Tender For Repair And Maintenance Of Steel/Wooden Furniture And Misc Connected Items Of Hq 09 Sect Its repair renovation Units Under Age (I) Bhalra (Nit No. 67 Of 2026-27)
Tender Value
5.90 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
15 days left
EMD
11800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagrota → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Steel/Wooden Furniture And Misc Connected Items Of Hq 09 Sect Its repair renovation Units Under Age (I) Bhalra (Nit No. 67 Of 2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | ALMIRAH LARGE /MEDIUM & ALMIRAHA OF SIZE 1.8Mx1.2Mx0.4M STEEL WITH SHELVES |
| 2 | Replacement of old existing broken / unserviceable locks of any description and in any position with new locks, six lever with double keys , fixing with suitable nuts , complete all as specified and directed by Engineer-in-Charge, Make:Godrej/Harrison |
| 3 | Replacement of old existing broken / unserviceable door handles of Almirah and new door handle of size 100mm long, cast Iron chromium plated of approved make of Almirah shall be fixed with suitable nuts and pins, complete all as specified and directed by Engineer-in-Charge . |
| 4 | Replacement of old existing broken / unserviceable Legs of Almirah and new Legs made out of 1.0mm mild steel sheet including welding of legs where as required, complete all shown in drg and as directed by Engineer-in-Charge . |
| 5 | Taking out unserviceable steel clamp with new steel clamp made out of MS sheet 3.00mm thick of size 50mmx20mm including fixing of lose shelves, complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Replacement of old damaged/ unserviceable shelves of Almirah large with new shelf 1.0mm thick Mild Steel Sheet of size 0.765mx0.44m with suitable clamps as shown in drg to be painted with two coat of synthetic enamel paint (Olive green) over a coat of red oxide primer with spray gun stove enamel paint, finish to the required shade , complete all as shown in drg and as directed by Engineer-in-Charge |
| 7 | Replacement of old damaged/ UNSV shelves of Almirah Medium with new 1.0mm thick Mild Steel Sheet of size 0.765mx0.44m with suitable clamps as shown in drg and to be painted with 02 coats of synthetic enamel paint (Olive green) over a coat of red oxide primer with spray gun stove enamel paint, finish to the required shade , complete all as shown in drg and as directed by Engineer-in-Charge |
| 8 | Replacement of unserviceable locking device from Almirah large/Medium steel with new locking device, complete all as shown in drg and as directed by Engineer-in-Charge |
| 9 | CHAIR DINING |
| 10 | Replacement of U/S rear leg from chair dining with new rear leg of seasoned teak wood of size 0.89mx0.030mx0.055m matching with the existing shape and size, complete all as specified and directed by Engineer-in-Charge. |
| 11 | Replacement of U/S front leg from chair dining with new front leg of seasoned teak wood of size 0.46mx0.080m x 0.055m from chair dinning with new front leg of seasoned teak wood matching with the existing shape and size, complete all as specified and directed by Engineer-in-Charge. |
| 12 | Replacement of U/S front/back/side rail from chair dining with new front/back/side rail made out of well seasoned teak wood of size 0.430m x 0.030mx0.065m matching with the existing shape & Size, complete all as specified and directed by Engineer-in-Charge. |
| 13 | Replacement of U/S stiffeners from chair dining with new stiffeners made of size 0.44mx0.025mx0.20m made out of well seasoned teak wood matching with the existing shape & size, complete all as specified and directed by Engineer-in-Charge. |
| 14 | Taking out old damaged/decayed PVC seat frame from its positoin supply and fixing new PVC seat frame of size 360x360x05mm thick white colour complete all as specified and as shown on drg. |
| 15 | French polish of best quality to the chair dining with arms including preparation of surface complete all as specified and directed by Engineer-in-Charge. |
| 16 | STEEL SINGLE BUNK COMPLETE 1890x800x450MM WITH MATTRESS AND SHOE RACK |
| 17 | Replacement of unserviceable/demaged plywood top with from its position with new plywood top position with new plywood top 1890mmx800mmx12mm thick, BWR grade as shown in drawing, complete all as specified and directed by the Engineer-in-Charge Make : Kit ply/National Bhutan/Nova pan |
| 18 | M&L for replacement of unserviceable mattress with new matress of , 50mm thick x 1850 mm x 800 mm covered with high quality cloured rexzine shown in drawing, complete all as specified and directed by Engr -in-Charge Make :- Sleepwell/Kurlon |
| 19 | Materials and labour for welding to damaged/decayed frame of shoe rack steel fixed with different sleeping bunks complete all as directed by Engineer-in-Charge. |
| 20 | STEEL DOUBLE BUNK 1890X800X450MM WITH CUSHION AND SHOE RACK |
| 21 | Replacement of unserviceable/demaged plywood top with from its position with new plywood top position with new plywood top 1890x800x12mm thick, BWR grade as shown in drawing, complete all as specified and directed by the Engineer-in-Charge Make : Kit ply/National Bhutan/Nova pan |
| 22 | M&L for replacement of unserviceable mattress with new matress of , 50mm thick x 1890 mm x 450 mm covered with high quality cloured rexzine shown in drawing, complete all as specified and directed by Engr -in-Charge Make :- Sleepwell/Kurlon |
| 23 | CHARPOY GI DOUBLE BUNK Drg No FD-112, GE (I) 873/FD-01/2020) |
| 24 | Replacement of unserviceable/demaged plywood top with from its position with new plywood top 1850X945MMx12mm thick, BWR grade incuding 20mmx25mm teak wood beading shall be provided in all sides at bottom of the plywood and one stiffener of size 20x25mm shall be provided in middle at bottom as shown complete all as specified and directed by the by the Engineer-in-Charge Make : Kit ply/National Bhutan/Nova pan |
| 25 | STEEL SINGLE BUNK COMPLETE 1850X945MM M WITH CUSHION AND SHOE RACK |
| 26 | Replacement of unserviceable/demaged plywood top with from its position with new plywood top 1850X945MMx12mm thick, BWR grade as shown in drawing, complete all as specified and directed by the Engineer-in-Charge Make : Kit ply/National Bhutan/Nova pan |
| 27 | M&L for replacement of unserviceable mattress with new matress of , 50mm thick x 1850 mm x 945 mm covered with high quality cloured rexzine shown in drawing, complete all as specified and directed by Engr -in-Charge Make :- Sleepwell/Kurlon |
| 28 | Materials and labour for welding to damaged/decayed frame of shoe rack steel fixed with different sleeping bunks complete all as directed by Engineer-in-Charge. |
| 29 | LOCKER STEEL (770X600X950MM, 770X600X450MM & 800X1000X600MM |
| 30 | Replacement of old existing broken / unserviceable locks of any description and in any position with new locks, 80mm six lever with double keys , fixing with suitable nuts , complete all as specified and directed by Engineer-in-Charge, Make:Godrej/Harrison |
| 31 | Replacement of old existing broken / unserviceable door handles of locker steel and new door handle of size 100mm long, cast Iron chromium plated of approved make of locker shall be fixed with suitable nuts and pins, complete all as specified and directed by Engineer-in-Charge . |
| 32 | Replacement of old existing broken / unserviceable Legs of locker and new Legs made out of 1.0mm mild steel sheet including welding of legs where as required, complete all shown in drg and as directed by Engineer-in-Charge . |
| 33 | Replacement of unserviceable locking device from locker steel with new locking device, complete all as shown in drg and as directed by Engineer-in-Charge |
| 34 | LOOKING MIRROR OF SIZE 75x50CM WITH FRAME |
| 35 | Replacement of old existing broken/unserviceable looking mirror of size 75 X50cm with new looking mirror 75cmX50cmX5.5mm thick with wooden frame on back side of 6mm plywood complete all as specified and directed by the Engineer-in-Charge Make of Mirror : Sant Gobin/Modigaurd |
| 36 | STEEL LOCKER OF SIZE 830X480X1900MM (TP) MADE OF SHEET TWO DOOR WITH TWO HANDLES & TWO LOCKS |
| 37 | Replacement of old existing broken/Un-serviceable locks of any description and in any position with New locks, 6 lever with double keys, fixing with suitable nuts complete all as specified and directed by Engineer -in-Charge, Make:Godrej/Harrison |
| 38 | Replacement of old existing broken/Un-serviceable door handle of steel locker 100 mm long Cast Iron chromium plated of approved make, with nuts & pins, complete all as specified and directed by Engineer -in-Charge |
| 39 | Replacement of old existing broken / unserviceable Legs of steel locker and new Legs made out of 1.0mm mild steel sheet including welding of legs where as required, complete all shown in drg and as directed by Engineer-in-Charge . |
| 40 | Replacement of old existing broken/Un-serviceable looking mirror from its position with new mirror of 5mm thickness and size 700x280mm, complete all as specified and directed by Engineer -in-Charge, Make:Modiguard/Sant gobain |
| 41 | LOCKER BED SIDE |
| 42 | Replacement of old existing broken / unserviceable haps and stapples of any description and in any position with new haps and staples 75x4x3mm chromium plated , fixing with suitable secrews , complete all as specified and directed by Engineer-in-Charge, Make:Godrej/Harrison |
| 43 | Replacement of old existing broken / unserviceable door handles of locker bed side and new door handle of size 100mm long, cast Iron chromium plated of approved make of locker bed side shall be fixed with suitable nuts and pins, complete all as specified and directed by Engineer-in-Charge . |
| 44 | PAINTING OF STEEL FURNITURE : Painting of following steel furniture items by providing two coats of synthetic enameled paint of OG/Black/Silver/ Smoke Gray to match with existing shade with spray gun after properly smoothing the surface with sand paper and applying putty and primer including minor welding/denting etc where necessary all as directed by Engineer-in-charge. Make of Paint : Nerolac/Berger/Asian |
| 45 | Almiraha large (Steel) of size 1.8mX1.2m x0.4MM |
| 46 | Almiraha Med (steel) with Shelves |
| 47 | Steel locker of size 770X600X950MM, 770X800X450MM & 800X1000X600MM |
| 48 | Steel Locker of size 830x480x1900MM with two door and two handles |
| 49 | Locker Bed side steel |
| 50 | Office table steel 1.2X75x77MM With drawers, |
| 51 | Steel Double Bunk Complete 1890X800x450MM |
| 52 | Steel Sleeping bunk 1890X800x450mm, 1850X945 mm |
| 53 | STEEL RACK 1.2x1.8X0.4MM , 1.2X0.75X0.77MM & 1.2X1.8X54MM S |
| 54 | Supply and fixing of shelves made of 1mm thick PBI sheet made to shape as per drg and directed by Engr-in- charge. |
| 55 | Cleaning & preparing surface for Gas welding of the broken of any steel furniture. Welding shall be done in best trade practice and running welding upto 100 mm shall be treated one point all as specified and directed.by Engineer-in-charge. |
| 56 | Supply and fixing of nuts and bolts of shelves to fix with angle iron where required as per drg and directed by Engr-in- charge. |
| 57 | WOODEN CABINET TWO PART 0.75X0.6X0.90MM |
| 58 | Replacement of old existing broken / unserviceable locks of any description and in any position with new locks, four lever with double keys , fixing with suitable screws , complete all as specified and directed by Engineer-in-Charge, Make:Godrej/Harrison |
| 59 | Replacement of old existing broken / unserviceable door handles of wooden cabinet and new door handle of size 96mm long, cast Iron chromium plated of approved make of wooden cabinet shall be fixed with suitable screws, complete all as specified and directed by Engineer-in-Charge . |
| 60 | Replacement of old damaged/ unserviceable shelves of wooden cabinet with new door handle made of 18mm pre-laminated partcle board teak finish as shown in drg , complete all as shown in drg and as directed by Engineer-in-Charge Make :- Kit ply/ National/ Bhutan/ Nova pan. |
| 61 | Replacement of unserviceable door shutters from wooden cabinet with new door shutters made of pre-laminated particle board 18mm thick teak finish,, complete all as shown in drawing and as directed by Engineer-in-Charge. Make :- Kit ply/ National/ Bhutan/ Nova pan. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender