Tender For Construction of Plant Health Clinic Building Of Horticulture Department At Pingla Sarkaghat, Distt. Mandi (Hp).
Tender Value
15.01 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
3 days left
EMD
30000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Plant Health Clinic Building Of Horticulture Department At Pingla Sarkaghat, Distt. Mandi (Hp).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation, trenches etc. in earth work in all kind of soil lifts upto 1.50 mtrs. Stacking the excavated soil not mkore than 3mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating of all surplus excavated earth as directed within all leads and lifts disposed earth to be levelled neatly dressed. |
| 2 | Providing and laying cement concrete 1:6:12 (1cement:6sand:12graded stone agregate 40mm nominal size ) and curring complete excluding cost of form work in foundation and plinth. |
| 3 | Random rubble/ploygonal rubble (uncoursed/ brought to courses) with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement: 6sand: 12graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6 (1cement: 6sand) in foundation and plinth. |
| 4 | Providing from work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shuttering strutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor two ceiling and removal of the same for instu- reinforced concrete and plain concrete work in:-(a) Foundation, footing bases of colums etc. and mass concrete. |
| 5 | b) Columns, pilasrs, post and struts, square, rectangular or polygonal in plain. |
| 6 | c) Flat surfaces such as soffits of suspended floors, roofs, landing of the like floors etc. upto 200mm in thickness. |
| 7 | d) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels not exceeding 1mtrs in depth. |
| 8 | Providing & laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in all hight. (a) Foundation footing bases of columns etc. and mass concrete. |
| 9 | b) Columns, pilasrs, posts and struts, square, rectangular or polygonal in plain. |
| 10 | c) Suspending floors roofs landing & shelves and their supports, balconies, beams, girders, bressumers and their cases (except spiral cantilever upto floor two level. |
| 11 | Providing to steel reinforcement for RCC work including bending, binding and placing in postion complete upto floor two level. |
| 12 | Prooviding wood work in frames of doors, windows, clearestory windows and other framed and fixed in postion. 1st. Class hard wood/sal wood. |
| 13 | Prooviding 40 X 3mm flat iron hold fast 40cm. Long including fixing to frame with 10mm dia bolts, nuts and wooden splug and immeging in cement concrete block 10x10x15 cms. 1:3:6 (1cement: 3sand: 6graded stone aggregate 20mm nominal size). |
| 14 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clearstorey windows including black enamelled iron butt hinges with necessary screws 40mm thick 2st. class deodar wood. |
| 15 | Providing and fixing anodized aluminium sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete. (a) 300mm x 16mm. |
| 16 | Providing and fixing aluminium tower bolts (barrel type ) anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete. (a)200x10mm. |
| 17 | (b) 150X10mm |
| 18 | (c) 100X10mm |
| 19 | Providing and fixing aluminium handle anodized transparent or dyed to required colour and shade with nacessry screws etc. complete. (a)125mm. |
| 20 | b) 100mm |
| 21 | Brick work using common clay burnt building bricks in superstructure avobe ground level in cement mortar 1:6 (1cement: 6 sand) 2nd class bricks upto all hight. |
| 22 | Half brick masonry in comman burnt clay building bricks in superstructure avobe plinth level upto floor two level with cement mortar 1:4(1cement:4 sand) 2nd class bricks |
| 23 | 6mm cement plaster in ceiling with cement mortar 1:4(1cement:4 sand). |
| 24 | 15mm cement plaster in singale coat on the rough side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand). |
| 25 | 15mm cement plaster in singale coat on the fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand). |
| 26 | Providing and fixing 10mm thick antiskid water proof stain and impact resistant heavy duty vitrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring, trade of steps and landing laid over12mm thick cement mortor 1:3 ( 1 cement:3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. |
| 27 | White glazed tile 6mm thick in skirting risers of steps and dado 12mm tick cement mortar 1:3(1cement: 3sand) and jointed with cement slurry. Kajaria/Oriented Make. |
| 28 | Providing and laying spartic ceremic tiles 5.5mm thick in flooring 300x300mm size on treads of steps laid on a bed of 12mm thick cement mortar 1:3(1cement:3sand) finished with flush pointing in white cement. |
| 29 | Providing and fixing M.S. grills of required patterns in woodan frames of windows etc. With M.S. flats, square or round bars with round headed bolts and nuts or by screws. Plain grill. |
| 30 | Providing plinth protection under layer of 75mm thick bed of dry brick/stone aggregate 40mm nominal size well ramed and consolidated and ground with fine sand including prepration of ground finished with 50mm thick cement concrete 1:3:6 (1cement:3sand :6graded stone aggregate 20mm nominal size.) and fixing oxidized M.S hooks and eyes 150mm long. |
| 31 | Appling priming coat over new wood and wood based surface after and including prepairing the surface by thoroughly cleaning oil, dirt and other foreign matters sand papered knotting. Ready mixed pain brushing wood primer pink. |
| 32 | Painting two coat (excluding priming coat) on new wood and wood based surfaces with readymixd paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter sand pepering and stopping with ready mixed paint. a) White paint. |
| 33 | Appling priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered knotting Ready mixed pain brushing red oxide/zink oxide chrome. |
| 34 | Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white. |
| 35 | Appling birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete. |
| 36 | Distempering (two coats) with oil boud washable disremper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and menufacture after thoroughly brushing the surface free from mortar dropping and other forign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. |
| 37 | Finishing wall with water proofing cement paint Apex of Asian brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. |
| 38 | Glass panes of sizes 4mm thick |
| 39 | Cutting in earth work and disposal of excavated earth upto a lead of 2km by mechanical transport. |
| 40 | Providing from work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shuttering strutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor two ceiling and removal of the same for instu- reinforced concrete and plain concrete work in:- (a) vertical surface sch as wall any thickness partition plaster and string course and like |
| 41 | Providing & laying cement concrete work 1:4:8 (1cement: 4sand: 8graded stone aggregate 25mm nominal size) and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc. |
| 42 | Providing and laying PVC pipes in weep holes. 100mm dia. |
| 43 | Stone filling behind retaining wall/ breast wall . |
| 44 | Providing and laying cement concrete work 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :- Suspended floors, roofs,. Landing and shelves and their supports, balconies beams, giders, bressumers & their cantilevers upto floor two level. |
| 45 | Cement Concrete flooring 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) laid in one layer finished with of floating coat of neat cement 40mm thick |
| 46 | Finishing with floating coat of neat cement slurry on plaster surface. |
| 47 | Providing and fixing vitreous china wash, down water closet (European type, W.C. pan) with integral `P' or S trap inlcuding jointing the trap with soil pipe in cement mortar 1:1 (1cement:1sand) (Seat and cover to be measured and paid for separately). (Ordinary Closet). |
| 48 | Providing and fixing PVC cistern 10.00 / 12.50 ltrs. capacity vitreous china low level flushing cistern with a pouir of C.I or mild steel brackets complete with fitiings. |
| 49 | Providing and fixing PVC connection. |
| 50 | Providing and fixing PVC P trap Complete in all respect 110mm |
| 51 | Providing & fixing CP stop cocks 15mm dia (Jagour/excel Make). |
| 52 | Providing & fixng PVC waste pipe for wash basin or sink 32mm dia. |
| 53 | Providing & fixing CP brass bib tap with capastan head 15mm dia. (Jaguar/Excel Make). |
| 54 | P/F brass soap dish with C.P. brass brckets fixed to wooden cleats with C.P. brass screws. |
| 55 | Providing and fixing towel rail complete with C.P. brass bracket fixed to wooden plugs with C.P. brass 600mm x 20mm. |
| 56 | Providing and fixing to wall ceiling and floor G.I. pipe (Heavy Grade) 15mm dia. With fittings and clamps i/c making good the wall, ceiling and floor |
| 57 | Providing & fixing pvc floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete i/c cost of cutting & making good the walls and floors. 100mm nominal dia. |
| 58 | Providing and fixing plastic seat(solid cover) and cover for wash down water closet with C.P. Brass hinges and rubber buffer in white plastic seat cover |
| 59 | Providing & fixing 600 x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheets or plywood sheet and fixed to wooden plugs with CP brass screws and washers of standard quality. |
| 60 | P/F zet for W.C complete in all respect |
| 61 | Providing and fixing PVC water storage tank. 500 ltrs. Capacity with all necessary fittings. |
| 62 | Providing and fixing G.I. or M.I. unions. 15mm dia. |
| 63 | Providing & laying PVC pipe 100mm dia. |
| 64 | Providing & fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings flat back 630 x450mm of reputed make. (Cera/Pariware make). |
| 65 | Providing & fixing C.P. pillar tap with capaston head. 15mm dia. |
| 66 | Providing and fixing brass full way valve with wheel 15mm nominal szie. |
| 67 | Providing & fixing 100mm sand cast iron grating for gully, floor or Nahni trap. |
| 68 | Single equal branch of required degree with oval access door, insertion rubber washer 3mm thick nut and bolt complete. 100 mm dia. |
| 69 | P/F PVC collors ISI markes i/c fixing with approved adhesive etc. complete 110mm |
| 70 | P/F PVC plain double equal branch ISI marked i/c fixing with approved adhesive etc complete 110mm |
| 71 | P/F Laboratory sink with CI or MS Bracket ppainted white i//ccutting hole and making good same but excluding fittngs vitreous china 600mmX450mmX150mm |
| 72 | P/F PVC door bend with oval access door, insertion rubber washer 3mm thick bolts & nuts ISI marked complete i/c fixing with approved adhesive etc. Complete. i)110mm dia. |
| 73 | Constructing manhole with RCC top slab in 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 (1cement: 4sand: 8graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement: 3sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) finished smooth complete including curing complete and testing. Inside size 1200 x 900mm and 1000mm deep including CI cover and frame heavy duty 560mm internal dia., total weight of cover & frame to be not less than 255Kg, with 200mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1cement: 3sand) complete. |
| 74 | Steel work welded in built up sections, trusses and framed work, i/c cutting, hosting, fixing in position and appling a priming coat of red lead paint:- (a) In trusses and trussed purlins in building. |
| 75 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gm/m² |
| 76 | Prooviding and fixing MS BP sheet 1.66mm to 2mm thick in eves board facia/soffits/ceiling i/c cutting fixing and applying a coat of red lead primer comnplete as per the instruction Engineer in-charge (base mamber of steel work shall be measured and paid separetly). |
| 77 | P/G CGI sheet roofing fixed with nuts and screws J or L hooks 8mm dia with bitumen and limpet washer complete 0.63mm thick |
| 78 | P/F on wall face PVC ( D-plast) rain water pipes for working pressure not less than 4.5 kg/ sqm i/c filling the joints with approved adhesive complete-100mm dia pipe |
| 79 | P/F m.s. holder bat clamps of approved design to CI AND SCI pipes 100mm dia |
| 80 | P/L heavy duty precast cement conc. Interlock ing paver block vibro compected 60mm thick iner locking paver block and Technical specification Clause-1504 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender