Defence Statutory Bodies & Commissions/Committees Closing in 15 days TDR #57393651

Tender For Repair / Maintenance To Boundry Wall, Plaster, Concertina Coil, Barbed Wire, Grating Alongwith Bdy Wall At Old Med Complex, Mukherjee Complex Of Age B/R-I Of Ge (N) Udh Ur.

Issued by Statutory Bodies & Commissions/Committees · Udhampur, Jammu and Kashmir
Tender Value
45 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
15 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair / Maintenance To Boundry Wall, Plaster, Concertina Coil, Barbed Wire, Grating Alongwith Bdy Wall At Old Med Complex, Mukherjee Complex Of Age B/R-I Of Ge (N) Udh Ur.

BOQ

Name of Work:- REPAIR / MAINT TO BOUNDRY WALL, PLASTER, CONCERTINA COIL, BARBED WIRE, GRATING ALONGWITH BDY WALL AT OLD MED COMPLEX, MUKHERJEE COMPLEX OF AGE B/R-I OF GE (N) UDH UR.
Sl. No. Item Description
1Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillar etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.
2M&L for walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed.
3All as per serial item No. 2.00 here-in-above but except stone.Note :- Serviceable quantity of stone obtained from srl item No. 1.00 here-in-above shall be reused under this item.
4Dismantling of asbestos cement (corrugated, semicorrugated etc.) sheets as in roof coverings etc, complete all as specified and directed.
5M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses stone masonry in CM 1:4, complete all as specified and directed.
6M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius with using old size bricks, built in cement mortar 1:6, complete all as specified and directed.
7All as per serial item No. 6.00 here-in-above but except bricks.Note :- Serviceable quantity of bricks obtained from srl item No. 1.00 here-in-above shall be reused under this item.
8M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping, kneelers, bed block, for fixing angle iron etc. including necessary from work, complete all as specified and directed.
9S&F precast cement concrete jallies 25mm thick (measured solid), set in cement mortar 1:4 including all moulding and necessry formwork, complete all as specified and directed.
10S&F pre-painted coloured corrugated profiled Galvalume / Zincalume sheet with min 0.50mm TCT with BTM of 0.45mm thick conforming to IS-513 (AZ-150 GSM, Al Zn alloy metallic coating 550 MPA yield stress as per AS-1397) as in roof covering/ clading to walls, fixed with self taping screws, colour/ exterior coat of silicon modified polyster/ BHP x RW paint system 20 micron top coat applied over 5 micron primer and a micron polyster back coat applied over 5 micron primer all fixed with galvanised self drilling self tapping fastener (12-14x55 with EPDM seals), complete all as specified and directed.
11S&F 0.50mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall/ ridges/ valley gutters/ facia of bldg, fixed with self tapping screws or 'J' hooks or suitable arrangements as per situation/ site requirement, complete all as specified and directed.
12Taking down cement plaster of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
13M&L for 15mm thick rendering in CM 1:4 on faces of brick work or stone surface or concrete surface including finishing the surface even and fair without using extra cement, complete all as specified and directed.
14M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint, white or tinted, over a coat of alkali resistance primer, complete all as specified and directed.
15M&L for preparation of plastered or unplastered old surfaces of walls, chajja, balcony, facia etc and applying two coat of cement base paint, complete all as specified and directed.
16M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in, mass concrete etc, complete all as specified and directed.
17M&L for plain cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in surface channels and drains, complete all as specified and directed.
18Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
19Dismantling of wrought iron or mild steel works of any description and in any position, complete all as specified and directed.
20M&L for mild steel framed work for grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work, conforming to Fe-290 Gde-E-165, complete all as specified and directed.
21S&F 5mm thick insulated PVC Wall Lining honeycombed / solid (As per sample kept in GE's office) consisting of PVC insulated panels with approved colour and design printed PVC sheet used colour PVC sheet duly fitted into the wall including PVC sheet in strips feathered at the edges including removing and refixing electric switch boards & plates and covered with PVC stripes or beading after fixing wall panelling as per specifications, complete all as specified and directed.
22Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
23M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
24M&L for preparation of old painted steel and iron surfaces, exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
25M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as sub base of floor, complete all as specified and directed.
26M&L for machine pressed rubber moulded manufactured/ compacted by vibrating table method precast concrete interlocking paver block, laquor finish of any shape and size, confirming to IS:15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment and joints filled with sand, complete all as specified and directed.
27M&L for machine pressed rubber moulded manufactured/ compacted by vibrating table method precast concrete interlocking paver block, laquor finish of any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and joints filled with sand, complete all as specified and directed.
28M&L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.
29Re-fixing of interlocking tiles of any thickness, laid dry in position over sand cushioning including dismantling of existing tiles, complete all as specified and directed.
30M&L for 100mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as floor etc, complete all as specified and directed.
31Providing precast cement concrete block type B-1 1:2:4 (using 20mm graded crushed stone aggregates) as in kerb stone, exc 10cm in width and setting in mortar in 1:4, complete all as specified and directed.
32S&F in repair galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specified and directed.Note :- Each line wire to be measured and paid.
33Restraning, resecuring including making good galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specified and directed.Note :- Each line wire to be measured and paid.
34S&F galvanised concertina coil 600mm dia, using 3 Nos GI clips per coil, complete all as specified and directed.
35Dismantling of fencing wire mesh, chain link fencing of any type and in any position, complete all as specified and directed.
36Fixing only chain link fencing including line wires of any mesh, size and type, to any type of standards rails, straining bolts etc. including provision of binding wire, complete all as specified and directed.
37Supply only chain link MS galvanised fencing of any size or type, complete all as specified and directed.
38M&L for mild steel hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for door, balusters, noising to steps including embedding in concrete and screweing etc, wind ties including securing bolts, post and struts in fencing drilling holes, notching for wire etc, flat iron fillets including necessary drilling, bolting and reveting etc. or similar works, complete all as specified and directed by Engr-in-Charge.
39Demolition of stone slabs and tiles, laid dry or dry beded or pointed of any description or thickness as in floors, aprons etc, complete all as specified and directed.
40M&L for granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and the like, one piece full in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid/ fixed over and including 15mm thick screed bed in CM 1:6, complete all as specufied and directed.
41Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises outside MD land without any extra charge, complete all as specified and directed.
42M&L for factory made heavy duty full body digital matt finish paving coloured tiles of size 300mm x 300mm x 10mm thick each for external use, laid over and including 15mm thick screed bed or bedding layer in CM 1:4 including jointed with neat cement slurry and pointed in coloured tile epoxy grout to match the shade of tiles, complete all as specified and directed. S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57393651
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 45 Lakhs
LAST DATE 29-09-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair / Maintenance To Boundry Wall, Plaster, Concertina Coil, Barbed Wire, Grating Alongwith Bdy Wall At Old Med Complex, Mukherjee Complex Of Age B/R-I Of Ge (N) Udh Ur.
Basic Detail
Tender No GE/U(N)-71/2026-27
Bidding Type Tender
Location
City Udhampur
State Jammu and Kashmir
Key Dates
Publish Date 08 Sep 2026
Submission Date 29 Sep 2026
Open Date 03 Oct 2026
Finance
Tender Value 45 Lakhs
Tender Fee 500
EMD 90000
Exemption Available
Document List
BOQ_883532.xls
fbca889e-c046-4ea3-8dea-af8eaa589835.html
Tender.pdf
Tendernotice_1 (10).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 08, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 29, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 15 days
Oct 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_883532.xls

html

fbca889e-c046-4ea3-8dea-af8eaa589835.html

pdf

Tender.pdf

pdf

Tendernotice_1 (10).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders