Tender For Construction of New Emporium Under Chcds Project Hp State Handicraft & Handloom Corporation Ltd., At Bilaspur, Distt. Bilaspur (Hp).
Tender Value
43.82 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
4 days left
EMD
88000
Bank guarantee accepted
Document Fee
2400
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bilaspur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of New Emporium Under Chcds Project Hp State Handicraft & Handloom Corporation Ltd., At Bilaspur, Distt. Bilaspur (Hp).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by machnical means( Hydraulic exczvztor/ manual means in foundation, trenches etc. in earth work in all kind of soil lifts upto 1.50 mtrs. Stacking the excavated soil not more than 3 mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed upto 5KM leads and as per direction of Engineer-in-Charage. |
| 2 | Providing & laying cement concrete 1:4:8 (1cement: 4sand: 8graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in walls and as per direction of Engineer-in-Charage. |
| 3 | Providing from work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shuttering strutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor two ceiling and removal of the same for instu- reinforced concrete and plain concrete work and as per direction of Engineer-in-Charage in:- (a) Foundation, footing bases of colums etc. and mass concrete. |
| 4 | b) Columns, pilasrs, post and struts, square, rectangular or polygonal in plain. up to floor two level |
| 5 | c) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels not exceeding 1mtrs in depth. |
| 6 | d) flat surface such as soffit of suspended floor roof landing up to floor two level |
| 7 | e) vartical surface such as wall any thickness for septic tank wall |
| 8 | Providing & laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in all hight and as per direction of Engineer-in-Charage.. a) Foundation footing bases of columns etc. and mass concrete . Qtrs/bull shed |
| 9 | b) Columns, pilasrs, posts and struts, square, rectangular or polygonal in plain. up to floor two level |
| 10 | c) Suspending floors roofs landing & shelves and their supports, balconies, beams, girders, bressumers and their cases (except spiral cantilever upto floor two level. |
| 11 | Providing tor steel reinforcement for RCC work including bending, binding and placing in postion complete upto floor two level and as per direction of Engineer-in-Charage. |
| 12 | filling abailable excavated earth ( excluding rock) in tranches , plinth, sides of foundation etc. in layer not exceeding 20cm in depth consolidating each deposite layer by ramming and watering lea up to 50 m and lift up to 1.5 m and as per direction of Engineer-in-Charage. |
| 13 | Brick work using common clay burnt building bricks in superstructure avobe ground level in cement mortar 1:6 (1cement: 6 sand) 1st class bricks upto all hight and as per direction of Engineer-in-Charage. |
| 14 | Providing and fixing precoated galvenised iron profile sheet ( size ,shape and pitch of carrugation as approved by 0.50 mm (+0.05%) total coated thickness 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zink coated 120 gram per Sqm as per IS: 277in 240 mpa steel grade 5-7 microns epoxy primer on both side of sheet sheet With top coat of regular modified polyster(RNP)organic coating of 20 microns over 5microne primer coating to Back coat of polyster of 5 microns over 5 microne primer coating i/c fixing with prepainted iron J or L hooks,bolts And nuts 6mm dia meters with prepainted limpet and rubber washer complete with all assesories as required as Per the direction of Engineer in charge. |
| 15 | Providing and fixing precoated galvenised steel sheet roofing accessaries 12.51.1 Ridges plain (500-600mm) and as per direction of Engineer-in-Charage. |
| 16 | Steel work welded in built up sections, trusses and framed work, i/c cutting, hosting, fixing in position and appling a priming coat of red lead paint and as per direction of Engineer-in-Charage.:- (a) In trusses and trussed purlins in building. |
| 17 | (b) gretting frames guard bar ladder railing brackets and similar work |
| 18 | Providing and fixing M.S. B.P sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling i/c cutting fixing & welding to steel roof members & appling a coat of red lead primer complete as per the instruction of Engineer incharge.( base mambers of steel work shall be measured & paid sepertely. |
| 19 | Prooviding wood work in frames of doors, windows, clearestory windows and other framed and fixed in postion. 1st. Class hard wood/sal wood and as per direction of Engineer-in-Charage. |
| 20 | Prooviding 40 X 3mm flat iron hold fast 40cm. Long including fixing to frame with 10mm dia bolts, nuts and wooden splug and immeging in cement concrete block 10x10x15 cms. 1:3:6 (1cement: 3sand: 6graded stone aggregate 20mm nominal size). |
| 21 | Providing & fixing panelled glazed or panelled and glazed shutters for doors windows and clearstory windows including black enamelled iron butt hinges with necessary screws. 35mm thick Ist. Class Deodar Wood. |
| 22 | Providing and fixing wire guage shuter using galvanised m.S> wire guage of I.S. guage designation 85G with wire of dia 0.56mm for door windows and clearstory windows with necessary screws 30 mm thick second class deodar wood |
| 23 | Providing & fixing aluminium sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete (i) 300mm x 16mm. |
| 24 | Providing and fixing aluminium tower bolts (barrel type ) anodized transparent or dyed to required shade & colour.(a)200 x 10mm |
| 25 | (b) 150x10mm |
| 26 | Prooviding and fixing aluminium finshed brass handles with nuts and secrews etc complete. (a) 125mm. |
| 27 | Providing and fixing oxidized MS hooks and eyes 250mm |
| 28 | P/F 100mm bright finished brass floor door stopper with rubber cushion screws etc to suit shutter thickness complete |
| 29 | P/F bright finished door closer 150mm |
| 30 | Providing and fixing M.S. grills of required patterns in woodan frames of windows etc. With M.S. flats, square or round bars with round headed bolts and nuts or by screws. Plain grill. |
| 31 | 15mm cement plaster in singale coat on the rough side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand). |
| 32 | 15mm cement plaster in singale coat on the fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand). |
| 33 | 6mm cement pilaster in single coat of ceilling in cement mortar 1:4 (1 cement:4 sand) and as per direction of Engineer-in-Charage. |
| 34 | Providing and fixing in position collapsible shutter with vertical channel 200x10x2mm and braced with flat iron daigonal 20x5mm size with top and bottom rail of T iron 40x40x6mm with 38mm dia steel pulley complete with bolts and nuts and locking arrangement stopper handle including applying primer coat of red lead paint. |
| 35 | Providing and fixing 10mm thick antiskid water proof stain and impact resistant heavy duty vitrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring, trade of steps and landing laid over12mm thick cement mortor 1:3 ( 1 cement:3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. |
| 36 | P/L ceremic glazed floor tile 300x300 mm thickness to be specified by the manufacture) of 1st quality conferming to IS : 15622 of approved make in colour such as white Ivory, gray fume red brown,laid on 20mm tick cement mortar 1:3(1cement: 3sand) and jointed with cement slurry. Kajaria/Oriented Make and as per direction of Engineer-in-Charage. |
| 37 | Providing plinth protection under layer of 75mm thick bed of dry brick/stone aggregate 40mm nominal size well ramed and consolidated and ground with fine sand including prepration of ground finished with 50mm thick cement concrete 1:3:6 (1cement:3sand :6graded stone aggregate 20mm nominal size.) and fixing oxidized M.S hooks and eyes 150mm long. |
| 38 | Appling birla white putty of approved brand and manufacture on wall surface. surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete. |
| 39 | Appling priming coat over new wood and wood based surface after and including prepairing the surface by thoroughly cleaning oil, dirt and other foreign matters sand papered knotting. Ready mixed pain brushing wood primer pink. |
| 40 | Painting two coat (excluding priming coat) on new wood and wood based surfaces with readymixd paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter sand pepering and stopping with ready mixed paint. |
| 41 | Appling priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered knotting Ready mixed pain brushing red oxide/zink oxide chrome. |
| 42 | Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white. |
| 43 | Distempering (two coats) with oil boud washable disremper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and menufacture after thoroughly brushing the surface free from mortar dropping and other forign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. |
| 44 | Finishing wall with water proofing cement paint Apex of Asian brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. |
| 45 | P/F on wall face unplasticied Rigid PVC rain water pipe conferming to IS: 13592 Type-A i/c jointing with seal ring conferming to IS:5382 leaving 10mm gap for thermal expension, (i) single socketed pipes 110mm |
| 46 | P/F on wall face unplasticied Rigid PVC moulded fittings accesseries for rain water pipe conferming to IS: 13592 Type-A i/c jointing with seal ring conferming to IS:5382 leaving 10mm gap for thermal expension, (i) single socketed pipes 110mm plain bend 110mm |
| 47 | P/F m.s. holder bat clamps of approved design to CI AND SCI pipes 100mm dia |
| 48 | P/F white vitrous china pedestal Type water closet squatting pan ( European type WC pan ) with seat and lid, 10litrs low level white PVC flushing cistern, i/c flush pipe with manually controlled device ( handle lever) conferming to IS:7231 with all fittings and fixture complete ( earth work , bed conc. Foot rest and trap to be measured and paid for separetaely W.C pan with ISI marked white solid pilastic seat and lid. |
| 49 | P/F PVC P'S' trap for water closet ( aquatting pan) ISI marked i/c jointing the trap with the pan and PVC pipe with approved adhesive etc. complete. |
| 50 | P/F vitrous china wash basin with single holes for piller tap with C.I or M.S brackets painted white i/c cutting holes and making good the same but excluding fittings 630x450mm |
| 51 | Providing and fixing PVC connection 45cm length 15mm dia. |
| 52 | Providing & fixing 600 x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheets or plywood sheet and fixed to wooden plugs with CP brass screws and washers of standard quality. |
| 53 | P/F chromium plated brass soap dish with brackets fixed to wooden cleats with C.P Brass screw. |
| 54 | Providing and fixing towel rail complete with C.P. brass bracket fixed to wooden plugs with C.P. brass 750mm x 20mm. |
| 55 | Providing & fixing CP brass bib tap with capastan head 15mm dia. (Jaguar/Excel Make) and as per direction of Engineer-in-Charage.. |
| 56 | Providing & fixing CP stop cocks 15mm dia (Jagour/excel Make) and as per direction of Engineer-in-Charage.. |
| 57 | Providing & fixing C.P. pillar tap with capaston head. 15mm dia. |
| 58 | Providing & fixng PVC waste pipe for wash basin or sink 32mm dia. |
| 59 | P/F 100mm sand cast iron grating for gully floor or nahani trap and as per direction of Engineer-in-Charage. |
| 60 | P/F GI pipes complete with Gi fittings and clamps i/c making good the wall etc, concealed pipe i/c painting with anti corrosive bitumen making good wall 15mm dia nominal bore |
| 61 | Providing & fixing pvc floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete i/c cost of cutting & making good the walls and floors. 100mm nominal dia. |
| 62 | P/F 8mm dia CP/SS jet with flexible tube up to 1.00 mtr long for European WC sheet |
| 63 | P/F soil waste and ventilating pipees :- 100mm dia PVC pipe |
| 64 | P/F PVC accesseries :- (a) P/F SCI plain bend 100mm |
| 65 | b) P/F double equal branch 100x100x100mm |
| 66 | c) P/F single equal plain junction 100x100x100mm |
| 67 | d) P/F coller 100mm |
| 68 | P/F PVC water storage tripal core tank 1000 lltr capacity complete in all respect and as per direction of Engineer-in-Charage. |
| 69 | Constructing Man holes with RCC top slab 1:2:4 ( 1cement @ sand :4 graded stone agg 20mm nominal size foundation conc 1:4:8 in side plastring 1:3 in side size 800x800 500mmdeep 200mm thick brick wall in cement mortar 1:3 ( 1cement :3sand ) |
| 70 | Cement conc. Flooring 1:2:4 ( 1 cement: 2 sand :4 graded stone agg. 20 mm nominal size laid in one layer finished in neat coat of cement slurry 40mm thick |
| 71 | Demolition Brick work manually/ by mechnical means i/c stacking of serviceable materials and disposal of unserviceable maretials with in 50mtr lead as per direction of Engineer in charge i/c Mud mortar |
| 72 | Demolition cement conc.manual/ mechnical means above G.L up to floor two level i/c stacking serviceable materials and disposal of un serviceable materials up to 20 mtr lead |
| 73 | Demolition RCC work manual/ mechnical means above G.L up to floor two level i/c stacking serviceable materials and disposal of un serviceable materials up to 20 mtr lead Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender