Tender For Srmo Sales Building And Construction Of He & She Toilet Block And Septic Tank At Petrol Pump Hpscsc Ltd. Gagret Distt. Una (Hp).
Tender Value
9.11 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
5 days left
EMD
18200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Una → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Srmo Sales Building And Construction Of He & She Toilet Block And Septic Tank At Petrol Pump Hpscsc Ltd. Gagret Distt. Una (Hp).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in earth work in all heights and depth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification |
| 2 | Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in:Foundation and plinth and wall including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.. |
| 3 | Providing form work with steel plates 3.15 mm( three decimal fifteen millimeter ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.. (a) Foundations, footings & bases of columns etc., Pedestal of columns and mass concrete. |
| 4 | Vertical surfaces such as walls (any thickness) partitions and like i/c attached buttresses, pillasters, plith and string courses and the liike |
| 5 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 6 | Suspended floors, roofs, landings, balconies, fecia ,bottom of beam, moulding and access platform |
| 7 | Edges of slab, chajjas etc. |
| 8 | Providing and laying cement concrete 1:1.5:3 (One cement : one point five sand :Three graded crushed stone aggregate 20mm nominal size)( Twenty milimetre) and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete workFoundations, footings, bases of columns and the like and mass concrete. including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.. |
| 9 | Providing and layingReinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. including carriage of materials upto all leads and lifts. |
| 10 | Providing and laying Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, fecia ,mouldings, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. including carriage of materials upto all leads and lifts. |
| 11 | Providing and laying tor steel reinforcement for reinforced cement concrete work including ,bending binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge . |
| 12 | Providing Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (1 Cement : 6 Sand) upto all height 1st Class Bricks including carriage of material within all leads and lifts. |
| 13 | Providing Brick work using common burnt clay building bricks in superstructure 1:6 (1cement:6sand) up to all height including carriage of material within all leads, lifts and heights. 1st class bricks and as per the direction of Engineer-in-Charge.. |
| 14 | Providing and Fixing Factory Fabricated powder coated in GI glazed Windows, Doors, ventilators and Glazinging of made out Galvanised Steel Sections 1.20mm thickness Double Rebate, single rebate and Stainless steel Grill (SS 304), comprising openable glazed shutters fitted with 5mm thick clear glass , mosquito mesh shutters with SS wire mesh and other portion of Windows fixed glazed panel with double glass 5mm thick clear including all GI section, Glazing beads,rubber gaskets, hinges, handles, tower bolts, locking arrangements, holdfasts,screws,nuts,bolts,welding,cutting,fabrication,erection and fixing in positioncomplete in all respects as per approved design and direction of Engineer-in-Charge. (a) Frame Double Pattam size 150mm |
| 15 | Frame Single Pattam size 100mm |
| 16 | Solid Glass leaf |
| 17 | Mosquito net leaf for windows ,ventilators and Glazing |
| 18 | Fixed Glass |
| 19 | Solid leaf |
| 20 | 6mm (Six milimetre) cement plaster to ceiling in cement mortar 1:3 (One Cement is to three Sand) in all floor level. The rate isincluding carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. |
| 21 | 15mm (fifteen milimetres) thick cement plasters in single coat on rough/fair side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. |
| 22 | Repairs to plaster of thickness 12mm to20mm in patches of area 2.5 sq.meters and under, including cutting hepatchinproper shape, rakingout jointsand preparing and plastering the surface of the walls complete, includingdisposal of rubbish to thedumping ground, all complete as per direction of Engineer-in Charge.Withcementmortar 1:4(1cement : 4 fine sand) |
| 23 | Applying Birla white wall care putty two coats over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. |
| 24 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.. |
| 25 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth and cement primer complete. including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. |
| 26 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters:- With white enamel paint.or other than white including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. |
| 27 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. including carriage of materials upto all leads and lifts. |
| 28 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of materials upto all leads and lifts. |
| 29 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete size of Tile 600x600 mm |
| 30 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 15 mm nominal outer dia Pipes. including carriage of materials upto all leads and lifts. |
| 31 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 20 mm nominal outer dia Pipes. including carriage of materials upto all leads and lifts. |
| 32 | Providing and fixing to wall ceilling and floor galvainised mild steeel tubes(medium grade)tube fittings and clamps including making good the wall 2 mm nominal bore. including carriage of materials upto all leads and lifts. |
| 33 | Providing and fixing high pressure PVC 4.5 kg/sqm pressure spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm dia.including carriage of materials upto all leads and lifts. |
| 34 | Providing and fixing PVC accessiries ISI marked including fixing with approved adhesive etc. complete.Plain bend 110 mm nominal size. including carriage of materials upto all leads and lifts. |
| 35 | Providing and fixing PVC accessiries ISI marked including fixing with approved adhesive etc. complete. Door bend 110 mm nominal size. including carriage of materials upto all leads and lifts. |
| 36 | Providing and fixing PVC accessiries ISI marked including fixing with approved adhesive etc. complete.Plain Tee 110 mm nominal size. including carriage of materials upto all leads and lifts. |
| 37 | Providing and fixing pvc cowl 110mm dia including carriage of materials upto all leads and lifts. |
| 38 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm including carriage of materials upto all leads and lifts. |
| 39 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) including W.C. pan with ISI marked white solid plastic seat and lid, 10 litre low level PVC flushing cistern with GI inlet connections ,PVC connection pipe 30cm length ,seat and cover , stop cock with zet , stop cock with flushing cistern and P or S trap including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors. |
| 40 | Providing and fixing wash basin including with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm PVC waste of standard pattern,PVC connection pipe 30cm length , concealed and 15mm CP stop cock including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap and stop cock including carriage of material within all leads and lifts and as per the direction of Engineer-in-Charge. |
| 41 | Providing and fixing viterous china pedestal for wash basin complete recessed at the back for the recption of pipes and fittings including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. |
| 42 | Providing and fixing 100mm dia. Stainless steel grating for gully,foor or Nahani trap including carriage of material within all leads and lifts and as per the direction of Engineer-in-Charge. |
| 43 | Providing and fixing 600x450mm bevelled edge mirror of superior glass mounted on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with CP brass screw and washers including carriage of material within all leads and lifts and as per the direction of Engineer-in-Charge. |
| 44 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden pluges with CP brass screws 600x20mm including carriage of material within all leads and lifts and as per the direction of Engineer-in-Charge. |
| 45 | Providing and fixing CP brass bib tap with capastan head 15 mm dia. including carriage of material within all leads and lifts and as per the direction of Engineer-in-Charge. |
| 46 | Providing and fixing CP stop cock 15mm dia including carriage of material within all leads and lifts and as per the direction of Engineer-in-Charge. |
| 47 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore and as per the direction of Engineer-in-Charge. |
| 48 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete 25 mm nominal bore and as per the direction of Engineer-in-Charge. |
| 49 | Providing and fixing charomium plated brass soap dish with C.P.brass brackets fixed to wooden cleats with C.P. brass screws including carriage of material within all leads and lifts and as per the direction of Engineer-in-Charge. |
| 50 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.including necessary fittings including carriage of material within all leads and lifts and as per the direction of Engineer-in-Charge.. |
| 51 | Dismantling doors, windows , Rolling shutter and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below and as per the direction of Engineer-in-Charge. |
| 52 | Demolishing cement concrete manually/ by mechanical means including disposal of materials with in in all leads and lifts and as per the direction of Engineer-in-Charge.. |
| 53 | Providing and fxing Stainless steel (Grade-304) railing made of hollow tubes, channels, plates etc. i/c welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, as per drawing on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in charge. including carriage of materials upto all leads and lifts. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender