Tender For Special Repair And Maintenance Of Veterinary Hospital At Bathri, Distt. Chamba (Hp).
Tender Value
6.56 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
2 days left
EMD
13100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamba → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair And Maintenance Of Veterinary Hospital At Bathri, Distt. Chamba (Hp).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Asbestos Sheet roofing including ridges, hips, valleys and gutters etc., and stacking the serviceable material separately and unserviceable material at designated locations under all leads, complete in all respects as per the directions of the Engineer-in-Charge. |
| 2 | Demolishing stone rubble masonry in cement mortar manually or by mechanical means, including sorting and stacking of serviceable materials separately, and disposal of unserviceable materials at designated locations under all leads, complete in all respects as per the directions of the Engineer-in-Charge. |
| 3 | Demolishing nominal cement concrete of mix 1:4:8 or leaner (including equivalent design mix) manually or by mechanical means, including disposal of unserviceable material at designated locations under all leads, complete in all respects as per the directions of the Engineer-in-Charge. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) or manual means in foundation trenches or drains , including dressing of sides and ramming of bottoms, lift up to all leads, including getting out the excavated soil and disposal of surplus excavated soil at designated locations under all leads, in all kinds of soil, complete in all respects as per the directions of the Engineer-in-Charge. |
| 5 | Providing and laying in position cement concrete of specified grade, excluding the cost of centering and shuttering – All work up to plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), including curing and carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 6 | Providing and laying brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand), including curing and carriage of materials through all modes of transportation within all leads and lifts, complete as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 7 | Providing and laying brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in Superstructure in cement mortar 1:6 (1 cement : 6 coarse sand), including curing and carriage of materials through all modes of transportation within all leads and lifts, complete as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 8 | Providing and fixing centering and shuttering including strutting, propping etc. and removal of form work after completion of work, including carriage of materials through all modes of transportation within all leads and lifts, complete as per PWD specifications and as per direction of the Engineer-in-Charge. (a) Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 9 | Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc |
| 10 | Suspended floors, roofs, landings, balconies and access platform |
| 11 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - 1:2:4 (1 cement : 2 coarse sand): 4 graded stone aggregate 20 mm nominal size) including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 13 | Providing and applying 15 mm thick cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement in cement mortar 1:4 (1 cement : 4 fine sand), including curing, scaffolding and carriage of materials through all modes of transportation within all leads and lifts, complete as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 14 | Providing and applying 15 mm thick cement plaster on rough side of single or half brick wall in cement mortar 1:6 (1 cement : 6 fine sand), including curing, scaffolding and carriage of materials through all modes of transportation within all leads and lifts, complete as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 15 | Providing and fixing precoated galvanised iron profile sheets (TATADURASHINE ) (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to required size and shape, carriage of materials through all modes of transportation within all leads and lifts, complete as per PWD specifications and as per direction of Engineer-in-Charge. |
| 16 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm) including carriage of materials through all modes of transportation within all leads and lifts, complete as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 17 | Providing and fixing structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, complete in all respects, including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 18 | Providing and fixing M.S. B.P. sheet 1.66 mm to 2 mm thick in eaves board/fascia/soffits/ceiling, including cutting, fixing and welding to steel roof members and applying a coat of red lead primer, complete in all respects, excluding the cost of base members of steel work which shall be measured and paid separately, including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 19 | Providing and fixing plain multipurpose cement board (high pressure steam cured) in ceiling etc. with suitable screws for cement particle board, complete in all respects, excluding the cost of frame work which shall be measured and paid separately, using 6 mm thick cement fibre board conforming to IS:14862, including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 20 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 21 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours as approved by Engineer in charge, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete in all respects, including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 22 | Providing and fixing Ist quality ceramic glazed/ digital wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete in all respects, including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 23 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size) including carriage of materials through all modes of transportation within all leads and lifts, complete in all respects as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 24 | Providing and applying two or more coats of synthetic enamel paint of approved brand and manufacture on new work to give an even shade, including preparation of surface complete, carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 25 | Removing white or colour wash by scraping and sand papering and preparing the surface smooth, including necessary repairs to scratches etc., complete in all respects, including disposal of unserviceable material/debris, carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 26 | Providing and applying white cement based putty of approved brand and manufacturer over plastered wall surface to an average thickness of 1 mm to prepare the surface even and smooth, complete in all respects, including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 27 | Providing and applying oil bound washable distemper of approved brand and manufacture to give an even shade on new work, two or more coats over and including water thinnable priming coat with cement primer, complete in all respects, including preparation of surface, carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 28 | Providing and applying two or more coats of acrylic emulsion paint of approved brand and manufacture on new work to give an even shade, including preparation of surface complete, carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 29 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 30 | Providing and fixing high pressure PVC spigot and socketwaste and ventilating pipes ISI marked confroming to IS : 13592 Type A, i/c fixing with approved adhesive etc. complete. 110mm diameter including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 31 | Providing and fixing on wall face PVC accessories rain water pipes including filling the joints with approved adhesive complete 110mm diameter including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. (a) plain Bend 110 mm |
| 32 | (b) Single tee without door |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing Internal work 20 mm nominal outer dia Pipes. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge |
| 34 | Providing and fixing PVC floor trap ISI marked of self cleaning design i/c fixing with approved adhessive cost of cutting and making good the wall and floors etc. 110mm x 90mm including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 35 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 36 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 37 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 38 | Poviding and fixng vitrous china pedestal for wash basin complete recessed at the back for reception of pipe and fittings including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 39 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 40 | Providing and fixing 100m stainless steel grating forgully,foor or Nahani trap including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 41 | Providing and fixing 600x450mm bevelled edge mirror of superior glass mounted on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with CP brass screw and washers including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 42 | Providing and fixing PTMT towel rail complete with CP brass brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 43 | Providing and fixing CP brass bib tap with capastan head 15 mm dia including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 44 | Providing and fixing CP stop cock 15mm dia including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 45 | Providing and fixing PVC connection pipe with brass unions 45 cms length 15mm nominal size including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 46 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 47 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 48 | Providing and fixing 100 mm dia PVC cowl of approved make over septic tank vent pipe including necessary fittings, solvent cement, clamps and fixing arrangement complete in all respects as required including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 49 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 50 | Providing and fixing 20 mm dia CPVC brass ball valve with CPVC ends of approved make complete as required including carriage of materials through all modes of transportation within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-Charge. |
| 51 | Constructing Manhole with RCC top slab 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) mixture foundation concrete1:4:8 (1cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing all complete as per standard design: with Pre-cast R.C.C. Cover and frame(heavy duty HD- 20 grade designation) 560mm internal diameter conforming to I.S.12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominalsize) including centering, shuttering all complete Inside size 800 x 800mm and 500mm deep With 200 mm thick walls of RCC 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including complete formwork and reinforcement with 10 mm bars not exceeding 150 mm C/C both Ways in walls, bed & Slab including carriage of material with in all lead and lifts. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender