Tender For Hotmixing Of Rural Road At Udalshem [Id No 67631] Navem [Id No 67637] And Kumbharwada [Id No 67639] For A Length Of 5.625 Kms In V.P. Sancordem Of Sanvordem Constituency In Dharbandora Taluka.
Tender Value
1.61 Crore
Estimated cost
Bid Submission
21 Sep 2026
6 days left
EMD
3.23 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Hotmixing Of Rural Road At Udalshem [Id No 67631] Navem [Id No 67637] And Kumbharwada [Id No 67639] For A Length Of 5.625 Kms In V.P. Sancordem Of Sanvordem Constituency In Dharbandora Taluka.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation for roadway in all types of strata comprising any of the materials such as soil, silt, clay gravel murrum of all varieties shingles pebbles all types of conglomerates, laterite rock, ordinary soft rock, disintegrated rock fissured rock shuttered decomposed rock or weathered rock and all such other materials as described under Appendix \\"A\\" to those specification either in full or parts as the case may be by mechanical means or any other approved means including cutting and pushing the earth to site of embankment, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections. as per MoRT & H Specification 301 or adopting any approved method or method as the case may be convenient or permitted inclusive of chiselling, wedging blasting prohibited etc. in all conditions such as dry moist saturated submerged foul conditions including shoring strutting etc. and as directed by the Engineer in - charge including dressing of sides ramming of bottoms including getting out the excavated soft/rock to be levelled & neatly dressed including pumping and bailing of water, carriage and disposal of excavated material barricading danger lighting guarding and disposal of excavated earth as directed by the Engineer - in Charge including all leads and lifts etc. complete. |
| 2 | Providing and laying 50mm (con solidated thickness)full grout using granitic or basaltic stone of specified grading at 6.00 cu.m. per 100 sq.m. grouting with hot bitumen straight run bitumen(or with such bituminous material of grade and type as specified by the Engineer-in -Charge)at 5.0kg. per sq. m. binding with key aggregate of granitic or basaltic stone of specified grading at 1.5 cu.m. per 100 sq.m. including Providing and laying seal coat sealing the voids in a bituminious surface laid with F.E loader with 1 Cu. m. bucket capacity to the specified levels grade and cross fall using Type A seal coat with 0.98 kg/sqm of bitumen of grade as per MoRT&H specifications clause 513. |
| 3 | Providing and applying tack coat with bitumen grade of 80/100 or bitumen emulsion using pressure distributor on the prepared bi tuminous/granul ar surface cleaned with mechanical broom as per MoRT&H specifications clause 503.;Bitumen 80 /100 @ 0.20 kg/sq.m |
| 4 | Providing and laying bituminious concrete with 40-60 TPH Drum Mix type Hhot mix plant producing an average output of 50 tonnes per hour using crushed aggregates of specified grading premixed with bituminious binder to mix with filler transporting the hotmix to work site with all leads laying with a h ydrostatic/hydr aulic paver finisher with sensor control to the required grade level and alignment using antistripping agent rolling with smooth wheeled vibratory or tandem rollers to achieve the desired compaction complete as per MoRT&H Specifications Clause 509; Grade-II (13mm nominal size) @ 6.0% Bitumen of grade 60/70;Ant istripping agent @ 0.5% of bitumen content |
| 5 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level uniform and free from streaks and holes as per MORTH Specification 803 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender