Tender For Repair And Maintenance Of Steel/Wooden Furniture And Misc Connected Items Of Dharmund repair renovation Units And Hq 11 Sect Its repair renovation Units Under Age (I) Bhalra (Nit No. 66 Of 2026-27)
Tender Value
8.20 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
15 days left
EMD
16400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagrota → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Steel/Wooden Furniture And Misc Connected Items Of Dharmund repair renovation Units And Hq 11 Sect Its repair renovation Units Under Age (I) Bhalra (Nit No. 66 Of 2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | ALMIRAH LARGE/MED STEEL WITH SHALVE & ALMIRAHA LARGE 1/2 HAND & 1/2 SHALVES |
| 2 | Replacement of old existing broken / unserviceable locks of any description and in any position with new locks, six lever with double keys , fixing with suitable nuts , complete all as specified and directed by Engineer-in-Charge, Make:Godrej/Harrison |
| 3 | Replacement of old existing broken / unserviceable door handles of Almirah and new door handle of size 100mm long, cast Iron chromium plated of approved make of Almirah shall be fixed with suitable nuts and pins, complete all as specified and directed by Engineer-in-Charge . |
| 4 | Replacement of old existing broken / unserviceable Legs of Almirah and new Legs made out of 1.0mm mild steel sheet including welding of legs where as required, complete all shown in drg and as directed by Engineer-in-Charge . |
| 5 | Taking out unserviceable steel clamp with new steel clamp made out of MS sheet 3.00mm thick of size 50mmx20mm including fixing of loose shelves, complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Replacement of old damaged/ unserviceable shelves of Almirah large with new shelf 1.0mm thick Mild Steel Sheet of size 0.765mx0.44m with suitable clamps as shown in drg to be painted with two coat of synthetic enamel paint (Olive green) over a coat of red oxide primer with spray gun stove enamel paint, finish to the required shade , complete all as shown in drg and as directed by Engineer-in-Charge |
| 7 | Replacement of old damaged/ UNSV shelves of Almirah Medium with new 1.0mm thick Mild Steel Sheet of size 0.765mx0.44m with suitable clamps as shown in drg and to be painted with 02 coats of synthetic enamel paint (Olive green) over a coat of red oxide primer with spray gun stove enamel paint, finish to the required shade , complete all as shown in drg and as directed by Engineer-in-Charge |
| 8 | Replacement of unserviceable locking device from Almirah large/Medium steel with new locking device, complete all as shown in drg and as directed by Engineer-in-Charge |
| 9 | BED WITH PLY TOP |
| 10 | Replacement of unserviceable/demaged long rail from Bed with ply top with new long rail made of sheesham seasoned, hard wood size 1980mm x90mm x35mm matching with existing shape and size, complete all as specified and directed by Engineer-in-Charge |
| 11 | Replacement of unserviceable/demaged headboard with new headboard of size 0.90mm x0.46m made of ply wood commercial, 4.0mm thick and one side teak faced, duly covered with 4mm thick teak wood beading all around, complete all as shown in drg and as specified and directed by Engineer-in-Charge. Make of Ply:- Kit ply/ National/Bhutan/ Nova Pain. |
| 12 | Replacement of unserviceable/demaged footboard from Bed with ply top with new footboard made of ply wood commercial, 3.5mm thick and one side teak faced, duly covered with 4mm thick teak wood beading all around, complete all as shown in drg and as specified and directed by Engineer-in-Charge. Make of Ply :- Kit ply/ National/ Bhutan/ Nova Pain. |
| 13 | Replacement of unserviceable legs from Bed with ply top with new legs made of seasoned hard wood complete all as shown in drg and as specified and directed by Engineer-in-Charge |
| 14 | Replacement of unserviceable legs ply wood and stiffener from Bed with ply top with new ply wood top commedrcial, 12mm thick of size 0.90m x1.98m, exterior grade BWR including hardwood stiffener provided at bottom of ply wood, complete all as shown in drg and as specified and directed by Engineer-in-Charge. Make of Ply :- Kit ply/National/Bhutan/Nova Pain. |
| 15 | CHAIR COMPUTER WITH ARMS |
| 16 | Removing / taking down old existing broken base stand of chair revolving of any type and S & F new base stand of chair revolving complete with hydraulic system, fixed all as shown on drawing and as directed by Engineer-in-Charge. |
| 17 | Replacing tapestry cloth from seat & back of chairs with new tapestry cloth of approved quality & shade including replacement of foam cushion of density 40 kg/cum, 100 mm thick 6mm thick pressed and plywoood of size 530 mm x470mm etc, as required, including painting, repair, welding and readjustment of chair as per trade pattern, complete all as directed by Engineer-in-Charge.Model. Make : Leezy |
| 18 | Replacement of unserviceable hand rest from chair (Executive) with new hand rest of size 700mmx50mmx20mm of different type as per trade pattern matching with the existing hand rest, complete all as directed by Engineer-in-Charge. |
| 19 | Replacement of unserviceable twin wheel Castor from chair executive fixed with new twin wheel castors per sample complete all as direction by Engineer-in-Charge. |
| 20 | CHAIR DINING |
| 21 | Replacement of U/S rear leg from chair dining with new rear leg of seasoned teak wood of size 0.89mx0.030mx0.055m matching with the existing shape and size, complete all as specified and directed by Engineer-in-Charge. |
| 22 | Replacement of U/S front leg from chair dining with new front leg of seasoned teak wood of size 0.46mx0.080m x 0.055m from chair dinning with new front leg of seasoned teak wood matching with the existing shape and size, complete all as specified and directed by Engineer-in-Charge. |
| 23 | Replacement of U/S front/back/side rail from chair dining with new front/back/side rail made out of well seasoned teak wood of size 0.430m x 0.030mx0.065m matching with the existing shape & Size, complete all as specified and directed by Engineer-in-Charge. |
| 24 | Replacement of U/S stiffeners from chair dining with new stiffeners made of size 0.44mx0.025mx0.20m made out of well seasoned teak wood matching with the existing shape & size, complete all as specified and directed by Engineer-in-Charge. |
| 25 | Re-canning of chair dining arms with 2 mm wide half round white plastic cane and perimeter canning with 4 mm cane as shown in drawing including supply of new cane as required, complete all as specified and directed by Engineer-in-Charge. |
| 26 | French polish of best quality to the chair dining with arms including preparation of surface complete all as specified and directed by Engineer-in-Charge. |
| 27 | CHAIR EXECUTIVE REVOLVING & CHAIR OFFICE MATE (TP) |
| 28 | Replacement of old unserviceable base stand of Chair Executive Revolving of any type and supply and Fixing new base stand of chair revolving complete with hydrulic system, fixed all as shown on drawing and as directed. |
| 29 | Replacement of Tapestry cloth from Seat and back of chairs with new tapestry cloth of approved quality and shade including replacement of foam cusion of density 40 kg/Cum 100 mm thick 6mm thick pressed and plywood of size 530mmx470mm etc as required including painting repair, welding and re-adjustment of chair as per trade pattern , complete all as directed. |
| 30 | Replacement of old unserviceable Hand Rest from chair (Excutive) with new hand rest of size 700mmx50mmx20mm of different type as per trade patter4n matching with existing hand rest , complete all as directed. |
| 31 | Replacement of old unserviceable twin wheel castor froma chair executive with new twin wheel costors as per sample complete all as directed. |
| 32 | LOCKER STEEL (770X600X950MM, 770X600X 1900MM , 800X600X450MM |
| 33 | Replacement of old existing broken / unserviceable locks of any description and in any position with new locks, 80mm six lever with double keys , fixing with suitable nuts , complete all as specified and directed by Engineer-in-Charge, Make:Godrej/Harrison |
| 34 | Replacement of old existing broken / unserviceable door handles of locker steel and new door handle of size 100mm long, cast Iron chromium plated of approved make of locker steel shall be fixed with suitable nuts and pins, complete all as specified and directed by Engineer-in-Charge . |
| 35 | Replacement of old existing broken / unserviceable Legs of locker steel and new Legs made out of 1.0mm mild steel including welding of legs where as required, complete all shown in drg and as directed by Engineer-in-Charge . |
| 36 | Replacement of unserviceable locking device from locker steel with new locking device, complete all as shown in drg and as directed by Engineer-in-Charge |
| 37 | LOCKER BED SIDE STEEL |
| 38 | Replacement of old existing broken / unserviceable haps and stapples of any description and in any position with new haps and staples 75x4x3mm chromium plated , fixing with suitable secrews , complete all as specified and directed by Engineer-in-Charge, Make:Godrej/Harrison |
| 39 | Replacement of old existing broken / unserviceable door handles of locker bed side and new door handle of size 100mm long, cast Iron chromium plated of approved make of locker bed side shall be fixed with suitable nuts and pins, complete all as specified and directed by Engineer-in-Charge . |
| 40 | Replacement of old existing broken / unserviceable Legs of locker bed side steel and new Legs made out of 1.0mm mild steel including welding of legs where as required, complete all shown in drg and as directed by Engineer-in-Charge . |
| 41 | STEEL SINGLE BUNK COMPLETE 1890X800x450 , 2000X815MM ,1890x800X1730MM & 1940x 925MM WITH STEEL FRAME WITH SHOE RACK |
| 42 | Replacement of unserviceable/demaged plywood top with from its position with new plywood top of size 1890mmx800mm , 2000X815mm, 1940X925MMx12mm thick, BWR grade as shown in drawing, complete all as specified and directed by the Engineer-in-Charge Make : Kit ply/National Bhutan/Nova pan |
| 43 | Materials and labour for welding to damaged/decayed frame of shoe rack steel complete all as directed by Engineer-in-Charge. |
| 44 | M&L for replacement of unserviceable Mattress with new mattress of 32 density, 50mm thick of size 1890 mm x 800 mm ,2000X815MM &1940x925mm covered with high quality cloured rexzine shown in drawing, complete all as specified and directed by Engr -in-Charge Make : Sleep well/kurlon |
| 45 | STEEL DOUBLE BUNK COMPLETE 1890X800x1730 MM WITH PLYWOOD CUSHION AND SHOE RACK |
| 46 | Replacement of unserviceable/demaged plywood top with from its position with new plywood top 1890mmx800mmx12mm thick, BWR grade as shown in drawing, complete all as specified and directed by the Engineer-in-Charge Make : Kit ply/National Bhutan/Nova pan |
| 47 | Materials and labour for welding to damaged/decayed frame of shoe rack steel complete all as directed by Engineer-in-Charge. |
| 48 | M&L for replacement of unserviceable Mattress with new mattress of 32 density, 50mm thick of size 1890 mm x 800 mm covered with high quality cloured rexzine shown in drawing, complete all as specified and directed by Engr -in-Charge Make : Sleep well/kurlon |
| 49 | LOOKING MIRROR OF SIZE 75x50CM WITH FRAME |
| 50 | Replacement of old existing broken/unserviceable looking mirror of size 75 X50cm including wooden frame with new looking mirror 75cmX50cmX5.5mm thick with wooden frame on back side of 6mm plywood complete all as specified and directed by the Engineer-in-Charge Make of Mirror : Sant Gobin/Modigaurd |
| 51 | PEG TABLE |
| 52 | Replacement of old unserviceable /damaged top of table peg with new top made of pre-laminated particle board of size 0.45m x 0.30m one side teak face exterior grade BWR 18mm thick duly covered with 4mm thick teak wood beading all around the top complete all as shown in drg and as directed by Engineer-in-Charge. Make:- Kit ply/National/Bhutan/Nova Pan |
| 53 | PAINTING OF STEEL FURNITURE : Painting of following steel furniture items by providing two coats of synthetic enameled paint of OG/Black/Silver/ Smoke Gray to match with existing shade with spray gun after properly smoothing the surface with sand paper and applying putty and primer including minor welding/denting etc where necessary all as directed by Engineer-in-charge. Make of Paint : Nerolac/Berger/Asian |
| 54 | Almiraha Large with shalve & Almiraha Large 1/2 and & 1/2 Shalves |
| 55 | Almiraha Med with shalves |
| 56 | Steel Locker (770X600X950MM,770X600X1900MM , 800X600X450MM |
| 57 | Locker Bed Side |
| 58 | Steel Double Bunk Complete 1890X800x1730 |
| 59 | Steel Sleeping bunk 1890X800x450, 2000X815MM, 1890x800x1730&1940x925MM |
| 60 | Almirahs Med |
| 61 | Table 900x600x760mm Steel with Drawer (FD-1008) |
| 62 | Table office Clk steel with drawer FD-1004 |
| 63 | SOFA SET 5 SEATER & 4SEATER |
| 64 | M&L for replacement of unserviceable cushion with new seat cushion of foam density of 32 Kg/cum, 100 mm thick x 530 mm x 560 mm covered with tapestry cloth colored directed by Engr -in-Charge Make : Sleepwell/Kurlon |
| 65 | Polish of best quality to the sofa set five seater including preparation of surface with sand paper, complete all as directed. |
| 66 | CHARPOY GI PIPE |
| 67 | Replacement of unserviceable/demaged plywood top from its position with new plywood top of size 1980mm x 900mm x12mm thick, BWR grade fixed with 10 Nos of nuts, bolts and washer to GI frame as shown in drawing, complete all as specified and directed by lthe Engineer-in-Charge Make ply/National Bhutan/Nova pan |
| 68 | Removal of existing broken long rails from charpoy GI Pipe including cutting and threading the same into one short rail and one leg, and fixing the same in the existing GI charpoy as required complete all as specified and directed by Engineer-in-Charge. |
| 69 | Removal of existing broken short rails of GI pipe charpoy including cutting and threading the same into one leg and fixing in the same position , complete all as specified and directed by Engineer-in-Charge. |
| 70 | Replacement of unserviceable/ broken /old hexagonal check nut of size with 32 mm and fixed with 32 bore mm hexagonal check nuts where as required complete all as specified and directed by Engineer-in-Charge. |
| 71 | Replacement of existing broken/ unserviceable GI Elbow , from the GI charpoy with new 32mm bore, three way Elbow, wherever is required including necessary threading complete all as specified and directed by Engineer-in-Charge. |
| 72 | TABLE DINING FOR 06 PERSONS FD-273,376,30Repair to table dining of 08 persons including dismantling /removal of all broken parts and replacing with new parts of well seasoned teak wood as under:- |
| 73 | Supply and fixing top of the table 18mm thick, exterior grade in natural teak wood shade shall be prelaminated particleboard, 4mm thick teak wood edging all around duly French polished complete all as specified and directed by Engineer-in-ChargeMake of PP Board:- Kit Ply/Bhutan Board/Novapan |
| 74 | Supply and fixing legs of size 0.0.40m x 0.075m x 0.76m made out of well seasoned teak wood as per drg duly French polished including preparation of wooden surface complete all as specified and directed by Engineer-in-Charge. |
| 75 | Supply and fixing Long rail of size 1.80m x 0.025m x0.10m made out of well seasoned teak wood as per drg duly French polished including preparation of wooden surface complete all as specified and directed by Engineer-in-Charge. |
| 76 | Supply and fixing Short rail of size 0.90m x 0.025m x 0.10m of made out of well seasoned teak wood as per drg duly French polished including preparation of wooden surface complete all as specified and directed by Engineer-in-Charge |
| 77 | Flate iron of size 25mm x 3mm, 200mm long bend to shape at right angle shape corner at the junction of top rail meeting with leg complete all as specified and directed Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender