Tender For Repair Of Community Centre And Periphery Development Over Plot No. 343 And 307 In N-4 Area In Ward No. 25
Tender Value
19.01 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
0 days left
EMD
19100
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Community Centre And Periphery Development Over Plot No. 343 And 307 In N-4 Area In Ward No. 25
BOQ
| Sl. No. | Item Description |
| 1 | Excavation of earth in all type of soil in all types of soils as per the suitable to the site as directed by Engineer-in- Charge and Horticulturist.The rate includes any shoring, pumping out water, removing the rank vegetation, etc., stacking the excavated materials transport to the park with in a lead of 5.0km measured from the edge of cutting including all lifts & transporting within project area as directed by Engineer. |
| 2 | Earth work in ordinary soil including rough dressing and levelling the bed. |
| 3 | Dismantling B.M. in cement mortar under 3mtr height including stacking the useful materials for re-use & removing the debries away from work site within 50mtr lead . |
| 4 | Removing and dismentlling cement plaster from walls including raking out the joints 12mm deep and removing the drbries within 50mtr lead. |
| 5 | Carriage of Excavated earth by mechanical means with in 5km lead including loading and unloading with all cost Conveyance T&P sun dries etc.complete as per direction of Enggineer-in-charge. |
| 6 | Providing and laying Course Sand in open foundation/ levelling course including labour cost complete . |
| 7 | Providing and laying Cement Concrete (1:4:8) in open foundation/ levelling course including centring and shuttering but excluding reinforcement all complete. |
| 8 | R.C.C. work of M20 grade with 20 mm down grade chips (C.B.) including Hoisting & laying .Plinth protection |
| 9 | compound wall column |
| 10 | Plinth |
| 11 | Gate column |
| 12 | Labour charges for cutting, bending, binding and tying the grill including the cost of M.S. rod. |
| 13 | Fly Ash Brick masonry in C.M. (1:4) in founadtion & plinth and super structure having crushing strength not less than 75 Kg / cm2 with dimensional tolerance ± 2%. |
| 14 | Fly ash brick masonry in C.M. (1:6) in founadtion & plinth and super structure using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 |
| 15 | 16mm thick C:P (1:6) over brick masonry |
| 16 | 12mm thick C:P (1:6) over brick work |
| 17 | Painting two coats with weather seal coat over a coat of water bound wall primer. |
| 18 | Finishing wall surface of wall with Acrylic wall putty (Water based) of approved make & finished smooth and even surface to received painting including cost of scaffolding staging charges with cost of all materials taxes,labour T & P etc complete. |
| 19 | Priming one coat with any approved primer including the cost of labour & primer. |
| 20 | Wall painting two coats with plastic emulsion paint with cost of paint. |
| 21 | Supplying fixing M S grill with all cost. |
| 22 | Painting two coats with any approved paint including the cost of enamel paint for Iron work. |
| 23 | Fixing tiles (300mm x300mm/200mm x 200mm)in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of precast tiles. |
| 24 | Fixing tiles (300mm x300mm/400mm x 400mm) in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including the cost of pre-cast tiles |
| 25 | Providing fitting and fixing of false celling with Aluminium anodised T Section No. 3215 with 2'-0\\" center to center, L section N0.1705 upto 15 micron on 4 walls to be fixied by means of steel screw & P.V.C plug & the Aluminium grid 2'-0\\"x2'-0\\" with prelaminated board. Date for 14'-6\\" x 14'-6\\" = 210.25 Sft or 19.53 Sqm |
| 26 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 60mmm thick Flyash based Paver Pervious Concrete Blocks With approved colour design Pattern etc. complete. |
| 27 | Rigid smooth centering and shuttering for R.C.C. works including false works and dismantlling them after casting including cost of materials complete in G.F. |
| 28 | Providing & Fixing to wall or ceiling & floor pvc pipes class confirming to ASTM-D-1785/89 (Schedule-80) & pipe fittings of the following nomonal bore with clamps including making good the wall.ceiling & floor all complete as per specification complete.25mm diameter |
| 29 | 20mm diameter |
| 30 | Cutting holes through existing brick work including making good the same in cement mortar(1:4) for taking GI/PVC pipes & fittings etc. all complete as per specification. |
| 31 | Cutting grooves in pucca floors & walls for taking GI/PVC pipes & making good the damages as per specification comploete. |
| 32 | Supplying Fixing of P H fittings with all cost15mm dia Brass Screw-down Bib Cock |
| 33 | 15mm dia Brass Screw-down Bib Cock |
| 34 | 20mm dia Brass Screw-down Bib Cock |
| 35 | 15mm dia CP Brass Short Body Bib Cock |
| 36 | 15mm dia Brass Long Body Bib Cock |
| 37 | CP Health Foucet with 1.0 Mtr PC tube |
| 38 | 15mm diameter CP extension piece-25mm long |
| 39 | 15mm dia Brass Srew -down Stop Cock |
| 40 | 20mm dia Brass Srew -down Stop Cock |
| 41 | Providing & fixing on wall face unplasticised Rigid PVC soil, waste & rain water pipes confirming to Is:13592 Type A, including jointing with seal ring confirming to IS:5382, leaving 10mm gap for thermal expansion,(i)single socketed pipes75mm dia UPVC Single Socketed Pipe (Working pressure 4 kg/cm2) |
| 42 | 110mm dia UPVC Single Socketed Pipe (Working pressure 4 kg/cm2) |
| 43 | Providing & fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes confirming to Is:13592 Type A, including jointing with seal ring confirming to IS:5382, leaving 10mm gap for thermal expansion75mm |
| 44 | 110mm |
| 45 | Fixing Wash Down Water Closet (European type W.C. pan) with integral 'S' or 'P' trap confirming to IS 2556:part 8-2004, to the floor with wooden plug & chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification.(seat & cover to be measured & paid for separately) |
| 46 | White plastic seat & cover |
| 47 | Proving cding & fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) confirming to IS:7231,with all fittings & fixtures complete. |
| 48 | Fixing wash basins with hole for pillar taps confirming to IS:2556:part-4-2004 with cast iron or MS brackets painted white including cutting holes in walls & making good the damages etc all complete as per specification. |
| 49 | Fixing mirror of superior glass mounted on 6 mm thick A.C sheet or plywood sheet & fixed to wooden plugs with chromium plated brass screws & washers complete as per specification. |
| 50 | Fixing Standard Sized Chromium Plated brass towel rail & soap case with chromium plated brass brackets fixed to wooden plugs with chromium plated brass screws, complete as per specification.20 x 600mm long CP brass towel rail |
| 51 | C P soap holder |
| 52 | Fixing Rotational moulded polythylene cylindrical vertical water storage tanks confirming to IS:12701--1996 including cutting holes through the tank & fixing mild steel tubes & fittings & providing extra sockets & jam nuts, fixing ball valve etc, including hoisting upto a height of 5 meters above ground level & placing the tank to the required position etc all complete as per specification & direction of the Engineer-in-Charge. |
| 53 | Extra over item No.3.1.8 for hoisting Rotational moulded Polythylene cylindrical vertical water storage tanks of the following size for every additional height of 5 meters or part thereof |
| 54 | Providing fifting and fixing of shoulder mounted informatory Sign Board of size (1150 mm x 743mm) using upper high efficiency full cubic reflective sheeting type-XI DG3-ASTM on 4mm thick Aluminium Composit Panel (ACP) over which alphabets and numericals and reverse cut with computerised cut plotter on frame made out of 30x30x1.5mm square SS pipe main frmae, 25x5mm SS flat back suppoirt frame, 1 nos 80NB SS post with top cover including screws and revets as may be required. The frame will be fixed after necessary excavation, concrete and transportations to work site with loading and unloading and installation of the board digging 1 no ( 450x450x800mm) foundation and trench and filling with M-15 grade concrete and compacting properly including all cost, conveyance, taxes, royality etc. complete as directed by EIC. |
| 55 | Supplying, fixing the PVC door with all cost. |
| 56 | Supplying,Fixinging Pre-cast kerb stone with all cost |
| 57 | Display Board Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender