Tender For Supply, Installation, Testing & Commissioning Of 02 Nos. Water Pumping Station At 3164 Housing, Sector-3, Bawana, Delhi
Tender Value
28.88 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
2 days left
EMD
57770
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation, Testing & Commissioning Of 02 Nos. Water Pumping Station At 3164 Housing, Sector-3, Bawana, Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation, testing, commissioning / replacement submersible pump set of 5 H.P. Multi stages suitable for operation on 3 phase 415 volt, 50 Hz, AC supply for 200mm dia bore-well capable to discharge 365-225 LPM clear water at the head of 115 Mtr. totally enclosed submersible induction motor i/c lowering in existing bore -well complete as required. |
| 2 | Providing & fixing following size Gun Metal ISI mark, IS-778, Class 2 rating, screwed in bonnet, inside screw, non-rising stem, integral seet, solid wedge, cu-ally, female end, Gate Valve/ Horizontal Lift Check Valve in existing delivery liying og motor i/c testing etc. as required. 50 mm dia Gun Mental Gate Valve |
| 3 | 50 mm dia Gun Mental Horizontal Check Valve |
| 4 | Supply, installation, testing, commissoning of 3x4 sq mm one no PVC insulated PVC sheathed flate water proof single core copper conductor cable from submersible motor of 5 HP to control panel board for connection of motor complete as required. |
| 5 | Supplying and fixing of 06 MM Dia steel wire rope tested for holding the 05 HP Sub-mersible pump motor set to aviod slippabe with neccessary clamp etc. complete as requirad. |
| 6 | Providing and fixing / replacement star delta starter 5 HP 3 phase submersible pump starter for power supply in sheet steel enclousre in the existing panel wall with the help of hold fastner including connection testing etc. as required. |
| 7 | S/I/T/C of horizontal split casing centrifugal pump set with Bronze Impeller directly coupled with flexible coupling TEFC spuirrel cage induction Motor complete as required.(a) Discharge 100 cubic Mtr per Hour(b) Head 40Mtr(c) Type of liquid clear water(d) Capacity of motor 25 H.P.(e) RPM-1440(f) Intel size 80mm outlet size 65mm(g) Model No. 80/38 |
| 8 | Supplying, installation, testing and commissioning of electrical driven horizontal split casing centrifugal 25 HP motor of capable to perform the following duties, 4 Pole 415 volts 3 Phase 50 Hz AC Supply, 1440 RPM to be couple with Pump set etc as required. |
| 9 | Dismentaling of existing of 25 HP, 3 Phase, 415V, 50Hz, AC induction centrifugal motor Pump from existing foundation i/c cutting of rusted nut and bolt i/c disconnection, to and fro cartage also include in scope of work. |
| 10 | S/I/T/C of starter control panel for three phase 25 Hp motor, provided with 63 Amp. Bch type voltage range 415 volt, 50 Hz, 63amp cotactor and start capacitor provided as for 25 Hp panel provided with features of voltage, current indication as motor reading, start button, stop button etc. as required at site |
| 11 | Supply of following size one no PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade alluminium conductor Armoud cable complete as required at site 3.5 x 35sq mm |
| 12 | 3.5 x 25sq mm |
| 13 | Tracking- out of 5 H.P. 3 phase submersible pump set from the existing bore - well with the hell of chain pully block and tripot stand alongwith GI pipe complete as required. |
| 14 | Supplying and fabrication cubical type panel board made out of 16 SWG MS sheet 30cm deep with 200Amp Aluminium bus bar including internal copper wiring duly powder coated with locking arrangement and making the foundation in brick work/ iron frame as well as required at site |
| 15 | Supply of 18 watt Indoor decorative LED batten with extruded aluminium housing and opel diffuser IP-20 complete is required at site |
| 16 | S/I/T/C of 1 HP Single phase Submersible dewatering pump with starter panel complete as required at site |
| 17 | Emptying the existing under ground water tank of in the permises at site and with the help by the socker machine complete at site as per direction of engineer incharg. |
| 18 | Supplying, fixing, testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. (a) 100 mm dia |
| 19 | (b) 80 mm dia |
| 20 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm dia |
| 21 | 100 mm dia |
| 22 | Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 32 mm dia |
| 23 | 50 mm dia |
| 24 | Installation, Testing and Commissioning of pre-wired, fluorescent fitting / compact fluorescent/ LED fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm RLS/HFFR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 25 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group B |
| 26 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 x 1.5 sq. mm + 1 x 1.5 sq. mm |
| 27 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way, Double door |
| 28 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 29 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A |
| 30 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 31 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 32 | Provoding and fixing 6 SWG dia G.I. Wire on surface or in recess for loop earthing as required. |
| 33 | Supplying and installaton following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness. |
| 34 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 35 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on cable tray as required. Upto 35 sq. mm (clamped with 1mm thick saddle). |
| 36 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 x 25 sq mm |
| 37 | 3.5 x 35sq mm |
| 38 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125 A,36KA,FPMCCB |
| 39 | 200 A,36KA,FPMCCB |
| 40 | Supplying, fixing, testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications. NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified. 100 mm dia |
| 41 | (b) 80 mm dia |
| 42 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 43 | Buy back dismantled material i.e. horizontal spit casing centrifugal 2 Nos. of pump and motor set (25HP) and existing Main Cubical Electrical penal etc. recived from site. |
| 44 | Operation of Water Pumping operation by one pump operator (skilled) for one general shift at site. (12 Months X 2 Nos. = 24 Months) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender