Tender For Special Repair Of Bldg. No P-142 Black Charger Polyclinic At Shivaji Enclave Under Ge (North) Bathinda At Bathinda Mil Stn
Tender Value
22.82 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
2 days left
EMD
45640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Bldg. No P-142 Black Charger Polyclinic At Shivaji Enclave Under Ge (North) Bathinda At Bathinda Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast as required complete all as specified and as directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4 Sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast as required complete all as specified and as directed. |
| 3 | Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames/ Chowkhat (double Rebated) of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed.Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 4 | Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames/ Chowkhat (double Rebated) of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed.Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 5 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges of size 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked.(b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf(d) Stainless Steel (304 Grade) Finished Sliding door Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020. |
| 6 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) glazed/gauge skelton door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with butt hinges with necessary full body threaded star headed counter sunk S.S screws including S&F wire cloth complete all as specified and as directed including supply and fixing following items:- (a) Stainless Steel (304 Grade) Finished Butt Hinges of size 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked.(b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf(d) Stainless Steel (304 Grade) Finished Sliding door Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020.(e) Stainless Steel (304 Grade) (natural finish) wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm, fixing as per manufacture |
| 7 | Note for WPC/uPVC Frame/window/shutter(i) Test certificate of Manufacturer to be provided by contractor.(ii) Embossing with Barcode of Manufacturer engraved over each door Frame & shutter is mandatory. (iii) Cost for making good to cutting holes/dismantled portion during taking down old with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate or cement mortar (1:3) shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. (iv) The cost of all other connected accessories, fixing material shall deemed to be included in the quoted unit rate. |
| 8 | Providing and fixing aluminium work with Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make confoRunning Metering to 15.733 and 15 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions e at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including aluminium cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and directed by Engineer-in-charge.Note: (1) Weight of aluminium sections, aluminium cleat angles, Aluminium snap beading shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of aluminium at site.ii) The rate of material and labour for providing the EPDM rubber, neoprene gasket, C.P. brass/ stainless steel screws ( is included in this item and nothing shall be paid extra on this account. (During considering the weighing of aluminium sections, aluminium cleat angle, Aluminium snap beading, the weight of EPDM rubber, neoprene gasket, C.P. brass/ stainless steel screws shall not be considered for measuRunning Meterents and payments, only the weight of the aluminium sections, aluminium cleat angles, Aluminium snap beading shall be considered and measuRunning Meterent and payment shall be made accourdingly . (iv) Glazing/Paneling shall be measured and paid seperately.(v) During the weighing of aluminium sections, aluminium cleat angle, Aluminium snap beading the weight of polyester powder coating 50 micron shall not be considered for weight but the rate of material and labour for providing polyester powder coating 50 micron is included in this item and nothing shall be paid extra on this account. |
| 9 | Supplying and fixing 5 mm thick selected quality figured sheet glass in glazing, including cutting to the required size, fitting in position, and providing and fixing rubber beading complete, all as specified.Note: The rate shall include the cost of providing and fixing rubber beading complete. Nothing extra shall be paid on this account. |
| 10 | Supplying and fixing 5 mm thick black tinted sheet glass of selected quality in glazing, including cutting to size, fixing in position, and providing and fixing rubber beading complete.Note: The rate shall include the cost of providing and fixing rubber beading complete. Nothing extra shall be paid on this account. |
| 11 | Supplying and fixing stainless steel wire cloth, 0.36 mm nominal diameter of wire with average aperture width of 1.40 mm, fixed complete in position with necessary screws, washers/clips and all other incidental items, all as specified. |
| 12 | Supply and fixing in replacement stainless steel chromium plated pipe 25mm dia, wall thickness of pipe not less than 20 guage, as curtain rod fixing with and including fancy type brackets and decorated end knobs (finials), stop roller etc, fixed on wall for doors and windows curtains, cuttings as required length and fixing at site including fixing arrangements, rawl plug, screws etc. including taking out old any type rod or pelmet boxes with curtain rod complete all as specified & directed by Engineer-in- charge. |
| 13 | Supply & fixing in replacement stainless steel sink, AISI 304 quality grade, made out of 1.00mm thick sheet, glossy finish, for kitchen or laboratory, with plugs, washers, waste coupling, waste pipe (flexible) 800mm long, including bedding in cement mortar to dwarf wall or fixing cast iron cantilever brackets and connecting union to waste pipe; overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and as directed. |
| 14 | Dismantling brick tiles or terracing tiles in a single layer from roof, including careful removal and disposal of the dismantled material to a distance not exceeding 100 m, complete, all as specified and as directed by the Engineer-in-Charge.Note: The rate shall include dismantling, stacking/retrieval of serviceable materials (if any), loading, unloading, and disposal of unserviceable materials within 100 m. Nothing extra shall be paid on this account. |
| 15 | Dismantling mud filling in roofs of any thickness, including plastering and leeping, whether removed in full or in part, and disposing of the dismantled material/rubbish to a distance not exceeding 500 m, complete, all as specified and as directed by the Engineer-in-Charge.Note: The rate shall include dismantling, collection, loading, transportation, unloading, and disposal of dismantled material within 500 m. Nothing extra shall be paid on this account. |
| 16 | Material and Labour for Water proofing tratment to existing roof / terrace (material of water proof treatment as approved by GE) Single component, acrylic based, flexible, micro fibre reinforced waterproofing and heat reflective coating system. the treatment shall be carried out as per the manufacturers instructions and shall include the followings:(a) Preparation of substrate and cleaning it off all loose and triable by mechanical means(b) Open the cracks lines to form , V grooves with cutter/hammer/chisel up to 5-10mm and filling with crack filler and PU sealant.(c) application of primer coat @ 0.2 to 0.3 kg/ sqm followed by the first coat @ 0.75kg/ Sqm.(d) The second coat shall be applied @ 0.75 kg / Sqm and reinforced with fabric re-inforcement between the first and second coat.(e) The top coat of primer shall be applied after the second coat dries off @ 0.05-0.08 Kg per Sqm.(f) The material shall adhere to following specification. TECHNICAL SPECIFICATION OF MATERIALTensile Strength 1.5 MPa ASTM D412Elongation at Break > 200% ASTM D412Adhesion in Peel > 1.5 MPa (on concrete substrate) EN 1542Crack Bridging Ability Passes upto 3.2mm Width ASTM C1305Permeability to Water Vapour Passes IS 2645Water Vapour Transimission ~ 23 g/m²/24hr ASTM E96Water Absorption < 10% ( by Mass) ASTM D570Microbiological Resistance No Algae & Fungal Growth ASTM D5590Solar Reflectance Index 102 ASTM E1980.Note : Complete material shall be approved by GE and procured in bulk and kept in lock and key.Note : The installation company should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the particular manufacturer can only be used with official approval from manufacturer in consultation with GE. |
| 17 | Material and Labour for 40mm average thick PCC padding in 1:2:4 Type B-1 (using 20mm graded stone aggregates) as in roof slab finishing the surface even and fair using Liquid water proofing compound complete all as specified and directed. Liquid Water proofing compound shall be measured and paid separetly as supply only under appropriate item of Schedule 'A' BoQ.Note: Liquid waterproofing compound shall be measured and paid separately as supply only under the appropriate item of Schedule 'A' of BOQ. The rate shall include all other materials, labour, mixing, laying, finishing, curing and incidental works required for completion. Nothing extra shall be paid on this account. |
| 18 | Providing material and labour for cement slurry @ 1.2 kg/sqm, spreading with bristle brush and rendering 15 mm average thickness in cement mortar 1:3 over roof surface, finished even and fair, including mixing with liquid waterproofing compound @ 200 ml per 50 kg cement bag, complete as specified and as directed by the Engineer-in-Charge.Note: Liquid waterproofing compound shall be measured and paid separately under the appropriate item of BOQ. The rate shall include all other materials, labour, surface preparation, application, finishing, curing and incidental works required for completion. Nothing extra shall be paid on this account. |
| 19 | Providing material and labour for making benching with cement concrete 1:2:4, Type-B0, using 12.5 mm graded stone aggregates, with liquid waterproofing compound as per manufacturer's instructions, along side walls adjoining to roof in concave shape, complete as specified and as directed by the Engineer-in-Charge.Note: Liquid waterproofing compound shall be measured and paid separately as supply only under the appropriate item of Schedule 'A' of BOQ. The rate shall include all other materials, labour, mixing, laying, finishing, curing and incidental works required for completion. Nothing extra shall be paid on this account. |
| 20 | Supply only liquid waterproofing compound, complete as per manufacturer's instructions and as directed by the Engineer-in-Charge.Note: The material shall conform to the approved specifications and shall be supplied in original sealed containers. Nothing extra shall be paid on this account. |
| 21 | Supplying and fixing 16 mm CPVC pipe SDR-11 with plain CPVC SDR-11 fittings, including all necessary fittings, fixing to walls and ceilings or laying in floors, with 15 mm internal bore, complete as specified and as directed by the Engineer-in-Charge, including dismantling and taking down existing G.I. tubing and disposal of dismantled material.Note: The rate shall include all materials, fittings, supports, clamps, cutting, jointing, testing, labour and incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 22 | Supplying and fixing 20 mm CPVC pipe SDR-11 with plain CPVC SDR-11 fittings, including all necessary fittings, fixing to walls and ceilings or laying in floors, with 15 mm bore of pipe, complete as specified and as directed by the Engineer-in-Charge, including dismantling and taking down existing G.I. tubing.Note: The rate shall include all materials, CPVC fittings, supports, clamps, cutting, jointing, testing, labour and incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 23 | Supplying and fixing in replacement three-layer 500 litre HDPE water storage tank (Polyproof), white in colour, rotational moulded polyethylene, cylindrical vertical type with closed top, including hoisting and fixing in position, providing and fixing suitable size inlet/outlet arrangements and other necessary accessories, complete as specified and as directed by the Engineer-in-Charge.Note: Overflow pipes and ball valves shall be measured and paid separately as supply and fixing under the appropriate items of Schedule 'A' of BOQ. The rate shall include all materials, labour, shifting, hoisting, fixing, connections and incidental works required for completion. Nothing extra shall be paid on this account. |
| 24 | Supplying and fixing in repair high pressure ball valve of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of size 20 mm bore, weighing minimum 210 gms, complete as specified and as directed by the Engineer-in-Charge.Note: The rate shall include all materials, fittings, fixing, testing, labour and incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 25 | Supplying and fixing in repair stop cock with butterfly handle, screwed both ends, suitable for iron pipe of 20 mm diameter, ISI marked, complete as specified and as directed by the Engineer-in-Charge.Note: The rate shall include all materials, fittings, dismantling of existing stop cock (if required), fixing, jointing, testing, labour and incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 26 | Supplying and fixing in repair waste pipe/low density polyethylene (LDPE) pipe of pressure rating 6 kg/sqcm, 32 mm bore, including necessary fittings, jointing, fixing and testing complete, all as specified and as directed by the Engineer-in-Charge.Note: The rate shall include all materials, labour, fittings, supports, cutting, jointing, testing and incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 27 | Supplying and fixing in replacement vitreous china wash down water closet pan (pedestal pattern EWC), P-trap, white colour, including connection to drain, providing and fixing plastic water closet seat with cover (white colour), closed pattern with flat bottom and mild steel chromium plated/aluminised hinging device, including stainless steel chromium plated jet spray with 1 metre long PVC pipe with CP connector, necessary nuts, bolts, CP screws and plugs for fixing WC, complete as specified and as directed by the Engineer-in-Charge.Note: The rate shall include all materials, fittings, accessories, labour, dismantling of existing WC, fixing, connections, testing and incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 28 | Supplying and fixingin repair vitreous china squatting pan “Orissa” pattern, white colour, size 580 mm x 440 mm with integral foot rests, excluding flushing cistern, flush pipe above floor and trap, including demolition of existing tiles, PCC and lime concrete, taking out old WC and lime concrete filling, and refilling with lime concrete (1 lime : 2 sand or surkhi : 5 aggregate), minimum 150 mm thick all round, finished just below rim level to receive floor finish. The item includes fixing PVC flush pipe up to finished floor level, making leakproof joints with trap, testing before concreting and all connected works complete as specified and as directed by the Engineer-in-Charge.Note: The rate shall include dismantling, removal of existing fittings, disposal of debris, supply of all materials, labour, fixing, jointing, testing and all incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 29 | Supplying and fixing in repairs vitreous china wash hand basin, white colour, flat back, size 550 mm x 400 mm, including cutting and pinning in ends of brackets or fixing on stand, providing and fixing 32 mm dia PTMT waste coupling (half or full threaded) of minimum weight 45 gms for 32 mm, and 32 mm dia PVC flexible waste pipe 800 mm long, including dismantling of existing basin if required, making good disturbed portions and all connected works complete as specified and as directed by the Engineer-in-Charge.Note: The rate shall include all materials, fittings, accessories, labour, dismantling, fixing, connections, testing and incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 30 | Supplying and fixing in repair PVC low level flushing cistern of 10 litre capacity, valveless, syphonic action type, white colour, including inlet, ball valve, float, handle, brackets and 32 mm dia PVC flush pipe of low density/high density PVC for low level cistern, complete as specified and as directed by the Engineer-in-Charge.Note: The rate shall include all materials, fittings, accessories, dismantling of existing cistern (where required), fixing, connections, testing, labour and incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 31 | Supplying and fixing in repair PVC connection of 15 mm size with PTMT nuts, 600 mm long, complete as specified and as directed by the Engineer-in-Charge.Note: The rate shall include all materials, fittings, fixing, jointing, testing, labour and incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 32 | Supply and fixingin repair Angular Stop Cock with wall flange, CP, screwed down, screwed for 15mm bore brass ferrule or for union and fixed in position complete all as specified and as directed.Make : Jaquar Cat No. VGP-81053 or Techno commercial equivalent in make mentioned in Appendix 'B' |
| 33 | Supplying and fixing in repair chromium plated soap dish, size 160 mm x 160 mm x 90 mm, fixed to wall with plugs and chromium plated screws, complete as specified and as directed by the Engineer-in-Charge.Note: The rate shall include all materials, accessories, fixing, labour, dismantling of existing soap dish (if required), and making good disturbed portions. Nothing extra shall be paid on this account. |
| 34 | Supply and fixing in replacement of chromium plated overhead shower, 100 mm diameter, complete with 450 mm long × 20 mm diameter round shower arm with 90° bend for wall-mounted installation, including matching wall flange and all necessary accessories, fittings and fixtures as recommended by the manufacturer for proper fixing and operation, including dismantling/removal of the existing shower assembly, making leak-proof connections, testing for satisfactory performance and water flow, and fixing in position, complete in all respects, all as specified and as directed by the Engineer-in-Charge.Make: Jaquar (Overhead Shower Cat. No. OHS-1989 and Shower Arm Cat. No. SHA-479L450) or techno-commercial equivalent make approved and listed in Appendix ‘B’. |
| 35 | Supply and fixing in repairs concealed type stop cock, cast copper alloy, fancy type chromium plated, with crutch or butterfly handle, screwed down type, suitable for 15 mm bore GI pipe or brass ferrule or GI socket or PPR pipe, including dismantling of existing fittings if required and making good disturbed portion, complete all as specified and directed by the Engineer-in-Charge. |
| 36 | Supply and fixing Bib taps, CP, long body with wall flange screwed for 15mm bore brass ferrule and fixed in position complete all as specified and as directed.Make : Jaquar (Cat No. VGP-81037) (VIGNETTE Prime) or equivalent from Cera (Valentina Single Lever Series) or equivalent from Hindware (Fluid Series) or Techno commercial equivalent in make mentioned in Appendix 'B' |
| 37 | Supply & fixing single towel rail 600mm long stainless steel, including taking out any type towel rail/ring complete all as specified and as directed.Make : Jaquar Cat No. CAN-GBP1111S M or Techno commercial equivalent in make mentioned in Appendix 'B' |
| 38 | Supplying and fixing in repairs 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick A.C. building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete as specified and as directed by the Engineer-in-Charge.Note: The rate shall include all materials, accessories, fixing, labour, dismantling of existing mirror (if required), and making good disturbed portions complete. Nothing extra shall be paid on this account. |
| 39 | Supplying and fixing 110 mm bore uPVC (SWR) Type-B ring fit pipes, single socketed, in any length, including providing and fixing stack clamps as shown in BTD Drawing No. 916 Sheet 1/4 to 4/4 and BTD-917 Sheet 1/1, with stays fixed to walls at a distance of 100–120 mm away from the wall, complete as specified and as directed by the Engineer-in-Charge. The item includes taking down old A.C. eaves gutters and rainwater pipes of any size and pattern, including all fittings, and disposal of dismantled material, complete in all respects.Note: The rate shall include all materials, uPVC SWR pipes, sockets, clamps, stays, fittings, dismantling, removal, fixing, jointing, testing, labour and all incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 40 | Supplying and fixing 110 mm bore uPVC (SWR) floor trap, plain type with grating, including jointing with solvent cement, complete as specified and as directed by the Engineer-in-Charge.Note:The rate shall include all materials, uPVC SWR floor trap with grating, solvent cement, jointing, fixing, testing, labour and incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 41 | Supplying and fixing 110 mm bore uPVC (SWR) gully trap, including setting in position and jointing with solvent cement, complete as specified and as directed by the Engineer-in-Charge.Note: The rate shall include all materials, uPVC SWR gully trap, solvent cement, jointing, setting, fixing, testing, labour and incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 42 | Supplying and fixing 110 mm bore uPVC (SWR) fittings, Type-B, such as bends, tees, shoes etc., fixed to uPVC pipes, including jointing with solvent cement, complete as specified and as directed by the Engineer-in-Charge.Note: The rate shall include all materials, uPVC SWR fittings, solvent cement, cutting, jointing, fixing, testing, labour and incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 43 | Supplying and fixing 50 mm bore uPVC (SWR) pipe Type-B, single socketed, as overflow pipe for water tank in any length, including rubber ring jointing, fixing to walls with projected M.S. clamps of size 25 mm x 3 mm at 1.2 m interval, making good openings with cement mortar 1:3, complete as specified and as directed by the Engineer-in-Charge.Note: The rate shall include all materials, uPVC SWR pipe, rubber rings, M.S. clamps, jointing, cutting, fixing, making good openings, testing, labour and all incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 44 | Supplying and fixing 50 mm bore uPVC (SWR) fittings, Type-B, such as bends, tees, shoes etc., fixed to uPVC pipes, including jointing with solvent cement, complete as specified and as directed by the Engineer-in-Charge.Note: The rate shall include all materials, uPVC SWR fittings, solvent cement, cutting, jointing, fixing, testing, labour and incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 45 | Supplying and fixing 100 mm dia uPVC Type-B (SWR) branch piece, single (single Y), equal or unequal branch, ordinary or inverted type or with parallel branches, complete as specified and as directed by the Engineer-in-Charge.Note: The rate shall include all materials, uPVC SWR branch piece, fittings, solvent cement/rubber ring jointing (as applicable), cutting, fixing, testing, labour and incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 46 | Supplying and fixing 50 mm dia uPVC (SWR) vent cowl, complete as specified and as directed by the Engineer-in-Charge.Note: The rate shall include all materials, uPVC SWR vent cowl, fittings, jointing materials, fixing, testing, labour and incidental works required for complete installation. Nothing extra shall be paid on this account. |
| 47 | Taking down cement plaster of any description and any thickness from internal and external surfaces of walls, soffits, chajjas, parapet walls, ceilings etc., including raking out joints, hacking for keys, scrubbing down with water and all necessary operations complete as specified and as directed by the Engineer-in-Charge.Note: The rate shall include dismantling/removal of plaster, cleaning of surface, disposal of debris within specified lead, labour, tools and all incidental works required for complete execution. Nothing extra shall be paid on this account. |
| 48 | Material and labour for plastering 15mm thick with ready mix cement plaster material on external surface of Brick walls/chajja/fins or concrete surfaces, finished even and fair complete all as specified and as directed. |
| 49 | Material and labour for plastering 12mm thick with ready mix cement plaster material on internal surface of Brick walls or concrete surfaces, finished even and fair complete all as specified and as directed. |
| 50 | Material and labour for cement plastering 5 mm thick in ready mix plaster on fair faces of concrete ceiling surfaces, finished fair and even without using extra cement, complete as specified and as directed by the Engineer-in-Charge. |
| 51 | Supplying only Liquid Water Proofing Compound, complete as specified and as directed by the Engineer-in-Charge. Make: As described in the LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after. |
| 52 | Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/ chajjas/roof projections etc with mechanical means/grinder complete all as specified and directed by Engineer-in- Charge. |
| 53 | Material and labour for preparation of new plastered surfaces, surface´after complete removal, applying acrylic putty on internal surfaces of walls/ceiling/soffits etc (thickness vary from 1.5 to 2 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using readymade putty, including sanding with wall sander after filling the putty in first coat/second coat to make surface smooth and ready for receiving interior/exterior painting complete all as specified and as directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.Make of acrylic Putty: - Berger / Asian / Nerolac |
| 54 | Material and labour for applying 02 coats of interior acrylic emulsion paint of approved tint/shade (Company Depot Tinted) @ 14.5 sq.m/litre/2 coats to wall surfaces (new or old prepared internal surface after complete removal and applying putty) over and including a coat of interior primer @ 11 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using paint roller brush complete all as specified and as directed.Note ;- Complete removal and putty shall be measured and paid separately under respective item of BOQ.Brand and Make of interior acrylic emulsion paint: - Silk Glamour of Berger / Royal Aspira of Asian / Impression Eco Clean of NerolacBrand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac |
| 55 | Material and labour for applying 02 coats of exterior acrylic emulsion paint of approved tint/shade (Company Depot Tinted) @ 6 sq.m/litre/2 coats to external walls / Soffits of Chajjas / Roof Projections / Cantilevers / Balcony etc. (new or old prepared external surface after complete removal) over and including a coat of exterior primer @ 11 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using airless spray gun complete all as specified and as directed.Note ;- Complete removal shall be measured and paid separately under respective item of BOQ.Brand and Make of exterior acrylic emulsion paint: - Weather Anti Dust of Berger / Apex Ultima of Asian / Excel Mical |Marble of NerolacBrand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac |
| 56 | Providing material and labour for preparing new plastered surfaces of ceilings and applying three coats of white wash with lime, including slaking of fresh unslaked lime at site, preparation of lime cream by mixing with water, screening through clean coarse cloth after 24 hours, addition of gum dissolved in hot water @ 1 kg per cubic metre of lime cream, addition of sodium chloride dissolved in hot water @ 1.3 kg per 10 kg of lime, addition of ultramarine blue up to 3 gm per kg of lime in the last two coats, thorough stirring of solution before use, and applying three coats of white wash complete in all respects as specified and directed by the Engineer-in-Charge. |
| 57 | Providing material and labour for preparing existing treated surfaces of ceilings including cornices and applying two coats of white wash with lime, including preparation of lime white wash by slaking fresh unslaked lime at site, mixing and stirring with approximately 5 litres of water per kg of unslaked lime to make a thin cream. The cream shall be allowed to stand for 24 hours and then screened through clean coarse cloth. Gum dissolved in hot water @ 1 kg per cubic metre of lime cream and sodium chloride dissolved in hot water @ 1.3 kg per 10 kg of lime shall be added for making the coating hard and rub-resistant. Small quantity of ultramarine blue up to 3 gm per kg of lime shall also be added to the white wash solution. The solution shall be thoroughly stirred before use and applied in two coats on existing treated ceiling surfaces including cornices, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 58 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but excluding backing), carefully removing serviceable tiles and stacking them at a designated place for reuse, removing unserviceable materials and carting away rubbish/debris off the premises, including all labour, tools and equipment required for complete removal, cleaning and disposal, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 59 | Material and Labour for Virified Ceramic tiles,double charged light shade 9 to10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors /skirting etc. including 10 mm thick bedding layer using type-I adhesive (thick bed fixing ) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile including necessary cutting as per site requirement complete all as specified and as directed by Engineer-in-Charge. |
| 60 | Material and Labour for anti slip coloured ceramic tiles 7 to 8mm thick (square/rectangular) of Size exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc in floors and skirting etc. including 10 mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile including necessary cutting as per site requirement complete all as specified and as directed by Engineer-in-charge. |
| 61 | Material and Labour for glazed ceramic coloured tiles 7.5 mm to 8.5mm thick 300mm x 600mm size in verticle surface including 10mm thick backing coat using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement etc complete all as specified and as directed by Engineer-in-charge. |
| 62 | Providing and fixing material and labour for Baroda Green Marble work 15–16 mm thick (table rubbed and polished) in shelves, steps, landings, cills, skirting, borders, jambs, pillars, window cills, cooking platforms and similar works, including cutting, dressing, laying and fixing in cement mortar (1:4), polishing complete, and pointing with white cement (1:2) mixed with marble dust and pigment to match the shade of marble, including all necessary labour, materials, tools and equipment, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 63 | Providing material and labour for rounding of one edge of stone slabs, such as in steps, cooking platforms and other similar situations, including cutting, dressing, forming smooth rounded edges, polishing and finishing to match the existing stone surface, complete with all necessary tools, materials and labour as specified and directed by the Engineer-in-Charge. |
| 64 | Material and labour for 75 mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, hard standing, path etc, laid in suitable panels not exceeding 3.00 m length finished even and smooth without using extra cement, 10mm Joints filled with bituminous sealing compound of grade ‘A’/bitumen mastic filler/sealant complete all as specified. |
| 65 | Demolition of reinforced cement concrete (RCC) work of any description and in any position, including breaking, dismantling, removal of demolished concrete, handling, stacking/disposal of debris away from the site, and all necessary labour, tools and equipment required for complete execution, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 66 | Providing material and labour for reinforced cement concrete (RCC) work in 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate) using 12.5 mm graded stone aggregate for chajjas, parapets, fins, facias, cupboard shelves and similar works, including mixing, laying, compacting, curing, finishing and all necessary materials, labour, tools and equipment required for complete execution as specified and directed by the Engineer-in-Charge. |
| 67 | Providing material and labour for reinforcement work using MS TMT bars of Fe 550D grade, 6 mm to 8 mm diameter and above, including cutting to required lengths, bending to required shapes, placing and fixing in position, and binding with MS annealed binding wire not less than 0.9 mm diameter, complete with all necessary labour, materials, tools and equipment as required for RCC work, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 68 | Providing material and labour for use and waste formwork to soffits and sides of chajjas, parapets, cupboard shelves and similar RCC works, including providing, fixing and removal of shuttering/formwork for flat fair finished concrete surfaces, ensuring proper line, level and alignment, including all necessary materials, labour, tools and equipment, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 69 | Excavation in trenches in soft/loose soil not exceeding 1.5 metre in width and not exceeding 1.5 metre in depth for foundations of manholes, sewerage pipe lines and other similar works, including setting out, excavation, getting out the excavated earth, dressing the sides and bottom, and all necessary labour, tools and equipment required for complete execution, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 70 | Returning/filling in excavated earth including refilling around foundations, trenches and other locations, spreading in layers not exceeding 25 cm thick, watering each layer and well ramming/compacting to achieve proper consolidation, including dressing, levelling and all necessary labour, tools and equipment, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 71 | Demolition and breaking up of drain pipes including stoneware glazed (SGSW), asbestos cement (AC) or reinforced concrete pipes up to and including 150 mm bore, including excavation where required, breaking, removal of dismantled pipes, disposal of debris and all necessary labour, tools and equipment required for complete execution, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 72 | Supplying and fixing, providing, lowering and laying HDPE Double Wall Corrugated (DWC) pipes (SN8) conforming to IS:16098 (Part 1):2013, 150 mm internal diameter, including demolition and removal of existing pipeline where required, laying and jointing with elastomeric sealing ‘O’ ring as per manufacturer’s instructions. The work shall include laying of pipes to required levels and gradients in trenches, on concrete bed or directly on hard ground as indicated, providing necessary extra joints, cutting, wastage, testing of pipeline and all incidental works complete in all respects as specified and directed by the Engineer-in-Charge. |
| 73 | Material and labour for PCC (1:4:8), Type D-2, using 40 mm graded stone aggregate as concrete bed for 150 mm bore DWCPE pipes, laid to required slope, including packing under and haunching around the sides of pipes after laying and testing, including necessary formwork, complete all as specified and directed by the Engineer-in-Charge.Notes:(i) Thickness of concrete bed below the barrel of pipe shall be 10 cm.(ii) Width of concrete bed shall be outer diameter of drain pipe (excluding sockets/collar) plus 30 cm.(iii) Excavation, earthwork, and returning filling shall be measured and paid for separately under appropriate items of Schedule ‘A’ BOQ. |
| 74 | Cutting into existing manholes for connecting new drains, including cutting and removal of existing manhole wall/benching for connecting 150 mm diameter pipe, making good around the pipe connection, rendering and finishing of affected surfaces, including all necessary materials, labour, tools and equipment required for complete execution as specified and directed by the Engineer-in-Charge. |
| 75 | Removing excavated soil for a lead distance not exceeding 50 metres and depositing the same at the place directed, including loading, carrying, unloading, spreading and dressing at the disposal site, with height of lift not exceeding 1.5 metres above the starting point, complete with all necessary labour, tools and equipment as specified and directed by the Engineer-in-Charge. |
| 76 | Supply and fixing in replacement of C.P. brass pillar tap, long neck type with aerator, screwed to 15 mm bore brass ferrule/PVC connection and fixed in position, including dismantling/removal of the existing pillar tap, providing necessary jointing materials, making leak-proof connections, testing for satisfactory operation and leakage, and making good any disturbed surface, complete in all respects, all as specified and as directed by the Engineer-in-Charge.Make: Jaquar (Cat. No. CON-021KN) or techno-commercial equivalent make approved and listed in Appendix ‘B’. |
| 77 | Supply and fixing Gl powder coated frame work 605 mm X 605 mm for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and duly suspended with 4mm GI wire hangers (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including providing 600x600x10-12mm thick ceiling mineral fibre board in grid fixed in false ceiling grid as per above specifications including taking down old ceiling complete all as specified and as directed by Engineer-in-Charge. |
| 78 | Supplying and fixing hollow PVC lining using 5 mm thick plain-colour PVC sheets, including solvent cement, complete with fixing on PVC framework at site. The work shall include all materials, labour, tools, and accessories required for proper installation, complete in all respects, including Dismantling of wall panelling of any type including cover fillet and frame work complete all as specified and as directed. |
| 79 | Taking down existing lining/finishes where provided and supply and fixing hollow PVC lining consisting of 5 mm thick plain coloured PVC sheet, fixed over PVC framework/sections as required, including necessary cutting, shaping, fitting, and joining. The work shall include fixing of PVC sheets using approved solvent cement/adhesive, proper alignment, finishing of joints, and making the surface smooth and uniform. The rate also includes all fixing accessories, wastage, labour, tools & tackles, and complete installation at site, all as specified and directed by Engineer-in-Charge. |
| 80 | Supply and fixing Gl frame work (snap grid framed work) for ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete including hangers 6 mm dia. GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long at any height and position including 6-7mm thick Gypsum board with both side PVC laminated sheet, suitable for roof ceiling snap grid framed work, shape, colour and design as approved by GEcomplete all as specified and as directed. |
| 81 | Taking down aluminium/wooden door or window shutters of area not exceeding 1.00 sqm each, carefully dismantling and carrying out necessary repairs to make them functional and smooth, including repair/replacement of defective components such as rubber gasket, snap beading, pivot, screws, hinges, and other fittings, tightening loose joints, realignment of shutter, and refixing the same shutter in original or other opening after repair, including testing for smooth operation (opening/closing/locking where applicable) and complete finishing all as specified and directed by Engineer-in-Charge. |
| 82 | Taking down aluminium/wooden door or window shutters of area exceeding 1.00 sqm but not exceeding 2.00 sqm each, carefully dismantling and carrying out necessary repairs to restore smooth and functional operation, including repair/replacement of defective parts such as rubber gasket, snap beading, pivots, screws, hinges and other fittings, tightening of joints, realignment of shutter, and making good all defects. After repair, refixing the same shutter in original or any other opening as directed, including testing for smooth operation and complete finishing all as specified and directed by Engineer-in-Charge. |
| 83 | Providing, supplying and fixing rotational moulded polyethylene water storage tank of white colour, 500 litres capacity (cylindrical vertical type, triple-layered with closed top), including hoisting and fixing in position, making inlet, outlet and overflow pipe connections, providing and fixing ball valve and gate valve, necessary fittings, accessories and supports. The item shall also include dismantling and removal of the existing old water tank, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 84 | Providing, supplying and fixing rotational moulded polyethylene water storage tank of white colour, 1000 litres capacity (cylindrical vertical type, triple-layered with closed top), including hoisting and fixing in position, making inlet, outlet and overflow pipe connections, providing and fixing ball valve and gate valve, necessary fittings, accessories and supports. The item shall also include dismantling and removal of the existing old water tank, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 85 | Supply & fixing in replacement of vitreous china wash down water closet pan (pedestal pattern, EWC) P Trap white clour , including connection to drain etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge. |
| 86 | Supply and fixing in repairs syphonic action type PVC low level flushing cistern of 10 litres capacity, complete with internal fittings, including 32 mm dia flush pipe, and fixing to supply line with PVC connection pipe 600 mm long, 15 mm bore, provided with brass ferrule/heads and rubber washers, including dismantling of old fittings if required, making proper connections, leak-proof joints, supports/clamps where necessary, testing for proper flushing operation, and complete installation all as specified and directed by Engineer-in-Charge. |
| 87 | Supply and fixing in repair 20 mm bore ball valve, high pressure type, made of PTMT (Polytetra Methylene Terephthalate) with epoxy coated aluminium operating rod and high-density plastic ball, suitable for fixing to iron/GI pipes with screwed ends. The work includes dismantling of existing defective valve if required, providing and fixing new valve with proper sealing materials (PTFE tape/hemp and white lead or equivalent approved), ensuring leak-proof joints, smooth operation of handle, alignment, and testing for proper functioning under pressure, complete all as specified and directed by Engineer-in-Charge. |
| 88 | Supply and fixing in repairs vitreous china wash hand basin white, flat back, size 550 x 400 mm including cutting for and pinning in ends of brackets or fixing on stand, 32 mm dia PTMT waste coupling (half or full threaded) (minimum weight 45 gms for 32 mm), and 32 mm PVC flexible waste pipe 800 mm long, complete including dismantling of existing basin if required, fixing and making good disturbed portion, complete all as specified and directed by the Engineer-in-Charge. |
| 89 | Supply and fixing in repair 32 mm bore PVC waste pipe for wash hand basin (WHB) / urinal, including dismantling of existing damaged pipe if required, providing new PVC waste pipe of approved quality and length, cutting, jointing with proper solvent cement joints and fittings such as bends, tees, couplers, reducers where required. The work also includes fixing to walls with suitable clamps/brackets, proper alignment and slope for smooth discharge, making good disturbed surfaces, leak-proof testing, and complete installation all as specified and directed by Engineer-in-Charge. |
| 90 | Supply and fixing in replacement vitreous china urinal, half stall type, white, size 410 x 380 x 950 mm, with grating and union for discharge pipe (excluding flushing cistern and flush pipe), including CP urinal spreader, CP connection and waste pipe, dismantling of existing urinal if required, and making good disturbed portion, complete all as specified and directed by the Engineer-in-Charge. |
| 91 | Material and labour for Preparation of existing treated surfaces by remove / scraping down all loose treatment etc with using broom / paint brush / sand papering or by any other mean including applying wall putty where required for filling to nail holes/light hair cracks etc., after preparing the surface applying 01 coat of exterior acrylic emulsion paint of approved tint/shade as per existing (Company Depot Tinted) @ 11.50 sq.m/litre/per coat to external walls / Soffits of Chajjas / Roof Projections / Cantilevers / Balcony etc. over and including a coat of exterior primer @ 15 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using airless spray gun complete all as specified and as directed.Brand and Make of exterior acrylic emulsion paint: - Weather Coat Glow of Berger / Apex Weatherproof of Asian / Excel of Nerolac Brand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac |
| 92 | Material and labour for preparation of new plastered surfaces, surface after complete removal, applying acrylic putty on internal surfaces of walls/ceiling/soffits etc (thickness vary from 1.5 to 2 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using readymade putty, including sanding with wall sander after filling the putty in first coat/second coat to make surface smooth and ready for receiving interior painting complete all as specified and as directed.Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.Make of acrylic Putty: - Berger / Asian / Nerolac |
| 93 | Material and labour for applying 02 coats of interior acrylic emulsion paint of white shade (Company Depot Tinted) @ 7.50 sa.m/itre/2 coats to ceiling surfaces (new or old prepared internal surface after complete removal and applying putty) over and including a coat of interior primer @ 10.50 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and| primer applying by using paint roller brush complete all as specified and as directed.Note;- Complete removal and putty shall be measured and paid separately under respective item of BOQ.Brand and Make of interior acrylic emulsion paint: - Bison Acrylic Emulsion of Berger / Tractor Emulsion of Asian / Beaty Smooth of NerolacBrand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac |
| 94 | Material and labour for applying 02 coats of interior acrylic emulsion paint of approved tint/shade (Company Depot Tinted) @ 12 sq.m/litre/2 coats to wall surfaces (new or old prepared internal surface after complete removal and applying putty) over and including a coat of interior primer @ 11 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using paint roller brush complete all as specified and as directed.Note ;- Complete removal and putty shall be measured and paid separately under respective item of BOQ.Brand and Make of interior acrylic emulsion paint: - Easy Clean Matt of Berger / Apcolite Advanced of Asian / Impression Ultra Fresh of NerolacBrand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac |
| 95 | Demolition of cement concrete (unreinforced) of any description and in any position, not otherwise specifically provided for, including breaking up concrete by manual or mechanical means, removing debris/rubbish from site, loading, transporting, and disposal of demolished material to a low-lying/approved dumping area up to 500 m distance from site, as directed by AGE/JE. The work includes cleaning the site after demolition, stacking if required for measurement, and making the area safe and clear, complete all as specified and directed by Engineer-in-Charge. |
| 96 | Material and labour for Waterproofing treatment to sunken floor using acrylic based multipurpose polymer. The treatment shall be carried out as per manufactures specification. The treatment shall be include of the following elements also: (i) Surface preparation of substrate by removing all traces of contaminates, loose and friable particles, cement laitance oils and grease, water repellent coatings etc(ii) Injection grouting using cementitious grout if required. The payment for injection grouting shall be made separately etc(iii) Repair to the substrate, filling of blow holes/voids and surface leveling using appropriate products specified by the manufacture.(iv) All intersections of horizontal and vertical surface should be profiled with a mortar fillet of minimum 25mm x 25mm.(v). The moisture content of the substrate shall be checked before application of first coat at water proof coating at the rate of 200 g/m2 followed brush topping at 450g/m2 per mm. The second coat shall be reinforced with glass fabric between the first and second coat.(vi). The treatment shall be protected by application of polymer modified cement mortar of thickness 10mm applied at the rate of 50g per mm.(vii). Tech specification : Tensile adhesion strength 0.5N/Sqmm (as bonding slurry). |
| 97 | Material & Labour for PCC (1:5:10) type E2 using 40mm graded AAC sludge/bats as filling of sunken floors complete all as specified and as directed. |
| 98 | Material and labour for 25 mm thick plain cement concrete (PCC) 1:2:4, Type B-0, using 12.5 mm graded stone aggregate, laid in floors as topping/levelling course over prepared surface. The work shall include surface preparation, mixing, laying, compaction, levelling, finishing smooth surface with steel trowel or as directed, curing, and all necessary operations including tools, labour, and wastage, complete all as specified and directed by Engineer-in-Charge. |
| 99 | Supply and fixing in repair 75 mm dia long neck PVC SWR floor trap (Type B) with SS/PVC grating of approved pattern, including dismantling of existing defective trap if required, and jointing to existing waste/soil pipe with proper sealing to ensure leak-proof connection. The item includes embedding/fixing the trap in cement concrete 1:2:4, Type B1 using 20 mm graded stone aggregate, proper alignment, slope adjustment, finishing of surrounding area, and making good the floor surface. Work shall include all cutting, jointing, necessary fittings, consumables, testing for leakage, and complete installation all as specified and directed by Engineer-in-Charge. |
| 100 | Supply and fixing of 50 mm bore PVC (SWR) pipe Type–B, single socketed, as overflow pipe for water storage tanks in any required length, including cutting, jointing with rubber ring (elastomeric) joints, bends/adaptors where required, and fixing to walls with suitable clamps/brackets. The work also includes laying in slabs/trenches, making proper slope/route as directed, sealing joints, supporting at regular intervals, and making good disturbed surfaces. Complete installation shall be leak-proof and functional, all as specified and directed by Engineer-in-Charge. |
| 101 | Taking down carefully/aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc and making good distrubed surfaces of wall and floors etc to match with the existing, complete all as specified and directed by Engineer-in-charge. |
| 102 | Providing material and labour for point wiring complete with modular type accessories using 1.5 sq.mm nominal cross-sectional area FRLSH PVC insulated, unsheathed, multi-strand copper conductor cable, 1100 V grade (ISI marked), drawn through concealed/surface PVC rigid conduit of 20 mm dia heavy duty type, including all conduit fittings and accessories such as bends, hooks, elbows, junction boxes and pressed steel powder-coated sunken boxes of 1.22 mm thickness and depth not less than 60mm suitable for mounting modular switches, sockets and fan regulators, for light/fan points controlled by one switch. The item shall include cover plate with frame fixed with brass screws and cup washers, provision of 1.5 sq.mm FRLSH PVC insulated multi-strand copper conductor earth wire connected to earth dolly, suitable modular plates, cover plates and all accessories. The work shall also include cutting chases in walls and making good the disturbed surfaces of walls, ceilings and floors with cement mortar (1:3) to match the existing surface, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 103 | Providing material and labour as per Item No. 77 hereinbefore, but including provision of 5 pin 5 Amp socket outlet on the same board, wired with 1.5 sq.mm FRLSH PVC insulated multi-strand copper conductor cable, including 1.5 sq.mm single core multi-strand FRLSH copper earth wire connected to common earth, with all necessary accessories and connections, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 104 | Providing material and labour as per Item No. 77 hereinbefore, but including provision of 5 pin 5 Amp socket outlet on an independent board, wired with 1.5 sq.mm FRLSH PVC insulated multi-strand copper conductor cable, including 1.5 sq.mm single core multi-strand FRLSH copper earth wire connected to common earth, with all necessary accessories, fittings and connections, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 105 | Providing material and labour as per Item No. 77 hereinbefore, but including provision of 6 pin 5/15 Amp multi-purpose 2-in-1 socket outlet on an independent board, wired with 2.5 sq.mm FRLSH PVC insulated multi-strand copper conductor cable, including 2.5 sq.mm single core multi-strand FRLSH copper earth wire connected to common earth, with all necessary accessories, fittings and connections, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 106 | Providing material and labour as per Serial Item No. 77 hereinbefore, but including provision of one bell/buzzer point controlled by one push button switch, wired with 1.5 sq.mm FRLSH PVC insulated multi-strand copper conductor cable, including all necessary accessories, fittings, connections and testing, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 107 | Providing material and labour for supply and fixing of modular switch, 6 Amps, one module, 250 volts, one-way type, including necessary mounting arrangement, accessories and connections, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 108 | Providing material and labour for supply and fixing of modular socket outlet, multipurpose type, 3/5 pin, 6 Amps, two module, 250 volts, including necessary mounting arrangement, accessories and connections, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 109 | Providing material and labour for supply and fixing of modular switch, one-way type, one module, 16 Amps, 250 volts, including necessary mounting arrangement, accessories and connections, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 110 | Providing material and labour for supply and fixing of modular socket outlet, multipurpose 2-in-1 type, 6 pin, 6/16 Amps, two module, 250 volts, including necessary mounting arrangement, accessories and connections, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 111 | Providing material and labour for supply and fixing of modular bell push, 6 Amps, one-way type, two module, 250 volts, including necessary mounting arrangement, accessories and connections, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 112 | Providing material and labour for supply and fixing of electric calling bell, Ding Dong type, single pole, AC 230 volts, including necessary mounting arrangement, accessories, connections and testing, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 113 | Providing material and labour for supply and fixing of PVC/Polycarbonate type lamp holder with back plate suitable for batten fittings, rated 250 volts, including taking down of existing old/unserviceable lamp holder complete, removal of debris, and making good the surface wherever required, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 114 | Providing material and labour for supply and fixing of surface type polycarbonate ceiling rose with isolated body, two to three terminal, Topline series, size 20 x 50 mm, 6 Amps, 250 volts, including dismantling and taking down of old unserviceable ceiling rose, removal of debris and fixing of new ceiling rose with all necessary accessories, connections and testing, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 115 | Providing material and labour for supply and fixing of concealed type single pole and neutral sheet metal enclosure (AC box) in wall, complete with two pin and earth plug and socket (metal clad), including provision of one number single pole MCB of 20 Amps capacity, 240 volts AC supply, with all necessary fittings, connections and accessories. The work shall also include dismantling and taking down of old unserviceable enclosure, removal of debris and making good the disturbed surface, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 116 | Providing material and labour for supply and fixing of LED light fitting, mirror type with high output diffuser, 2 feet length, 10 watts, luminous efficacy 100 lumens/watt, 220 volts AC, decorative type, complete with suitable driver, holder and LED lamp, having IP-20 protection, including making connections with suitable size three core flexible copper conductor cable. Item shall also include taking down of old unserviceable light fitting and removal of debris, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 117 | Providing material and labour for supply and fixing of LED light fitting, 1 x 20 watts, luminous efficacy 120 lumens/watt, 220 volts AC, decorative box type, complete with suitable driver, holder and LED tube light, having IP-20 protection, including making connection with suitable size three core flexible copper conductor cable from ceiling rose. The item shall also include taking down of old unserviceable light fitting, removal and disposal as directed, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 118 | Providing material and labour for supply and fixing of LED luminaire of size 600 mm x 600 mm, 36 watts, luminous efficacy 100 lumens/watt, 220 volts AC, recess mounted type, complete with high efficiency PMMA diffuser for soft glare-free illumination, suitable driver, holders and LED lamps, suitable for fixing in roof ceiling. The item shall include making electrical connections with driver using suitable size three core flexible copper conductor cable, including all accessories, materials, labour, tools and plants, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 119 | Providing material and labour for supply and fixing of sheet metal enclosure fabricated from CRCA mild steel sheet, IP-54 protection, flush mounted with metal door, powder coated distribution board (DB) SPN 12-way, 230 V AC, with 200 Amps rated bus bar, double door, 12 modules, dust and vermin proof, suitable for incorporation of MCBs, isolators and other accessories. The work shall include dismantling and taking down of old unserviceable MCB DBs, removal of debris and making good the disturbed surfaces, including all necessary fittings, connections and accessories, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 120 | Providing material and labour for supply and fixing of sheet metal enclosure fabricated from CRCA mild steel sheet, IP-54 protection, flush mounted with metal door, powder coated distribution board (DB) SPN 8-way, 230 V AC, with 200 Amps rated bus bar, double door, 8 modules, dust and vermin proof, suitable for incorporation of MCBs, isolators and other accessories. The work shall include dismantling and taking down of old unserviceable MCB DBs, removal of debris and making good the disturbed surfaces, including all necessary fittings, connections and accessories, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 121 | Providing material and labour for supply and fixing of single pole miniature circuit breaker (MCB SP), suitable for 230 volts AC supply, 5 to 32 Amps rating, having rupturing capacity not less than 10 kA, 'C' curve characteristic, ISI marked, one module type, including dismantling and taking down of old unserviceable MCB SP, removal of debris and making good the disturbed surface, including necessary mounting arrangements, connections, testing and commissioning with all accessories, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 122 | Providing material and labour for supply and fixing of miniature circuit breaker (MCB), single pole, 240 volts, 10 kA breaking capacity, 'B' curve characteristic, 40 Amps current carrying capacity, suitable for installation in MCB distribution board, including mounting, connections, testing and commissioning with all necessary accessories, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 123 | Providing material and labour for supply and fixing of ceiling fan complete with blades, down rods, electronic regulator and all necessary accessories, suitable for 230 volts AC supply, 1200 mm sweep, having minimum air delivery of 210 CFM, service value 6.00 as per BEE rating, five star rated, with brushless direct current motor (BLDC) technology, including all fittings, connections, testing and commissioning, complete in all respects, as specified and directed by the Engineer-in-Charge. |
| 124 | Providing material and labour for supply and fixing of electric water heater, storage type, steel body with copper inner tank and heating element of capacity up to 2 KW, 25 litre storage capacity, BEE 5 Star rated, complete with all necessary accessories including safety valve, thermostat, non-return valve (NRV), connection pieces, fittings, electrical and plumbing connections, testing and commissioning, complete in all respects, as specified and directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 125 | Providing material and labour for supply and fixing of electric water heater, storage type, steel body with copper inner tank and heating element of capacity up to 2 KW, 25 litre storage capacity, BEE 5 Star rated, complete with all necessary accessories including safety valve, thermostat, non-return valve (NRV), connection pieces, fittings, electrical and plumbing connections, testing and commissioning, complete in all respects, as specified and directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender