Tender For Raising The Height Of Veranda And Plinth Protection Of Shed, Minor Repair Of Shed And Office And Miscellaneous Item Etc. At Civil Supply Godown Jalgran Distt. Una (Hp).
Tender Value
9.38 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
10 days left
EMD
18800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Una → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Raising The Height Of Veranda And Plinth Protection Of Shed, Minor Repair Of Shed And Office And Miscellaneous Item Etc. At Civil Supply Godown Jalgran Distt. Una (Hp).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in earth work in all heights and depth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification |
| 2 | Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in:Foundation and plinth and wall etc. including carriage of materials upto all leads and lifts and as per direction of Engineer-in-Charge. |
| 3 | Providing form work with steel plates 3.15 mm( three decimal fifteen millimeter ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in including carriage of materials upto all leads and lifts Vertical surfaces such as walls (any thickness) partitions and like i/c attached buttresses, pillasters, plith and string courses and the liike including carriage of materials upto all leads and lifts and as per direction of Engineer-in-Charge. |
| 4 | Providing and laying cement concrete 1:3:6 (1 cement:3 sand:6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in:Foundation and plinth and wall etc. including carriage of materials upto all leads and lifts and as per direction of Engineer-in-Charge. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level and above plinth level :1:2:4 (1 cement : 2 coarse sand): 4 graded stone aggregate 20 mm nominal size) Foundations, footings & bases of columns etc., and mass concrete, columns , walls, plinth beams beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, fecia ,staircases and spiral stair cases above plinth level up to floor five level, and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. including carriage of materials upto all leads and lifts. |
| 6 | Providing and laying tor steel reinforcement for reinforced cement concrete work including ,bending binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge . |
| 7 | filling under floors complete as per drawings & technical specification Clause 1204.3.8 Granular material and as per direction of Engineer-in-Charge. |
| 8 | Painting two coats (including priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters:- With white enamel paint.or other than white including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. |
| 9 | Supplying and fixing rolling shutters of approved make, made of required size G.I. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and G.I. top cover of required thickness for rolling shutters 80x0.90or Ms laths with 0.90 mm thick top cover and as per direction of Engineer-in-Charge. |
| 10 | Providing and Fixing ball bearing for rolling shutters and as per direction of Engineer-in-Charge. |
| 11 | Dismantling doors, windows , Rolling shutter and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below and as per direction of Engineer-in-Charge. |
| 12 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar and as per direction of Engineer-in-Charge. |
| 13 | Repairs to plaster of thickness 12mm to20mm in patches of area 2.5 sq.meters and under, including cutting hepatchinproper shape, rakingout jointsand preparing and plastering the surface of the walls complete, includingdisposal of rubbish to thedumping ground, all complete as per direction of Engineer-in Charge.Withcementmortar 1:4(1cement : 4 fine sand) |
| 14 | Providing and Fixing Factory Fabricated powder coated in wooden shade GI glazed Windows, Doors, ventilators and Glazinging of made out Galvanised Steel Sections 1.20mm thickness Double Rebate, single rebate and Stainless steel Grill (SS 304), comprising openable glazed shutters fitted with 5mm thick clear glass , mosquito mesh shutters with SS wire mesh and other portion of Windows fixed glazed panel with double glass 5mm thick clear including all GI section, Glazing beads,rubber gaskets, hinges, handles, tower bolts, locking arrangements, holdfasts,screws, nuts,bolts,welding,cutting,fabrication,erection and fixing in positioncomplete in all respects as per approved design and direction of Engineer-in-Charge. (a) Frame Double Pattam size 150mm |
| 15 | (b) Solid Glass leaf |
| 16 | © Mosquito net leaf for windows ,ventilators and Glazing |
| 17 | (d) Solid leaf |
| 18 | (e) Mosquito net leaf for Doors |
| 19 | Providing and fxing Stainless steel (Grade-304) railing made of hollow tubes, channels, plates etc. i/c welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, as per drawing on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in charge. including carriage of materials upto all leads and lifts and as per direction of Engineer-in-Charge. |
| 20 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 21 | White washing with lime to give an even shade upto all height New work Two coats complete in all respect. |
| 22 | Applying Birla white wall care putty two coats over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of materials upto all leads and lifts. |
| 23 | Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. including carriage of materials upto all leads and lifts and as per direction of Engineer-in-Charge. |
| 24 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth and cement primer complete. including carriage of materials upto all leads and lifts and as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
TodaySep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender