Tender For Certain Repair To Security Fencing , Path, Hard Standing, Retaining Walls, Drains, Repair/Cleaning Of Sewage Line, Manholes, Septic Tank, Soakage Well, Filter Beds, Street Lights & Misc Works At Mil Stn Dharchula Under Ge(Mes) Pithoragarh
Tender Value
42 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
16 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pithoragarh → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair To Security Fencing , Path, Hard Standing, Retaining Walls, Drains, Repair/Cleaning Of Sewage Line, Manholes, Septic Tank, Soakage Well, Filter Beds, Street Lights & Misc Works At Mil Stn Dharchula Under Ge(Mes) Pithoragarh
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | M& L for clearing blockage of WC/Gully/floor traps by Roding/pressure to clear blockage upto first man hole complete all as specified and directed. Note- (a) Contractor/Rep of the contractor has to collect the complaints on daily basis from in charge of complaint cell.(b) The blockage of WC/Floor Trap/Gully Trap are to be cleared on the same day of the receipt of complaint. |
| 3 | M&L cleaning of existing septic tank and sewage well by closing the existing sewage system at last man hole. Removing man hole cover and dewatering the liquid waste by mechanical pumping. Removing the solid sludge by manually or by mechanical system up to the bottom of septic tanks and sewage well at any size incl depositing the solid sludge in the pit providing by digging in near by septic tank of appropriate size. Whole area to be covered with bleaching powder and covered by natural earth obtained from excavation after filling the solid sludge and making good completely hygienic and directed at site. Note: During the cleaning of soakage wells/septic tanks, alternate arrangement be made by contractor by temporary pumping arrangement for clearing continuous incoming sewage complete all as specified and directed Note :-(i) The cost of excavation of pit, bleaching powder and RFR to cover the sludge shall deemed to be inclusive in rate quoted by the contractor.(ii) All the tools and plants including mechanical pump and other allied arrangements for making sewage line functional will be made available by the contractor with out any extra cost to the Govt. (iii) Mode of Measurement- Qty of solid sludge shall only be measured for payment which shall be considered as 30% of volume of total liquid waste. |
| 4 | M&L for Cleaning of sewage line blocked/filled with sludge (solid/semi solid) silt and any other waste by Roding or any other means (without damage to sewage line ) manhole to manhole and well pushing and cleaning including removing the waste to a distance not exceeding 50 meter and buried into pit excavated upto 15 cm depth below the GL and cover with excavated soils after treating the sludge by spreading a fine layer of bleaching powder as directed to reduce the foul gases and refixing man hole cover slab in position for sewage line of dia upto 200mm and at any depth complete all as specified and directed. Note :-(i) The cost of excavation of pit, bleaching powder and RFR to cover the sludge shall deemed to be inclusive in rate quoted by the contractor.(ii) All the tools and plants including mechanical pump and other allied arrangements for making sewage line functional will be made available by the contractor with out any extra cost to the Govt. |
| 5 | S&F On site conventional LLDPE septic tank of total capacity of 3000 ltr designed to carry sewage and sullage water, incl excavation in any type of soil & 100mm PCC 1:4:8 below foundation, Vent shaft, connection etc., complete all as specified and directed. |
| 6 | Construction of Soakage well incl excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.20m dia and 3.0m effective depth all as per CEBZ TD/309 SHT-1/4 to 4/4 complete all as specified and directed. |
| 7 | Dismantling of 200 mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required |
| 8 | S&F reinforced concrete pipes, class NP2, 200mm laid and jointed complete with collars, complete all as specified and directed. |
| 9 | M&L for concrete bed 1:4:8 type D-2 (Using 40 mm graded stone aggregate) as in drain pipes including packing under, and haunching against the side of pipes after the are laid and tested in 200 mm bore pipe, complete all as specified and directed. |
| 10 | Cutting into existing manholes for connecting new drains, of any dia making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete (1:2:4 ) type B1 using 20mm graded crushed stone aggregate finished smooth and reforming benching as required for 200 mm dia pipe complete. |
| 11 | Excavation in trenches in hard/dense soil n.exc 1.50 m deep and 1.50m wide or shafts, manhole etc n.exc 10 Sqm on plan and n.exc 1.50m deep and getting out complete all as specified. |
| 12 | Returning, filling in trenches, including spreading, leveling watering and wall ramming in layers each n.exc 25cm in hard/dense soil complete all as specified. |
| 13 | Removal of surplus spoil to a distance n.exc 50m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 15 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as spfd & directed. |
| 16 | M&L for coloured glazed ceramic tiles in vertical surface, 350x250x7mm to 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick plaster in CM 1:4 complete all as spfd & directed. |
| 17 | M&L for 4-5mm thick PVC vinyl synthetic tiles/ sheets/mat, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as spfd & directed. |
| 18 | S&F in repair Low Level Flushing System PVC valve less syphonic action type, 10 ltrs capacity including supply pipe & fixing with the help of rawl plugs on walls etc complete all as specified and directed. |
| 19 | S&F in repair Vitreous China Wash down water closet EWC with plastic seat cover complete all as specified and as directed . |
| 20 | S&F in rep vitreous china squatting pan \\"Orissa pattern\\" size 580 mm x 440 mm white with integral foot rests, incl provn of lime concrete bedding complete all as spfd & directed. |
| 21 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar |
| 22 | S&F PVC (SWR)110 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or fixed to walls complete. |
| 23 | S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or fixed to walls complete. |
| 24 | S&F 110 mm bore PVC(SWR) bend/TEE any radius |
| 25 | S&F 75 mm bore PVC(SWR) bend/TEE any radius |
| 26 | Demolition of cement concrete in ground floor, paving nexc 15cm thick(below or above GL) complete all as specified and directed |
| 27 | M&L cement concrete work in pavement/hard standing of flexural strength 40 kg/square centimeter in field using 400 kg of cement per cubic meter, thickness of concrete 25 cm or less all as spfd directed |
| 28 | M&L providing cement concrete type B0, 1:2:4 (12.5mm aggregate) in roof kerbs or mud stops, coping, rounded or chamfered on edges complete all as specified and directed |
| 29 | M & L cement concrete 1:2:4 type B2 (20mm aggregate) in surface channel |
| 30 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 31 | Dismantling post or struts (steel) any section, embedded in concrete etc including taking out embedded portion and making good the disturbed ground complete all as specified and directed. |
| 32 | M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 33 | S&F MS posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as spfd and directed |
| 34 | All as per item no. 8 above but except material |
| 35 | M & L for MS round bars (Fe-410-W (Gde E-250) quality A or Fe-290 (Gde-E-165)) 10mm dia and over cut to Length bent to shape required incl cranking, bending, spirally for hooping for columns with an including MS wire( Annealed not less than 0.90 mm Dia) or securing with clips complete all as specified and directed. |
| 36 | All as per item no. 34 above but except steel bars |
| 37 | Supply only chain link MS galvanised fencing any size and type complete all as specified and directed. |
| 38 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire complete all as specified and directed. |
| 39 | S & F Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 40 | Dismantling of plain or corrugated steel sheeting of any guage/thickness in roof covering/wall cladding complete all as spfd and directed |
| 41 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding, fixed with self tapping screws complete all as specified and directed. |
| 42 | M&L for 2 coats of synthetic enamel paint over one coat of red oxide on newly prepared steel surface of any description ,not otherwise description over 10cm width or girth. |
| 43 | M & L preparing old previously treated surfaces of steel surface over 10 cm girth or width and applying one coat of synthetic enamel paint on old steel surfaces complete all as specified and directed. |
| 44 | Demolition of brick work, stone/boulder masonry built in cement mortar complete all specified and directed |
| 45 | M&L for brick work built in cement mortar (1:4) using sub class ‘B’ bricks (old size) straight or curved in plan, exc 6.00 m mean radius complete all as specified. |
| 46 | M&L for Pre-cast cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed. |
| 47 | M&L for brick work with sub class 'B' brick old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as spfd & directed. |
| 48 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in C.M. 1:6, complete all as specified. |
| 49 | M&L Stone walling of random rubble, brought upto course, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and as directed |
| 50 | M&L Hand packing (any thickness) at back of walls with broken stone or boulders and raising (or lowering) to the required level complete all as specified and directed. |
| 51 | S&F 75mm bore PVC(SWR) pipes single socketed for weep holes , in any length with rubber ring joints, as in weep holes complete all as specified and directed. |
| 52 | M & L for flush pointing to random rubble masonry, brought upto courses in CM 1:4 complete all as specified and as directed. |
| 53 | Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as spfd and directed. |
| 54 | M&L 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 55 | M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 56 | M&L three coats of white wash on wall surfaces including prepration of new plastered surfaces complete all as specified and directed |
| 57 | Roughening surfaces of old concrete floor by picking ,sweeping clean and washing down with water to remove dust etc. |
| 58 | M & L for 25mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in levelling course complete all as specified & directed. |
| 59 | M&L for vitrified ceramic light shade tiles/outdoor tiles 8-12mm thick (square or rectangular) polished area of each tile not exc.0 .36 sqm in floor,dado etc and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid over screed bed,rendering or bedding layer of mortar CM (1:6) 15mm thick all as specified and directed |
| 60 | Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 61 | S&F for mild steel framed wk as in doors or gates of angle iron,tubular or other section complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with & incl either hooks & hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and slides) & hanging, also fastening & fixing Fe-290, Gde-165 complete all as spfd & directed. |
| 62 | S&F 1.00 mm th Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams,including bending or turning up, mitred angles, etc. as required complete all as spfd & directed. |
| 63 | S&F 100 mm mild steel but hinges medium weight,cold rolled complete all as specified and directed |
| 64 | S&F 250mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate and fixed complete all as specified and directed |
| 65 | Demolition reinforced cement concrete in any description and in any position complete all as specified and directed. |
| 66 | M&L for pre-cast reinforced cement concrete as in cover slabs (1:2:4) type B1 using 20mm graded stone aggregate complete after placing in position over septic tanks/ manhole covers etc complete all as specified and directed . |
| 67 | M&L Slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like using cement concrete type B-0 1:2:4 complete all as specified and directed |
| 68 | M&L for pre-cast reinforced cement concrete as in cover slabs (1:2:4) type B1 using 20mm graded stone aggregate complete after placing in position over septic tanks/ manhole covers etc complete all as specified and directed . |
| 69 | M&L RCC type B-0 (1:2:4)(using 12.5mm graded aggregate) as in columns, pillars, piers etc complete all as specified and as directed. |
| 70 | M&L RCC type B-0 (1:2:4)(using 12.5mm graded aggregate) as in beams, cantilever, lintels etc complete all as specified and as directed. |
| 71 | S&F Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surface of concrete complete all as specified and directed |
| 72 | M&L form work to sides and soffits of roof beams, lintels lever shelves,chajjas incl supports over hang etc rough finished surfaces of concrete flat all as specified. |
| 73 | M&L form work to sides of pillars, posts, struts, columns for rough finished surface of concrete |
| 74 | M & L mild steel TMT bars 6 to 8mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed |
| 75 | M & L mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed |
| 76 | Dismantling for Stone slabs and tiles/interlocking paver block of any description or thickness in floors, aprons etc laid dry or laid dry and pointed |
| 77 | M&L for Sand filling under floors or in foundations including watering and consolidation |
| 78 | M&L for Machine pressed precast concrete coloured interlocking paver block any shape, size & color (as approved) confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment |
| 79 | M&L for Machine pressed precast concrete coloured interlocking paver block (except tiles) any shape, size & color (as approved) confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment |
| 80 | Dismantling of timber scantling 40 sqcm and over in section in any position for unframed works complete all as specified and directed |
| 81 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (beam, tee, angle channel or flat sections) (Fe-290 Gde E-165) including distance pieces, cleats etc. Please Enable Macros to View BoQ information |
| 82 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (beam, tee, angle channel or flat sections) (Fe-290 Gde E-165) including distance pieces, cleats etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender