Tender For Addition / Alteration To Windows & Floors Of Type Iv Married Quarters E-1 To E-8 (32 Qtrs) At Ganeshkhind Drdo Estate Under Ge(I) R&D Pashan, Pune
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Sep 2026
18 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition / Alteration To Windows & Floors Of Type Iv Married Quarters E-1 To E-8 (32 Qtrs) At Ganeshkhind Drdo Estate Under Ge(I) R&D Pashan, Pune
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tilling 10mm to 25mm thick including cement mortar bedding ( but not backing), removing serviveable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Material and labour for Cement concrete 1:2:4 in pavements/sub base of floor laid to required slope and camber in panels as required including consolidation finishing and tamping complete all as specified and directed. |
| 3 | Providing and laying double charged Vitrified tiles of size 600mm x 600mm in floor with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily complete all as specified and directed. |
| 4 | Providing and laying double charged Vitrified tiles with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc complete all as specified and directed. |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead completeall as specified and directed. |
| 6 | Material and labour for 12mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces of wall complete all as specified and directed. |
| 7 | Providing and applying distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two coats) over and including water thinnable priming coat with cement primer complete all as specified and directed. |
| 8 | Dismantling doors, windows and clerestory window of area 3 sq. metres and below (steel or wood) shutters including chowkhats, architrave, hold fast etc and making good as existing complete and stacking within 50 metres lead all as specified and directed. |
| 9 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 10 | Providing and fixing aluminium frame work for windows (three track), ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be Powder coated (minimum thickness of powder coating 50 micron) smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately). |
| 11 | Provinding and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) shutters of windows including providing and fixing pivots/locking arrangement and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required complete all as specified and directed. |
| 12 | Providing and fixing glazing with tinted/frosted glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. |
| 13 | Providing and fixing stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50mm dia wire for fixing of window, ventilator etc. complete all as specified and directed. |
| 14 | Supply and Fix aluminium louvered ventilators of section size 100mmx25mmx1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. including taking down existing steel ventilator complete all as specified and as directed by Engr - in - Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender