Tender For Misc Certain B/R Repair Of Security Fencing, Steel Gate Hardstanding And Path Etc And Post Att To Certain Bldg Under Age B/R-Ii Of Ge Saugor
Tender Value
45 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
18 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Misc Certain B/R Repair Of Security Fencing, Steel Gate Hardstanding And Path Etc And Post Att To Certain Bldg Under Age B/R-Ii Of Ge Saugor
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 2 | Restraining resecuring Galvanised steel barbed wire of any discription in any position including making good staples etc. complete all as specified and directed. |
| 3 | M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundations/ mass concrete complete all as specified and directed. |
| 4 | M&L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundations/ mass concrete complete all as specified and directed. |
| 5 | S&F Mild steel work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 6 | Dismantling fencing wire mesh, any type and discription complete all as specified and as directed. |
| 7 | S&F Chain link MS galvanisd fencing, any size or type including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 8 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 9 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n'exc 5cm long and neck dia 12mm complete all as specified and directed. |
| 10 | S&F mild steel round bars 10 mm dia and above as in line bar of fancing, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 11 | M&L for cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) in lintels up to 1.5m clear span, cills, steps, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railings upto 60cm in height, coping, kneelers apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed |
| 12 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10cm width or girth including preparation of new steel surfaces complete all as specified and directed. |
| 13 | M&L mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to beprepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings including steel sheeting or other covering, running rails and guides, hanging; also fastening and fixing, Fe 410-W (Gde E- 250) quality A complete complete all as specified and directed. |
| 14 | S&F 60mm thick Machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment, any shape and size confirming to IS- 15658-2006 of M-35 grade, laid on 50mm thick sand cushion complete all as specified and directed.Note: The cost of sand cushion shall be deemed included in quoted unit rates.Make: M/S MEHTAB TILES, M/s NITCO (NITCO), M/s SUPREME TILES (SUPREME) |
| 15 | M&L for Brick work with sub- class ‘B’ old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed |
| 16 | M&L for coloured anti-slip with grip ceremic exterior grade, heavy duty tiles (ENDURA OR Equivalent), size 300x300x 8 to 9mm laid in floors etc over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in floor and pointed in neat cement slurry with grey cement and pigment complete all as specified and directed. |
| 17 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 18 | M&L for rendering cement plaster, 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6, finishing surfaces even and smooth without using extra cement complete all as specified and directed |
| 19 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 20 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 21 | S&F in repair precast ce-ment concrete louvers and jallies, 35mm thick (mea sured solid), with including all mould-ings but excluding frame and setting in mortar 1:6 complete all as specified and directed.Note : Pre cast frame shall be measured separately and paid for under item No. 93 below |
| 22 | Dismantling posts or struts (wood, steel or R.C.C.) embedded in Concrete, brick work, masonry, etc. any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 23 | M&L for applying three coats of white wash on newly plastered wall surfaces including preparation of these surfaces complete all as specified and directed. |
| 24 | M&L for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floors, finished surface even and smooth using extra cement complete all as specified and directed. |
| 25 | S&F Glass dividing strips dividing strips, 3mm thick and 38mm wide, inserted in position, conform to design complete all as specified and as directed. |
| 26 | M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed. |
| 27 | M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed. |
| 28 | M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed. |
| 29 | M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed. |
| 30 | M&L for 75mm thick PCC 1:3:6 type C-2, (using 40mm graded stone aggregates) as in plinth protection finishing surface even and smooth without using extra cement including providing construction joint (at an interval not more than 3.0m) and filled with bitumen and sand mortar in 1:3 complete all as specified and directed. |
| 31 | M&L for Non skid fully vitrified ceramic coloured tiles in floors etc, 8 to 10mm thick, area of each tiles exc 0.36 sqm but n'exc 1.00 sqm (square/ rectangular) tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour/shade over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed. |
| 32 | All as per item 31 above but as in Dado/skirting fixed over and including 10mm thick rendering in CM (1:4). |
| 33 | M&L for two coats of cement base wall care putty in two coats @ 1Kg/Sqm (0.5Kg in each coat) on new plastered surface of wall/ceiling as preparatory work to painting including cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and made ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 34 | M&L for complete removal of existing treatment and applying two coats of cement base wall care putty in two coats @ 1Kg/Sqm (0.5Kg in each coat) on of wall/ceiling surfaces as preparatory work to painting including brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 35 | M&L for Non skid ceramic coloured tiles in floors etc, 7 to 8mm thick, area of each tiles exc 0.18 sqm but n'exc 0.38 sqm (square/ rectangular) tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour/shade over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed. |
| 36 | M&L for digital glazed ceramic tiles, coloured tiles 600mm x 300mm x 7-8mm thick on vertical surfaces ie. as in skirting/dado etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed in cement mortar (1:4) complete all as specified and directed. |
| 37 | M&L for 25mm thick PCC (1:2:4) type B-0 (using12.50mm graded stone aggregate) as in levelling course to sub base, finished surface rough to receive the tiles complete all as specified and directed. |
| 38 | Demolition of cement concrete (unreinforced) in ground floors and pavings (below or above ground level), n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 39 | M&L for rendering cement plaster, 10mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6, finishing surfaces even and smooth without using extra cement complete all as specified and directed |
| 40 | M&L for two coats of acrylic exterior emulsion paint over and including one coat of exterior primer on prepared surfaces of wall complete all as specified and directed.Make : Asian (Appex Altima)/ Berger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 41 | M&L for two coat of acrylic interior emulsion paint over and including one coat of interior primer on prepared surfaces of wall/ceiling complete all as specified and directedMake : Asian (Apcolite)/ Berger(self breath easy)/ Nerolac(nerolac Impression HD)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 42 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender