Tender For Special Repair To Building Number P-38 Of 15 Bihar At Pal Ur Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Sep 2026
20 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Building Number P-38 Of 15 Bihar At Pal Ur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation for removal of existing treatment, all loose gravel cement mortar, dirt, oil, grease and foreign material by jet of dry air, roughening and cleaning the surface mechanically or by grinding to make it smooth before application. Loose existing bituminous material manually and with heat torch gun to get smooth plain finished surface with no loose material on surface. Repair all joints & cracks and apply primer with SmartCare Epoxy Primer to seal the pores/cracks and enhance the adhesion of the coating. Apply first coat Fiber reinforced elastomeric liquid waterproofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflective Index (SRI) of 100-110, having minimum elongation of 350%, tensile strength of 2.9 MPa and shall have cracks bridging ability up to 2.5 mm and shall resist 10 bars of hydrostatic pressure, reduce surface temperature up to 10 degree Celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3 mm thickness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50 mm and allow it to dry. Apply second undiluted coat @ 0.451 ltr/sqm. Apply third and final coat undiluted @ 0.451 ltr/sqm as specified and as per manufacturer's specification having warranty for 10 years. |
| 2 | M&L 15 mm thick plastering in cement mortar 1:3 on brick surfaces or concrete surface as on Roof surface to maintain slope, finished even and smooth without using extra cement incuding mixing of wpc complete all as specified and directed. (Note - Integral Water proofing compound shall be measured & paid separately.) |
| 3 | Supply only liquid water proofing compound complete all as specified as directed. |
| 4 | M&L for 25mm x 20mm Drip Course Extra over rendering or plastering and similar work including cutting to edges, all mitres and stopped ends in CM 1:4 including mixing with wpc including taking down cement plaster for making Drip course complete all as specified as directed. |
| 5 | M&L 15 mm thick plastering in cement mortar 1:4 on brick surfaces or concrete surface, as on external surfaces in two layers, surface finished even and smooth without using extra cement incuding mixing of wpc including taking down cement plaster of any description and any thickness including mangalore pattern tiles on brick/stone/concrete surfaces complete all as specified and directed. (Note - Integral Water proofing compound shall be measured & paid separately.) |
| 6 | M & L rendering 10 mm thick in CM 1:6 on fair face of brick work or concrete surface of brick masonry, finished even and smooth without using extra cement including taking down cement plaster of any description and any thickness including gritt finish as directed by GE. |
| 7 | M&L for preparation of new plastered surfaces of wall and applying two coats of Distemper Oil Emulsion over 2 mm thick wall care putty to prepare the surface even and smooth complete all as specified as directed. |
| 8 | M&L for preparation of Old plastered surfaces of wall by Complete removal of existing treatment and applying two coats of Distemper Oil Emulsion over 2 mm thick wall care putty to prepare the surface even and smooth complete all as specified as directed. |
| 9 | M&L for preparation of old plastered surfaces of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489.2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over two coat of wall putty complete all as specified as directed. |
| 10 | M & L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including demolition of existing tiles and removal outside the MoD land complete all as specified and as directed and approved by GE. (Make & Pattern- ISI Marked as approved by GE) |
| 11 | M&L for 75 mm thick Cement concrete in sub base type D2 1:4:8 (40mm graded stone aggregates) complete all as specified as directed. |
| 12 | M&L for 75 mm thick PCC 1:3:6, type C-2 (Using 20 mm graded crushed stone aggregate) as in plinth protection etc and finished even without using extra cement, complete all as specified as directed. |
| 13 | M&L for cement concrete type B-1 1:2:4 (20mm graded aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings etc, complete all as specified as directed. |
| 14 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified as directed. |
| 15 | M & L Granite of any type tiles 15 to 20mm thick laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) machine cut, bedded and jointed with grey cement slurry and pointed with cement with admixture of pigment to match the shade of granite stone including grinding and polishing & Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc Laid, bedded complete all as specified as directed. |
| 16 | M & L Machine cut kota stone slab flooring 18-20 mm thick over laid over and including 15mm thick screed bedding layer in cement mortar 1.6 (1 cement : 6 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl Demolition complete all as specified as directed. |
| 17 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius, built in CM (1:6) any description of roof including demolition of brick work or stone boulder masonry built in cement or cement mortar complete all as specified as directed. |
| 18 | M&L for Vitrified Ceramic tiles 10 mm thick Light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) including dismantling complete all as specified as directed. |
| 19 | M & L for Wall Glazed tiles coloured of size 1200X600X9mm thick as approved in vertical surfaces such as jointed in neat cement slurry and pointed with white/grey cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand) or fixing with epoxy grout & fixing chemical if required including dismantling complete all as specified as directed. (Colour, size and pattern to be apprved by GE) |
| 20 | M & L Non - skid Ceramic tiles Coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand)complete all as specified as directed.Colour, size and pattern to be apprved by GE |
| 21 | M&L for 25 mm thick PCC 1:2:4, type B-1 (Using 20 mm graded crushed stone aggregate) and finished even as in floor in subbase, complete all as specified as directed. |
| 22 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified as directed. |
| 23 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete all as specified as directed. |
| 24 | S&F in Powder coated anodised aluminium frame/chowkhat for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified as directed. |
| 25 | S&F Powder coated Anodised aluminium door shutters ( powder coating of any colour and thickness not less than 50 micron) aluminium section weighting 0.55kg/m incliding necessary joining cleats, glazing clips, rubber neoprene packing two number of alumium handle 150mm long for each shutter, one aluminium door stopper, hinges type B-21,100mm long,anodised aluminium snap beading,screws,anodised aluminium fittings complete all as specified as directed. |
| 26 | S&F Powder coated Anodised aluminium window and ventilator shutters ( powder coating of any colour and thickness not less than 50 micron) side hung type without sash bars, aluminium section weighting 0.55kg/m incliding necessary joining cleats, glazing clips, rubber neoprene packing one number of aluminium handle of suitable size for each shutter, one peg stays 150mm long, 02 numbers hinges type B-21,100mm long,anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified as directed. |
| 27 | S&F 5.50mm thick sheet glass ordinary quality, exceeding 0.50 square metre in each pane fixed with rubber gasket and aluminium powder coated snap beading etc including hacking out old broken glass from wood or steel frame or frames of any description complete all as specified as directed. |
| 28 | S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane including hacking out old broken glass from wood or steel frame or frames of any description complete all as specified as directed. |
| 29 | S & F Door closer hydraulically regulated, Aluminium (extruded section) body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 30 | S&F Galvanised mild steel wire cloth 0.56mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 31 | S&F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer,complete all as specified and directed. |
| 32 | M&Lfor providing cement concrete (1:2:4) type B0 using 12.50mm graded aggregate for filling of door frame etc and other similar work complete all as specified as directed. |
| 33 | S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat rusk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800N (face) & 900N (Edge) minimum compressive strength 50n/mm2 modulus of elasticity 850n/mm2 and resistance to spread of flame of class A category with property of bening termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with lot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screw, complete all as specified as directed. |
| 34 | S & F Powder coated aluminium (minimum thickness of powder coating 50 microns) partitions with slider frame of two/three numbers, allowing parallel tracks within the sliding frame with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make confirming to IS : 733 and IS:1285, fixing with dash fasteners of required dia and size to recieve glass of any description, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium section shall smooth , rust free, straight, mitred and jointed mechanically wherever required including cleats angle. Aluminium snap beading for glazing/paneling, CP brass/ stainless steels , screws. , complete all as specified as directed.(Note:- Glass to be fixed in sliding panel paid separately) |
| 35 | S&F 12mm thick toughed glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required. complete all as specified as directed. |
| 36 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified as directed. |
| 37 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed by GE. |
| 38 | S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified as directed. |
| 39 | S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified as directed. |
| 40 | S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified as directed. |
| 41 | S&F 300 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple .(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified as directed. |
| 42 | S&F in repairs 18mm thick High density high moisture resistant(HDHMR) laminated board for cupboard/ kitchen cabinets of approved colour & design conforming IS:12406, made from agro fibre with density not less than 800kg/cum including cutting to size, edge finishing incl PVC tape not less than 1mm thick on exposed edges of board, fixing with screws/adhesive fixed over framework of seasoned wooden battens or GI framework of suitable section as required and providing backing support and including hydraulic/ telescopic/ piono hinges, SS handles for shutters as required complete all as specified as directed. |
| 43 | S&F Auto closing hinges 35 mm of 0 degree crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified as directed. |
| 44 | S&F Stainless steel handles 100 mm size for kitchen cabinet shutters complete all as specified as directed. |
| 45 | S&F Chromium plated stainless steel wire basket (storage basket) pull out type for large utensils size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc complete all as specified as directed. |
| 46 | S&F Chromium plated stainless steel wire basket (cup and saucer basket) pull out type for large utensils size 380 x 500 x 100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified as directed. |
| 47 | S&F Chromium plated stainless steel wire basket (Plate basket) pull out type for large utensils size 380 x 500 x 100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified as directed. |
| 48 | S&F Chromium plated stainless steel wire basket (Cutlery basket) pull out type for large utensils size 380 x 500 x 100 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified as directed. |
| 49 | S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated up to 900 to 1000mm door opening complete all as specified as directed. |
| 50 | S&F in repairs 1700mm x 900mm/ 1200mm x 600mm/ 900x600 bevelled edge mirror of selected & approved size and selected quality glass mounted on 6mm thick AC building board or commercial plywood decorative type with frame or frameless body and fixed to according plugs with chromium plated brass screws and cup washers complete all as specified. size to be approved by GE |
| 51 | S&F in repair vitreous china wash down water closet pan (Pedestal pattern) one piece with flushing cistern white with 'P/S' trap connected to drain or out going pipe and flushing pipe complete including PVC sheet cover closed recesed type with flat bottom , and cover with mild steel chroimum plated or aluminium hinging device complete all as specified as directed. |
| 52 | S&F as in repair CP jet spray hygenic spray jet for 15mm bore dia fittings 1 to 1.5m long tube acrylic type complete all as specified and directed |
| 53 | S&F fixed in repairs for Vitreous china wash basin,white oval type Counter top as required & approved size 550 x 420mm excluding taps,chain and plug and pocelain stopper but incl brackets, cutting, embedding and pinning in ends of brackets or erecting stand, including waste pipe or bottle trap & fittings as approved complete all as specified as directed. |
| 54 | S&F in repair for Vitreous china wash Hand basin, white, flat back, size 550 X 400mm with Pedestal excluding taps, waste, chain and plug and porcelain stopper but incl brackets, cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete fixed in repairs.complete all as specified as directed. |
| 55 | S&F in repairs Vitreous china urinal Half stall type white of size 400x590 with intergrated CP spreader including bottle trap & fittings complete all as specified as directed. |
| 56 | S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified as directed. |
| 57 | S&F in repair CP Swan Neck type Pillar taps fancy type 15 mm bore cast alloy with capasten head screwed down high pressure with without lettered 'Hot' or Cold with long screwed shanks and fly-nutsscrewed complete all as specified as directed. |
| 58 | S&F in repair Steel water tubing, 15mm bore dia, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc, complete all as specified and directed. |
| 59 | S&F in repair Steel water tubing, 20mm bore dia, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc, complete all as specified and directed. |
| 60 | S&F in repair Chromium plated toilet paper holder premium quality complete all as specified as directed. |
| 61 | S&F in repair soap dish any type fixed to plugs with chromium plated brass screws premium quality complete all as specified as directed. |
| 62 | S&F in repair 15mm bore Angle valves, CP fancy type (ISI marked) two way screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) complete all as specified and directed. |
| 63 | S&F in repair 15mm bore wall-mounted heavy-duty brass mixer with separate hot and cold water inlets, single/dual control mechanism, common water outlet, and provision for shower connection, Complete with suitable diverter, shower outlet, wall flanges, handles, washers, and all necessary accessories for installation, Suitable for concealed/ exposed hot and cold-water plumbing systems complete all as specified as directed. |
| 64 | S&F in repair bib taps 15mm bore, fancy type cromium plated with butterfly handle, screwed down, high pressure, with carutch or butterfly handle, screwed both ends for iron pipe or for unions.including wall flange complete all as specified and directed. |
| 65 | S&F in repair Brass chromium plated mixture for mixing hot and cold water for Bath/WHB/sink, screwed down for iron pipe for 15mm dia bore pipe, complete all as specified as directed. |
| 66 | S&F in repair brass chromium plated shower rose 125 mm/200mm/250mm size fancy type premium quality round or square shaped with long body with swivel joints including fixing to steel pipe or union complete all as specified and directed. Size to be approved by GE |
| 67 | S&F in repairs sheet glass shelf assembly consisting of 50mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 68 | S&F in repair brass chromium finished SS material tubular towel rail, 600mm long dual towel shelf complete all as specified and directed. |
| 69 | S&F kitchen sink double bowl made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing brackets as required and connecting union to & size of each bowl 410 x 330x 160mm complete all as specified as directed. |
| 70 | S&F kitchen rack of stainless steel 1520mmx610x865mm with minimum 3 tier workbench with 2overhead shelves steel complete all as specified as directed. |
| 71 | S&F in repair PVC connections 15mm, 450mm long with PTMT nuts washers etc complete all as specified and directed. |
| 72 | Dismantling of CI/PVC pipe 75/100mm bore fixed to wall or laid in floor or trenches inculding connection all as specified and directed. |
| 73 | S&F PVC (SWR) pipes 75 mm bore dia, single socketed, in any length with rubber ring joints fixed to walls etc, complete all as specified and directed. |
| 74 | S&F PVC (SWR) pipes 75 mm bore dia, single socketed, in any length with rubber ring joints laid in trenches or in floors etc, complete all as specified and directed. |
| 75 | S&F PVC (SWR) pipes 110 mm bore dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 76 | S&F PVC (SWR) pipes 110 mm bore dia, single socketed in any length with rubber ring joints fixed to laid in trenches or in floors etc, complete all as specified and directed. |
| 77 | S & F 75 mm bore PVC Bends (SWR) |
| 78 | S & F 75 mm bore PVC (SWR) T- Junction with oval access door |
| 79 | S & F 110 mm bore PVC Bends (SWR) |
| 80 | S & F 110 mm bore PVC (SWR) single, (Single T) Junction with ovel acces door |
| 81 | S&F CP grating 100mm dia (Minimum weight 25gms).complete all as specified as directed. |
| 82 | S & F of PVC (SWR) multi floor trap of 75mm dia with CP grating including jointing with solvent cement as directed by GE. |
| 83 | S&F PVC (SWR) vent cowl 110 mm dia |
| 84 | M & L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed |
| 85 | M&L for preparation of steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified as directed. |
| 86 | S&F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position incl . tank nipple, with washer incl dismantling complete all as specified as directed. |
| 87 | S&F 20mm dia gun metal ,globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 88 | S&F in repairs 25mm drapery rod Stainless Steel fancy/ designer pattern incl brackets Complete all as specified and as directed. (Pattern/ Design of Brackets to be approved by GE) |
| 89 | S&F in repair for Hollow PVC Wall panelling super heavy quality minimum 5m thick, printed PVC sheet used instead of plain colour sheet inclusive of required adhesive & screws/nails,cutting, finishing edge trims as required, fixed vertically or horizontally at site, complete all as specified and directed by Engineer in Charge.(Pattern/ shade to be approved by GE) |
| 90 | M&L for Anodised aluminium snap grid frame work for false ceiling all as specified complete all as specified as directed. |
| 91 | M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in Ceilings incl dismantling complete all as specified as directed. |
| 92 | S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (Gde-E- 250) quality-A etc including Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 93 | S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, etc Fe-410-W (Gde-E-250) quality-B wrought iron or mild steel work of any description complete all as spfd and directed. |
| 94 | S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling complete all as specified as directed. |
| 95 | S&F for 3mm thick reinforced translucent Sheet side lap fixed complete with coach screw and washer in roof, wall etc complete all as specified. |
| 96 | M&L for 200mm thick Cement concrete in foundations, filling and mass concrete type D2 1:4:8 (40mm graded stone aggregates) complete all as specified as directed. |
| 97 | Writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high on walls complete all as specified and directed by GE incl obliterating old writing of any description with paint to match existing work. |
| 98 | Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 99 | Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed. |
| 100 | Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
| 101 | Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender