Tender For Up-Gradation And Development Of Amenities At Kush Mahal In Warangal Fort, Warangal For The Year 2026-27
Tender Value
53.58 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
11 days left
EMD
1.33 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Warangal Urban → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Up-Gradation And Development Of Amenities At Kush Mahal In Warangal Fort, Warangal For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Name of the Monument / Site: Warangal Fort, Warangal |
| 2 | Provision for dismantling Stone masonry in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge |
| 3 | Provision for removing existing grill in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including stacking within 50 metres lead at stack yard/store room of warangal fort complex as directed by officer incharge |
| 4 | Provision for dismantling of cement concrete manually including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 5 | Provision for taking out of damaged slab floor from the pathway stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead |
| 6 | Provision made for construction of CR Masonry wall in Cement mortar 1: 4 using hard granite stones of size 0.23 X 0.23 X 0.30 mts. to 0.23 X 0.23 X 0.45 mts. Including cost of materials, loading, unloading, conveyance, taxes, GST etc all complete as per the directions of Engineer-in-charge. |
| 7 | Provision made for coping on the masonry wall in Cement Concrete 1: 2: 4 using 10mm HBG aggregate for boundary wall and finished with CM 1: 4 plaster, 20 mm thick, including cost of materials, loading, unloading, conveyance, taxes, GST etc all complete as per the directions of Engineer in charge |
| 8 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge |
| 9 | Provision for laying of P.C.C 1: 4: 8 with 40 mm HBG metal below pathway stone slabs to provide hard and level surface as base course including cost of material, labour, conveyance, shuttering charges, concrete mixing charges, leveling the surface by providing slopes, applicable taxes etc. all complete as per the directions of ASI officials |
| 10 | Provision for laying of approach pathway with well-dressed Matching stone slabs matching with texture of monument of average 100 mm thick and sizes of Length 0.60m to 1.20m, Width of 0.45 to 0.60mts laid to required slopes for easy draining of rain water to avoid water logging inside monument including cost of material, dressing charges, laying charges, cost of cement mortar for cushion, labour, seigniorage charges, applicable taxes, loading, unloading, conveyance, cutting charges etc. all complete |
| 11 | Providing and carrying out repairs to existing M.S. (Mild Steel) grills by carefully dismantling loose or damaged portions where necessary, straightening and aligning bent, twisted, or deformed grill members to restore original shape and line, and carrying out welding of all defective, cracked, broken, or separated joints. The work shall include fixing and welding of M.S. angles, flats, bars, and other grill components as required for strengthening and restoring the grill to its original condition, grinding and finishing welded surfaces, removing rust and scale from repaired portions, and completing the work in all respects to the satisfaction of the Engineer-in- Charge. The rate shall include all labour, welding electrodes, cutting, fitting, tools, tackles, scaffolding, and incidental materials required for proper execution of the work |
| 12 | Providing and applying paint finish of desired color of officer in charge on Grill surfaces at all locations, including thorough surface preparation by cleaning, removal of rust, loose scale, dirt, grease, oil, old paint, and other foreign matter by suitable mechanical/manual methods as required |
| 13 | Provision for providing, supplying, installing, testing and commissioning of 500 LPH R.O. plant with UV system and 500 L SS storage tank including raw water pump, multimedia filter, carbon filter, dosing pump with chemicals, jumbo cartridge filters (5 micron & 1 micron), high pressure pump, RO block (1+1), membranes with pressure tube, instrumentation (pressure gauges, flow indicators, conductivity/TDS meter, pressure & float switches), automatic electrical control panel, complete piping with multiport valves, pipe fittings, nuts, bolts and wiring, along with 2-ton online chiller, MS cabin/shed of minimum size 5.5 x 5.5 feet and height 8 feet for housing the entire system with 6 taps and wastewater disposal arrangement, providing all necessary electrical and plumbing connections to inlet including raw water storage tank and including labour, loading, unloading, transportation, GST and all incidental charges as per specifications and instructions of ASI officials/site in-charge.(Photo Enlcosed) |
| 14 | Providing, supplying, installing, testing and commissioning of CCTV surveillance system with HD IP cameras, NVR, storage device, power supply units and necessary accessories. Including supply and laying of power/data cabling, mounting arrangements, junction boxes, connectors and allied works. Complete with fixing, configuration, integration, testing and commissioning at site. Including all labour, materials, loading, unloading, transportation, tools and plants, and incidental charges required for satisfactory completion of the work.(Refer to Annexure attached) |
| 15 | Providing, fabricating, supplying and fixing portable staircase of overall width 1.20 m with 6 Nos. wooden treads to negotiate a level difference of 0.90 m, fabricated using SS 304 grade framework comprising 50 mm × 50 mm × 2 mm square hollow sections for stringers, 50.8 mm dia (2\\" NB) SS circular pipe for main posts, 38.1 mm dia (1½\\" NB) SS circular pipe for handrail, and 12 mm dia SS solid rods as horizontal balusters, complete with 40 mm thick seasoned teak wood/hardwood anti-skid treads, SS base plates of size 200 mm × 200 mm × 6 mm thick with anchor bolt arrangement, all welding, grinding, polishing to matte finish, cutting, fitting, transportation, erection, testing and commissioning complete. The staircase shall have a clear width of 1.20 m, six risers of approximately 150 mm each, tread depth of approximately 280 mm, handrail height of 900 mm above top landing (overall height 1.80 m from ground level), designed for easy portability and suitable for use at heritage monuments without causing damage to the existing structure, including all labour, tools, tackles, consumables and incidentals complete as directed by the Engineer-in-Charge.(Drawing enclosed) |
| 16 | Providing and fixing the existing MS grill on the boundary wall in position, including necessary alignment, welding, drilling, clamps, brackets, anchor fasteners and other required fixing accessories, complete in all respects as directed by the Engineer-in-Charge. Level) after deductions Qty 1700.761- 450.328= 1250.433) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender