Tender For Construction Of Sub Divisional Veterinary Hospital Building At Haroli Distt. Una (Hp).
Tender Value
99.97 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
4 days left
EMD
2 Lakhs
Bank guarantee accepted
Document Fee
2400
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Una → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Sub Divisional Veterinary Hospital Building At Haroli Distt. Una (Hp).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in earth work in all heights and depth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification |
| 2 | Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 40mm nominal size) and curing complete including cost of form work in:Foundation and plinth and wall including carriage of materials upto all leads and lifts. |
| 3 | Providing form work with steel plates 3.15 mm( three decimal fifteen millimeter ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in including carriage of materials upto all leads and lifts. (a) Foundations, footings & bases of columns etc., Pedestal of columns and mass concrete. |
| 4 | columns, pillars, posts and struts square rectangular or polygonal in plan in any height |
| 5 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 6 | Suspended floors, roofs, landings, balconies, fecia ,bottom of beam, moulding and access platform |
| 7 | Stair cases with slopping or stepped soffits including landings etc. |
| 8 | Edges of slab, chajjas etc. |
| 9 | Vertical surfaces such as walls (any thickness) partitions and like i/c attached buttresses, pillasters, plith and string courses and the liike |
| 10 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (a) All works upto plinth level |
| 11 | All works above plinth level upto floor V level |
| 12 | Providing and laying tor steel reinforcement for reinforced cement concrete work including ,bending binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge . |
| 13 | Providing Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (1 Cement : 6 Sand) upto all height 1st Class Bricks including carriage of material within all leads and lifts. |
| 14 | Providing Brick work using common burnt clay building bricks in superstructure 1:6 (1cement:6sand) up to all height including carriage of material within all leads, lifts and heights. 1st class bricks. |
| 15 | Providing and Fixing Factory Fabricated powder coated in wooden shade GI glazed Windows, Doors, ventilators and Glazinging of made out Galvanised Steel Sections 1.20mm thickness Double Rebate, single rebate and Stainless steel Grill (SS 304), comprising openable glazed shutters fitted with 5mm thick clear glass , mosquito mesh shutters with SS wire mesh and other portion of Windows fixed glazed panel with double glass 5mm thick clear including all GI section, Glazing beads,rubber gaskets, hinges, handles, tower bolts, locking arrangements, holdfasts,screws,nuts,bolts,welding,cutting,fabrication,erection and fixing in positioncomplete in all respects as per approved design and direction of Engineer-in-Charge. (a) Frame Double Pattam size 150mm |
| 16 | Frame Single Pattam size 100mm |
| 17 | Solid Glass leaf |
| 18 | Mosquito net leaf for windows ,ventilators and Glazing |
| 19 | Fixed Glass |
| 20 | Solid leaf |
| 21 | Mosquito net leaf for Doors |
| 22 | 6mm (Six milimetre) cement plaster to ceiling in cement mortar 1:3 (One Cement is to three Sand) in all floor level. The rate isincluding carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. |
| 23 | 15mm (fifteen milimetres) thick cement plasters in single coat on rough/fair side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. |
| 24 | Providing and fixing Alkali-Resistant (AR) Fiberglass Mesh (145 GSM, 5mm x 5mm grid size) over joints between distinct structural surfaces (such as RCC columns/beams and masonry brickwork/AAC blockwork) to prevent shrinkage cracks. |
| 25 | Applying Birla white wall care putty two coats over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of materials upto all leads and lifts. |
| 26 | Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. including carriage of materials upto all leads and lifts. |
| 27 | Finishing walls with textured exterior paint of required shade :New work (Two or more coat applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including carriage of materials upto all leads and lifts. |
| 28 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters:- With white enamel paint.or other than white including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. |
| 29 | Providing and fixing double charge 10mm thick anti skid water proof stain and impect resistent heavy duty and Mat Finish vetrified tiles Nitco or equivalant 800mmx800mmx10mm manufactured of required shade and colour in flooring, treads of steps and landings laid with spacers laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) and jointed with grouting of Epoxy material mixed with pigment to match the shade of tiles in all storeys, height, levels and location as required complete.including carriage of materials upto all leads and lifts. |
| 30 | Providing and laying Polished Granite stone flooring ,walls and sills in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge including carriage of materials upto all leads and lifts |
| 31 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. including carriage of materials upto all leads and lifts. |
| 32 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of materials upto all leads and lifts. |
| 33 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25mm thick. |
| 34 | Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paintIn gratings framed guard bars,ladders,railling,brackets and similar works.including carriage of materials upto all leads and lifts. |
| 35 | Providing and fxing Stainless steel (Grade-304) railing made of hollow tubes, channels, plates etc. i/c welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, as per drawing on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in charge. including carriage of materials upto all leads and lifts. |
| 36 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) including earth work in excavation with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 900mm x 800mm and 450mm deep including precast RCC manhole Cover and frame of required shape and approved quality HD 20 Circular shape 560 mm internal diameter ( heavy duty test load 20MT as per IS 12592 Part I & II ) With 230mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3) including carriage of materials within all leads and lifts |
| 37 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 15 mm nominal outer dia Pipes. including carriage of materials upto all leads and lifts. |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 20 mm nominal outer dia Pipes. including carriage of materials upto all leads and lifts. |
| 39 | Providing and fixing to wall ceilling and floor galvainised mild steeel tubes(medium grade)tube fittings and clamps including making good the wall 25 mm nominal bore. including carriage of materials upto all leads and lifts. |
| 40 | Providing and fixing high pressure PVC 4.5 kg/sqm pressure spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm dia.including carriage of materials upto all leads and lifts. |
| 41 | Providing and fixing high pressure PVC 4.5 kg/sqm pressure spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. Complete 150 mm dia including carriage of materials upto all leads and lifts. |
| 42 | Providing and fixing PVC accessiries ISI marked including fixing with approved adhesive etc. complete.Plain bend 110 mm nominal size. including carriage of materials upto all leads and lifts. |
| 43 | Providing and fixing PVC accessiries ISI marked including fixing with approved adhesive etc. complete. Door bend 110 mm nominal size. including carriage of materials upto all leads and lifts. |
| 44 | Providing and fixing PVC accessiries ISI marked including fixing with approved adhesive etc. complete.Plain Tee 110 mm nominal size. including carriage of materials upto all leads and lifts. |
| 45 | Providing and fixing pvc cowl 110mm dia including carriage of materials upto all leads and lifts. |
| 46 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm including carriage of materials upto all leads and lifts. |
| 47 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, GI inlet connection for flush including flush pipe, with manually controlled device (handle lever), Zet with stop cock ,conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 48 | Providing and fixing wash basin including with C.I. brackets, 15 mm C.P. brass pillar taps, CP coupling ,32 mm PVC waste of standard pattern,PVC connection pipe 30cm length , concealed and 15mm CP stop cock including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap and stop cock including carriage of material within all leads and lifts. |
| 49 | Providing and fixing viterous china pedestal for wash basin complete recessed at the back for the recption of pipes and fittings including carriage of materials upto all leads and lifts. |
| 50 | Providing and fixing brass concealed of standard design and of approved make conforming to IS:8931.15 mm dia. including carriage of material within all leads and lifts. |
| 51 | Providing and fixing 100mm dia. Stainless steel grating for gully,foor or Nahani trap including carriage of material within all leads and lifts.. |
| 52 | Providing and fixing 600x450mm bevelled edge mirror of superior glass mounted on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with CP brass screw and washers including carriage of material within all leads and lifts. |
| 53 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden pluges with CP brass screws 600x20mm including carriage of material within all leads and lifts. |
| 54 | Providing and fixing CP brass bib tap with capastan head 15 mm dia. including carriage of material within all leads and lifts. |
| 55 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm dia. including carriage of material within all leads and lifts. |
| 56 | Providing and fixing brass full way valve with wheel 20mm nominal bore including carriage of materials upto all leads and lifts. |
| 57 | Providing and fixing brass full way valve with wheel 25mm nominal bore including carriage of materials upto all leads and lifts. |
| 58 | Providing and fixing CPVC or GI or MI union15mm nominal size including carriage of materials upto all leads and lifts. |
| 59 | Providing and fixing CPVC or GI or MI union20mm Nominal size including carriage of materials upto all leads and lifts. |
| 60 | Providing and fixing CPVC or GI or MI union25mm Nominal size including carriage of materials upto all leads and lifts. |
| 61 | Providing and fixing charomium plated brass soap dish with C.P.brass brackets fixed to wooden cleats with C.P. brass screws including carriage of material within all leads and lifts. |
| 62 | Providing and fixing statinless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings 610 x460 mm with bowl depth 200 mm. including carriage of materials upto all leads and lifts. |
| 63 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :Size 600x450x200 mm including carriage of materials upto all leads and lifts. |
| 64 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.including necessary fittings including carriage of material within all leads and lifts. |
| 65 | Excavation in earth work and banking in 20 cm. layers including breaking clods, ramming and dressing ground for the purpose of making embankment or filling up ground depressions upto all leads and lift including carriage of materials upto all leads and lifts. |
| 66 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in Charge 80mm thick inter locking blocks sqm including carriage of materials upto all leads and lifts. |
| 67 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: cement concrete 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including carriage of materials upto all leads and lifts. |
| 68 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm, including carriage of material with in all lead and lifts. |
| 69 | Providing 10mm thick Plaster of paris (gypsem) unhydous ceiling up to all height of 5 mtrs. Above floor level over aluminium coated strips 50mm wide in between and reinforced with rabbit wire mesh fixed to aluminium coated frame complete in all respect. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender