Tender For special Repair To Operation Work Shelter No 5047/07 And (Defense Security Corps Other Rank Living) And 5116/15 (Jco Living) Of 301 Army Avn Sqn (Spl Ops) At Mil Stn Haldwani Under Ge Ranikhet
Tender Value
46.05 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
0 days left
EMD
92200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nainital → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Operation Work Shelter No 5047/07 And (Defense Security Corps Other Rank Living) And 5116/15 (Jco Living) Of 301 Army Avn Sqn (Spl Ops) At Mil Stn Haldwani Under Ge Ranikhet
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Sep-2026 | CorrigendumNo3 | Date | 23-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. |
| 2 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins, post where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 3 | S&F MS work as in wind ties for roof including securing bolts complete all as specified and as directed. |
| 4 | Dismantling boarding, any description, fixed in any position with screw complete all as specified and directed. |
| 5 | Dismantling floor, hearth, wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises. |
| 6 | M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete. |
| 7 | M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match complete all as specified.. |
| 8 | M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified. |
| 9 | Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete. |
| 10 | Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete. |
| 11 | S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified. |
| 12 | S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, sliding, openable or fixed type glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, 2 x Tower Bolt 150 mm, anodised aluminium snap beading, screws etc. complete all as specified. |
| 13 | Supply & fixing powder coated aluminium windows and ventilator shutters,sliding or fixed type without sash bars , aluminium section weighting 0.55 kg / m including necessary joining cleats , glazing clips ,roller, rubber packing, anodised aluminium snap beading , screws,anodised aluminium fitting such as peg stays hinges,handle,locking device, louvers, rollers etc. complete all as specified. (Note:- Glass pane and mesh will be measured and paid separately ) |
| 14 | Supply and fixing powder coated designer grill of 5.5 mm dia and aperture of 75 mm fixed with and including aluminium powder coated flat section of size 50 x 1.5 mm complete all as specified and directed. |
| 15 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and as directed |
| 16 | S&F Sheet glass 4.8mm thick tinted glass and glazing in squares completeall as specified and directed. |
| 17 | Supply & fixing aluminium sheet powder coated of thickness not less than 5mm thick to be in sealed as panel in aluminium door including fixing complete all as specified and directed. |
| 18 | S&F 150 mm overall length floor stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed |
| 19 | S&F Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 250 mm long complete. |
| 20 | S&F for door closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed |
| 21 | S&F Factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising of PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wwod powder/ rick husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded stat headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge |
| 22 | S&F Factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge (Note:- stainless steel butt hinges shall be paid separately. |
| 23 | S & F 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 24 | S & F aluminium handle, cast type anodized 150mm size complete all as specified and as directed. |
| 25 | S&F Butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed. |
| 26 | M&L for two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on new steel surfaces over 10cm width or girth including preparation of surface complete. |
| 27 | M&L for two coat of synthetic enamel paint to old decorated steel surfaces of girth exc 10cm including preparation of surfaces complete |
| 28 | Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings. |
| 29 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering /cladding to wall, fixed with self tapping screws as specified complete all as specified |
| 30 | S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, valley gutter, chajja /cladding to wall, fixed with self tapping screws as specified complete all as specified |
| 31 | Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level). |
| 32 | M&L 75mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection incl finishing even and smooth w/o using extra cement. |
| 33 | M&L for 25mm thick PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in level course with finshining in cement concrete surface even and rough to receive screed bed complete all as specified and directed. |
| 34 | M&L for providing PCC 1:2:4 type B-0 as in roof kerbs or mud stops rouded or chamfered on edges (using 12.5mm graded stone aggregate) complete all as specifed and directed. |
| 35 | Demolition of brick work built in cement mortar all as specified and directed. |
| 36 | M&L for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed. |
| 37 | Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc complete. all as specified and directed. |
| 38 | M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) etc. incl finishing even and fair complete all as specified NOTE -WPC shall be measured and paid separetely. |
| 39 | Supply only WPC complete all as specified and directed. |
| 40 | M&L Preparing newly plastered surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and as directed |
| 41 | M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement complete. |
| 42 | Dismantling wall and ceiling boards, any thickness incl cover fillets complete all as specified and directed. |
| 43 | S&F powder coated aluminium snap grid frame work for false ceiling size of grid 605 mm x 605 mm with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified complete all as specified and directed. |
| 44 | Supply & fixing 4mm thick non asbestos E-board cememt building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed. |
| 45 | S&F thermocol sheet 30mm thick as in false ceiling to reduce to heat in Ist floor roof ceiling complete all as specified and as directed. |
| 46 | S&F in repair Decorative Stainless steel tubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and materail approved by Engineer-in-charge) complete all as specified and directed. |
| 47 | S&F in repair 50mm thick prefabricated puf panel factory made, the panels comprise of PUF bonded between two sheet of precoated GI sheets of 0.5 mm thick and effective sealing at joints, without disturbing the surrounding undamaged panels or the supporting structural members complete all as specified and as directed. |
| 48 | M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth. |
| 49 | Taking up or down GI Water Tubing 15mm dia (bore) including Connections and Fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and as directed. |
| 50 | -ditto- all as per Item No. 49 here–in–before, but for 25mm dia (Bore). |
| 51 | Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 52 | -ditto- all as per Item No. 51 above here–in–before, but for 25mm dia (Bore). |
| 53 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete. |
| 54 | M&L precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 including necessary form work complete all as specified and directed. (reinforcement to be measured separately) |
| 55 | M & L for mild steel TMT bars ,10mm dia and over , cut to length , bent to shspe required incl cranking , bending spirally for hooping for coloumns , hooking ends andbionding with (annealed) not less than 0.90 mm dia all a specified and directed |
| 56 | M & L RCC ( 1:2:4) type B-1 using 20mm graded stone aggregate in slabs supported on walls, beams & columns complete all as spd (reinforcement to be measured separately). |
| 57 | M& L for Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, for rough finished flat surfaces of concrete complete. |
| 58 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed of 15 mm thick 1:6 complete all as specified and directed by Engineer in charge. |
| 59 | Supply & fixing in repair PVC (SWR) 110 mm dia pipes single socketed, in any length laid in trenches or in floors with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as specified and directed. |
| 60 | S&F repair 15mm dia fancy type bib taps CP Brass with Capstanhead, screwed down, screwed for iron pipe of bore 15mm complete. |
| 61 | S&F in repair brass Chromium plated Basin Mixer valve hot and cold screwed down for iron pipe complete . |
| 62 | S&F in repair Brass CP Wall mixer for mixing hot & cold water (2 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified |
| 63 | S&F in repair PVC Connections 15mm size with PTMT Nuts of length 600mm and fixed, complete all as specified and as directed. |
| 64 | S&F in repair Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 65 | S&F in repair Brass chromium plated shower rose 125mm size with shower arm, including fixing to steel pipe or union complete all as specified and directed. |
| 66 | Supply & Fixing in repair tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges all as specified. |
| 67 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as approved by Engr-in-Charge |
| 68 | S&F Corner Glass Shelf 300mm (with ABS Brackets) 300 x 300mm as approved by Engr-in-Charge |
| 69 | S&F repair Peg Set of 6 Stainless Steel as approved by Engr-in-Charge |
| 70 | S&F in repair Soap Dish Stainless Steel complete all as specified & directed. |
| 71 | S & F in repair Stainless Steel grating 100mm dia complete all as specified. |
| 72 | S&F vitreous China squatting pan, Orissa pattern incl CI trap Fix inrepair, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed. |
| 73 | S&F in repair Vitreous China wash downwater closet pan (pedestal pattern), white/coloured (including fixing bolts & flush pipe, plastic water closet seat,black, closed pattern with bottom, and cover and mild steel chromium plated or aluminised hinging device etc.) complete all as specified and directed by Engineer-in-Charge |
| 74 | S&F in repair PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed. |
| 75 | S & F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and as directed incl making joint water tight. |
| 76 | S&F in repair vitreous china wash basin, white, flat back, size 550mm x 400mm, including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed. |
| 77 | S&F Vitreous China Urinal, full stall type, including, urinal spreader, waste coupling and waste pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and Union for discharge pipe complete all as specified and as directed. |
| 78 | S&F selected quality looking mirror bevelled edge 5.5mm thick selected quality glass, mounted on 6mm thick commercial plywood, including moulding of all round edges of looking mirror and fixed to wooden plug with 4 nos CP brass screwed cup washers complete all as specified and directed. |
| 79 | Excavation in trenches not exc. 1.50m wide and not exc. 1.50m in depth for foundation etc or for manholes cesspits, shafts etc not exc 10 sqm on plan and getting out in hard / dense soil complete all as specified and directed. |
| 80 | Removing excavated soil to a distance n.exc 50m where directed at a level n.exc 1.50m above the starting point complete all as specifed and directed. |
| 81 | Return filling , in including spreading , levelling , watering and levellng and well ramming in layers not exc 25 cm compleate all as specified and directed. |
| 82 | Dismantling water tanks of capacity exc 500 butn.exc 1000ltrs complete. |
| 83 | S&F rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 25mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed. |
| 84 | M&L For PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete. Please Enable Macros to View BoQ information |
| 85 | M&L For PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 23, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender