Tender For Construction Of Community Center At Open Space In Front Of Plot No. 673 In Ward No. 02
Tender Value
24.42 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
9 days left
EMD
24500
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Community Center At Open Space In Front Of Plot No. 673 In Ward No. 02
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in hard soil or gravelly soil within 50mtr. initial lead and 1.50mtr initial lift including rough dressing and levelling the bed |
| 2 | Carriage of Excavated earth by mechanical means within 5 km lead including loading and unloading with all cost conveyance T & P sundries etc complete as per direction of Engineer- in-charge. |
| 3 | Supply and filling in foundation and plinth with river sand, in layers including watering, with cost, conveyance, royalties, and taxes of all materials, cost of all labour, carriage of water, sundries T & p required for the work etc all complete as per the specification & direction of E-I-C |
| 4 | PCC in prop. (1:4:8) in foundation and bed using 4 cm size h.g C.B metal of approved quality and approved quarry including hoisting, lowering, laying concrete and compacting the same to required level, with compaction, watering and curing including cost, conveyance, royalties and taxes of all materials with cost of all labours, sundries and T & p such as hire charges of concrete mixer, concrete vibrator required for the work etc complete as per the specification and direction of EI-C |
| 5 | R.C.C. work of M25 grade with 20 mm down grade chips (C.B.) including centring & shurtering for RCC work only (FOUNDATIONS) |
| 6 | Column up to plinth |
| 7 | Plinth Beam |
| 8 | Roof Beam |
| 9 | Roof Slab |
| 10 | Chajja |
| 11 | Lintel Above door opening |
| 12 | Staicase |
| 13 | Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge. |
| 14 | First class Fly Ash brick work in cement mortar (1:4) in Foundation & Plinth with best quality bricks having crushing strength from 75kg/cm2 to 99kg/cm2, immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling etc. complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 15 | First class Fly Ash brick work in cement mortar (1:6) Superstructure with best quality bricks having crushing strength from 75kg/cm2 to 99kg/cm2, immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling etc. complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 16 | C:C: (1:2:4) using 12 mm to 20 mm size H.G. stone chips including the cost of all materials labour carriage, royalty etc complete. |
| 17 | 16mm thick cement plaster (1:6) over brick work including all cost conveyance royalty & taxes etc. comp. to work site per 1sqm. |
| 18 | 12mm thick cement plaster (1:6) over brick work including all cost conveyance royalty & taxes etc. comp. to work site per 1sqm. |
| 19 | Providing 6 mm thick cement plaster in CM (1:4) with neat cement punning over RCC surface finished smooth to the walls, watering & curing the same including cost, coveyance, royalties, taxes of all materials and cost of all labour T & p, sundries etc all complete as per the specification and direction of Engineer-in-charge. |
| 20 | Cement washing 2coats over plastered surrface including all cost conveyance taxes and as per the direction of EIC etc complete |
| 21 | Finishing plastered surface of wall with plaster of paris and making smooth sorface to receive painting |
| 22 | Painting two coats with weather seal coat over a coat of water bound wall primer including cost of all materials,labour,T & P sundries etc complete as per direction of Engineer- in-charge. |
| 23 | Providing supplying MS grill made of MS angle, square bar and flat including cost, coveyance, royalties, taxes of all materials and cost of all labour T & p, sundries etc all complete as per the specification and direction of Engineer-in-charge. |
| 24 | Fixing of vetrified tiles in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including the cost of vetrifid tiles etc complete as per the direction of EIC. |
| 25 | Fixing ceramic glazed tiles in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of tiles etc complete as per the direction of EIC. |
| 26 | Painting two coat enamel paint over a coat of primer on new iron work with cost of primer and paint including all cost, taxes , labour T & P etc. complete. |
| 27 | Supplying ,fitting and fixing of Openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame shutters and all fitting and fixtures |
| 28 | Supplying ,fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame shutters and all fitting and fixtures |
| 29 | 2.50 cm thick grading concrete using C.C. (1:2:2) on roof slab with 6mm sizes down graded H.G. chips on new work |
| 30 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of M-35 grade With approved colour design Pattern etc. complete. |
| 31 | Supplying, fitting & fixing of Stainless steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe beacing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. requered for the complete in all respect. |
| 32 | Iron work wrought and put up in trusses and purlins and posts etc. complete. including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 33 | Labour for fixing of Tata/Bhusan/Jindal Make Aluminium semi corrugated colour sheet 0.5 in roof drilling holes in wind ties including fixing ridges and valleys etc complete. |
| 34 | Supplying all materials, labour, T&P conveyances, fitting and fixing the following nominal bore G.I. / P.V.C. Pipe to walls / ceiling / floor with required G.I. Fittings including cutting the pipes and threading, making good the damage all complete as per direction of Engineer-in-charge (a- 25mm dia PVC ASTM Sch-80 pipe ) |
| 35 | 25mm dia MTA |
| 36 | 25mm dia FTA |
| 37 | 25 x15mm dia UPVC brass Elbow |
| 38 | 25mm UPVC socket |
| 39 | 40mm dia PVC ASTM Sch-80 pipe |
| 40 | 40mm dia MTA |
| 41 | 40mm dia FTA |
| 42 | 40mm UPVC socket |
| 43 | Supplying all materials, labour, T&P and fixing of following P.H. fittings of approved make including supplying of all necessary jointing materials all complete as per approved specification and direction of Engineer-in-charge. 10 ltrs. Capacity P.V.C. Low level cistern with 32mm dia. PVC Long flush bend (Parryware slim line). |
| 44 | 23\\" long EWC with P' trap including PVC Seat cover (Nycer / Parryware) |
| 45 | 23\\" size Orissa pan with P' trap (Parryware) |
| 46 | 15mm dia. C.P. Angle stop cock.(Amber Delux) |
| 47 | 15mm dia. C.P. short body bib cock.(Amber Delux) |
| 48 | 15mm dia CP Brass long body Bib Cock |
| 49 | 15mm dia C.P. extension piece and flange |
| 50 | C.P.revolving shower with arm (overhead) |
| 51 | C.P Soap holder |
| 52 | wo in one Health Faucet Bib cock |
| 53 | Hand wash stand basin with Pedestral |
| 54 | C.P Towel Ring |
| 55 | Supply all materials, labour, T&P and laying of following dia. SWR pipes and fittings, jointing with C.M. (1:1) fixing to walls with nails, bobbins and wooden plugs etc. all complete as per direction of Engineer-in-charge. (110mm dia PVC SWR door bend) |
| 56 | 110mm dia PVC SWR door bend |
| 57 | 110mm dia. PVC SWR S/J with Door |
| 58 | 110mm dia. PVC SWR Plain Bend |
| 59 | 110mm dia. PVC SWR Pipe clip |
| 60 | 110mm dia. PVC SWR Cowl |
| 61 | 110mm dia. PVC SWR off set bend |
| 62 | 110mm dia. PVC SWR P' trap |
| 63 | Supplying all materials, labour, T&P and construction of damaged Inspection chamber with K.B. brick in C.M. (1:4) providing 12mm thick C.P (1:3) including punning inside and outside fixing of 80mm thick R.C.C. cover slab etc. all complete as per P.H. specification and direction of Engineer-in-charge. |
| 64 | Supplying all materials, labour, T&P and fixing of following P.H. fittings of approved make including supplying of all necessary jointing materials all complete as per approved specification and direction of Engineer-in-charge. (2000 liter capacity PvC water tank) |
| 65 | Supplying all materials, labour, T&P and fixing of following P.H. fittings of approved make including supplying of all necessary jointing materials all complete as per approved specification and direction of Engineer-in-charge. (2000 liter capacity PvC water tank) |
| 66 | Construction of septic tank using RCC well ring of 50mm thick using nominalk reinforcement. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender