete all as specified and as directed. Notes : Screed bed measured and paid separately. |
| 4 | M&L for Coloured Vitrified Ceramic tiles 9-10 mm thick (Square/rectangular) of Light Shade , polished, area of each tile not exceeding 0.36 sqm, fixed in floor/skirting etc over set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified. |
| 5 | M&L for double charged coloured Vitrified Ceramic tiles 9-10 mm thick (Square/rectangular) of light Shade , polished, area of each tile exceeding 0.36 sqm and n. exc 0.72 sqm and , fixed in floor/skirting etc over set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified. |
| 6 | M & L for glazed ceramic coloured tiles of size 350x 250x 7 / 450X 350X 7 mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match of tiles, complete all as specified and directed. |
| 7 | Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 8 | M&L 20-25mm thick machine cut kota stone slab as in flooring, steps of stair(treads), over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the sahde of the slab including rubbing and polishing incl complete all as specified and directed. |
| 9 | M&L 20-25 mm thick machine kota stone slab as in skirting/dado, riser of steps, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 10 | M&L for 18-20 mm thick Granite tiles machine cut , bedded and jointed with grey cements slurry and pointed with white or colour cement with admixture of pigment to match the shade of granite stone including grinding & polishing slab over screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4) laid complete all as specified and directed. |
| 11 | M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4) for bedding of tiles complete all as specified and directed. |
| 12 | M&L 10 mm thick rendering in cement mortar (1:3) on vertical surfaces for backing of tiles etc complete all as specified and directed. |
| 13 | M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6) for bedding of tiles complete all as specified and directed. |
| 14 | M&L for 15 mm thick rendering in cement motar (1:4) on vertical surface for bracking of tiles etc complete all as specified and directed. |
| 15 | Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified and directed. |
| 16 | M&L for 25mm thick plain cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in sub base flooring, roof padding complete all as specified and directed. |
| 17 | M&L for 40mm thick plain cement concrete type B-1 (1:2:4) using 20mm gradedstone aggregate as in sub base complete all as specified and directed. |
| 18 | Taking down shutters of any description not exceeding 1 Sq. m each, from chowkhat, complete all as specified and directed. |
| 19 | Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, from chowkhat, complete all as specified and directed. |
| 20 | Taking down Chowkhats with shutters without taking of shutter from the frame of any description not exceeding 1.50 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists complete all as specified and directed. |
| 21 | Taking down Chowkhats with shutters without taking of shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified and directed. |
| 22 | S&F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including back filling with PCC (1:3:6), type C-0, complete all as specified and directed. |
| 23 | S&F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including back filling PCC (1:3:6), type C-0, complete all as specified and directed. |
| 24 | S&F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed. |
| 25 | S&F flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. |
| 26 | S&F for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded coloured PVC ’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of single side prelaminated PVC sheet to be fitted in the MS frame welded/ sealed into the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification ccomplete all as specified and directed. |
| 27 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet & reinforced with MS square tube and fixing in opening as specification & drawing, complete all as specified and directed. |
| 28 | S&F powder coated anodized aluminum frame for partition, doors, windows, ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 29 | S&F powder coated anodized aluminum door shutters, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door,100 mm long hinges (3 Nos), anodized aluminum snap beading screws etc. complete all as specified and directed. |
| 30 | S&F powder coated Anodised aluminium window and ventilator shutters, fixed/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 31 | S&F Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 32 | M & L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in padding, coping, bed plates, hold fast blocks, etc., including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 33 | M&L Cement concrete 1:3:6 type C–1 (using 20 mm graded stone aggregate) as in filling of pressed steel door frame and hold fast blocks etc all as specified and directed. |
| 34 | S&F Mild steel butt hinges medium weight, cold rolled, 100 mm, ISI marked, complete all as specified and directed. |
| 35 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and directed. |
| 36 | S&F 200 mm aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed. |
| 37 | S&F 150mm size aluminum handle fabricated, 'D' type, anodized ISI marked complete all as specified and directed. |
| 38 | S&F in repair 200 mm aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed. |
| 39 | S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 40 | S&F in repair 150 mm long, Aluminum anodised floor door stopper alloy body and tounge, anodised, with hard drawn steel spring fixed in floor in repairs complete as specified and as directed. |
| 41 | S&F in repair steel helical door spring 300mm ordinary rat rail rod pattern springs including roller plate complete all as specified and as directed. |
| 42 | S&F in repair door seal bottom with aluminium plate and rubber insulation 42'' x 1.5'' complete all as specified and as directed. |
| 43 | S&F in repair for aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 44 | Material and labour, Gunniting to existing RCC Chajja, facia, parapet, beams, landings and similar RCC members after removing all loose concrete & preparations of surface, application of derusting chemical such as Dr Fixit Rust Remover or equivalent, welding additional bars/welded steel wire fabric if found necessary, priming reinforcement bars with a coat of zinc primer of coating not less than 40 micron, provision of bonding agent with bonding material like Dr Fixit bonding agent and repair to external RCC structure with slurry light and steel/ply form work and shortcrete concrete of mixed 1:3:1 (one part of cement, three part of coarse sand and one part of 10mm and down aggregate) of minimum 50mm thick incl plastering 5 mm thick in CM mortar 1:3 all as specified in IS 9012-1978 (all priming and bonding epoxy based paint shall be of Dr Fixit epoxy zinc primer or equivalent) etc complete all as specified and directed, as below:-Note(s) : 1. The rates include for necessary formwork and scafolding etc. 2. Reinforcement and welded steel wire fabric will be measured and paid separately. |
| 45 | Dismantling of wrought iron of mild steel work of any description in any position not otherwise specifically provided for complete all as specified and directed. |
| 46 | S&F framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks, grills to balconies fixed to RCC/ brick walls and similar work complete all as specified and as directed. |
| 47 | S&F steel work as in tubular, rafters, purlins, posts and similar work (round/sqare/rectangular shape of pipes as approved by Engr-in-charge ) trusses of semi circle/ curved shape up to height 6 mtr including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240 complete all as specified and directed. |
| 48 | S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, without any attachment confirming to Fe 410-S complete all as specified and directed. |
| 49 | Dismantling AC sheet (corrugated ,semi corrugated etc) in roof coverings incl ridges etc complete all as specified and as directed. |
| 50 | M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 51 | S&F for pre-painted Galvalume aluminium Zinc cooating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 52 | S&F in repair false ceiling with exposed GI system using “SILHOUETTE XL 15 mm (Nominal) designer Grid \\"Armstrong\\" white or Global white with black reveal and 600 x 600 x 15 mm thick prime fine fissured micro look white/coloured tiles (superfine 15mm/silhouette). Making necessary framework for AC ducting, if any and necessary cutouts for diffusers and light fittings, taping and finishing to proper line & level and incl dismantling old undervicable false ceilling complete all as per manufacturer’s instructions and as directed. |
| 53 | Dismantling/removing old damaged worn out APP of any thickness incl screed bed or plastering of any thickness and removing the rubish materials outside MOD land at a dumping place earmarked marked by any state govt/municipalities etc any distance complete all as specified and directed. |
| 54 | Material and labour 15 mm thick screed bed in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 3% by wt of cement on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately. |
| 55 | Supply only Water Proofing compound complete all as directed. Make : Dr. Fixit and approved makes mentioned in Tender Documents |
| 56 | Material and labour, water proofing treatment of roof consisting as under:-(a) Applying a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm over a coat of primer @ 0.30 litre/ sq.m including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions complete all as specified and directed. |
| 57 | M&L for Cement concrete tiles 25cm x 25cm x 22 mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished, set with grey cement and pigments over 15mm thick cement screed bed in cement mortar 1:4 complete all as specified and directed. |
| 58 | M & L for preparation of new painted surfaces of wood and wood based materials of any description not other wise described over 10 cm width or girth and applying Two coat of synthetic enamel paint over a pink primer coat complete all as specified and directed |
| 59 | M&L Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed. |
| 60 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and directed. |
| 61 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and directed. |
| 62 | S&F for 4.8/5.0 mm thick sheet glass ordinary quality and glazing each pane n exc 0.50 Sqm fixed with neoprene rubber gasket in aluminium frame work complete all as specified and directed. |
| 63 | Taking up or down steel tubing and connections 15mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed. |
| 64 | Taking up or down steel tubing and connections 20mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed. |
| 65 | S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 66 | S & F 20 mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 67 | Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc; and cuttings chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth all as specified and directed |
| 68 | Disconnecting existing PVC water tank of capacity exc. 250 ltr but not exc. 500 ltr, setting aside for lowering down if required for repairs, hoisting if required reconnecting and refixing in position on roof including cleaning of Overhead tank & removing the sludge washing down with detergent/ bleaching powder and writing the date of cleaning with suitable paint complete all as specified. |
| 69 | Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified and directed. |
| 70 | Dismantling water tanks of capacity exceeding 500 and not exceeding 1000 ltrs complete all as specified and directed. |
| 71 | S&F for rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified and directed. |
| 72 | S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres complete all as specified and directed. |
| 73 | S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore dia iron pipe supplied and fixed in repairs complete all as specified and as directed. |
| 74 | S&F in repair for 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as specified and directed. |
| 75 | S & F in repairs Ist quality vitreous china pedestal pattern wash basin, white, flat back, size 550x400mm , including one number chromium plated waste fittings, 32 mm dia brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed with & including 32 mm dia PVC waste pipe with connector including cutting for and pinning in ends of brackets etc complete all as specified and directed |
| 76 | S & F in repairs Ist quality vitreous china wash basin, white, flat back, size 550x400mm , PVC connections suitable for hot and cold water,bottle trap (with internal partition) 32 mm size with 300mm &190mm long wall connection pipes & wall flange, and fixing withbrackets/bolts including cutting and pinning in etc complete all as specified and directed. |
| 77 | S&F in repair vitreous china Counter top Wash hand basin (White) of size (570x420x195 mm) mm complete all as specified. Make: Jaquar Cat No. FLS-WHT-5601 or Equivalent to approved makes mentioned in Tender Documents |
| 78 | S&F in repairs white vitreous China wash down water closet pan (padestal pattern) and trap (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe anti syphonage pipe etc. complete all as specified and directed. |
| 79 | S&F in repair vitreous china Rimless Single Piece WC (White) With PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories And Accessories Set, Size: 370x690x750 mm, S Trap- 300 mm complete all as specified. Make: Jaquar Cat No.CNS-WHT-853S300SPPSM or Equivalent to approved makes mentioned in Tender Documents |
| 80 | S&F in repairs vitreous china squating pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed. |
| 81 | S&F in repair plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified. |
| 82 | S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed. |
| 83 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and mixed in position complete all as specified and directed. |
| 84 | S&F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified. |
| 85 | S & F in repairs PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed. |
| 86 | S & F in repair brass CP Wall mixer with L bend incl (provn for over head shower), 15 mm bore chromium plated fancy type for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.Make Cera Cat Part No F2002401 or Equivalent in approved makes mentioned in Tender Documents. |
| 87 | S&F Single Lever 3-inlet Diverter Exposed parts kit chrome finish consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals), Button Assembly Sleeve and Button Cap , 15 mm nominal bore complete all as specified and directed.Make: Jaquar Cat No.OPP-CHR-15193NKPM or Equivalent in approved makes mentioned in Tender Documents. |
| 88 | S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe, 15mm dia chromium plated fancy type complete all as specified and directed |
| 89 | S&F in repair Centre hole basin mixture with hot or cold mounted tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts fancy type screwed for iron pipe, complete all as specified and directed. |
| 90 | S&F in repair Exposed Part Kit of Single Lever Basin Mixer Wall Mounted chrome finish consisting of Operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout 15 mm nominal bore complete all as specified and directed. (Cat No.ARI-CHR-39233NK) Make: Jaquar/Equivalent |
| 91 | S&F in repair 32 mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. |
| 92 | S&F in repair angular two way angle cock with wall flange, 15 mm bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 93 | S & F in repairs bib taps, long body cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed. |
| 94 | S & F in repairs 15mm dia stop valves/angle valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed. |
| 95 | S & F in repairs chromium plated shower rose 125mm size incl shower arm casted 190 mm long flat shape for wall mounted showers with flange incl fixing to steel pipe or union complete all as specified and directed. |
| 96 | S&F in repair Soap dish of chromium plated or stainless steel fixed to wall with chromium plated brass screws complete all as specified and directed. |
| 97 | S & F in repairs 600 x 450 mm size beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed with wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 98 | S&F in repairs coloured PVC toilet cabinet of size 622x422mm with looking mirror including repairing the disturbed surfaces to match with existing complete all as specified and directed.(Make: Pyayag-555 or equivalent) |
| 99 | S&F in repair Corner glass shelf, 5mm thick glass, 9\\" wide, fixed with suitable mild steel CP brackets, nuts & bolts all as specified and as directed.Make: Onida/ High Life/ Eagle or approved makes mentioned in Tender Documents |
| 100 | S & F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. |
| 101 | S & F in repairs stainless steel sinks with drainage board made out of 1.00 mm thick sheet for kitchen with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm dia and making good to disturbed surfaces, fixed in repairs, complete all as specified and directed. |
| 102 | S&F in repairs SFRC manhole cover of size 600mm x 600mm x 70mm thick with frame set in cement mortar 1:4 complete complete all as specified and directed. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame |
| 103 | S&F in repairs SFRC cover slabs of size 450mm x 450mm x 40mm thick with frame set in cement mortar 1:4 complete all as specified and as directed. Notes- (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete (b) M/s KK Manhole Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame |
| 104 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittinges, heads, shoes, bends, swan-necks etc complete all as specified and directed. |
| 105 | S & F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to trenches / floor complete all as specified and directed. |
| 106 | S & F in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to trenches/ floor complete all as specified and directed. |
| 107 | S & F in repair 110 mm bore PVC (SWR) bends with/without door of any radius complete all as specified & directed. |
| 108 | S & F in repair 110 mm bore PVC (SWR) junction single, (single T), equal or unequal with/without door of any radius complete all as specified & directed. |
| 109 | S & F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed. |
| 110 | S & F in repair 75 mm bore PVC (SWR) junction single, (single T), equal or unequal with/without door of any radius complete all as specified & directed. |
| 111 | S&F in repair PVC floor trap with grating incl jointing to waste pipe of 75 mm dia in and including jointing with solvent cement complete all as specified and directed. |
| 112 | S&F in repair PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed. |
| 113 | M & L for hard core of gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 114 | M & L 100mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) as in sub base including use of necessary form work complete all as specified and directed. |
| 115 | M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified and directed. |
| 116 | M&L Non-skid coloured Endura outdoor tiles 18-20 mm thick (Square/rectangular) of each tile exc 0.06 Sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slury and pointed in coloured cement and pigment to match the tiles complete all as specified and directed. |
| 117 | S&F for Factory made machine pressed Chequered cement concrete colour tiles 30 cm X 30 cm X22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors , over 20 mm thick screed bed in CM 1 :4 complete all as specified and as directed. |
| 118 | S&F in for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed. |
| 119 | M&L for Sand (M Sand) filling under interlocking tiles or in foundations, spread and levelled including watering and consolidation complete all as specified and directed. |
| 120 | M&L for cement concrete type B0 1:2:4 (using 12.50 mm graded stone aggregate) as in coping benching, gola, slightly rounded and similar items complete all as specified and directed. |
| 121 | S&F in repair steel rolling shutter of thickness 1.25 mm without ball bearing as specified including top cover , anchoring rod , hasp and staple and one shop coat of primer erected in position, gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 122 | Taking down wall panelling and similar work complete all as specified and directed. |
| 123 | S&F for solid colour wood grain printed PVC sheets 5mm thick as in wall panelling inclusive of solvent cement incl necesssary PVC frame work for fixing on brick or concrete wall as per specification and drawing complete all as specified and directed. Please Enable Macros to View BoQ information |
| 124 | S&F for solid colour wood grain printed PVC sheets 5mm thick as in wall panelling inclusive of solvent cement incl necesssary PVC frame work for fixing on brick or concrete wall as per specification and drawing complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender