Tender For Repair Of Steel And Wooden Furniture At Mil Stn Dharchula Under Ge(Mes) Pithoragarh
Tender Value
23 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
3 days left
EMD
46000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pithoragarh → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Steel And Wooden Furniture At Mil Stn Dharchula Under Ge(Mes) Pithoragarh
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | REPAIR TO ALMIRAH MEDIUM STEEL : (FD- 67(M), 243,340 & 1032)(a) Removing of old unserviceable 3 way locking device complete of Almirah Med steel and replacement of new 3 way locking device made to shape as required and all as specified in drg and directed by Engr-in-charge. |
| 3 | (b) Removing of existing old lock of Almirah Med steel and replacement of new lock of 5 lever with duplicate keys and fixing in proper functional position as original shape all as specified and directed by Engr-in-charge. |
| 4 | (c) Removing of existing old unserviceable handle including necessary nut, bolts, washer etc of Almirah Med steel and replacement of new chromium plated handle including necessary nut, bolts, washer etc all as specified & directed by EIC. |
| 5 | (d) Removing of existing old unserviceable legs of Almirah Med Steel and replacement of new legs made out of 1 mm thick MS Sheet made to shape and providing two coat of Olive Green or Silver Gray paint over a coat of Red oxide primer, all as shown on drgs & directed by EIC. |
| 6 | (e) Removing of existing unserviceable shelves of Almirah med steel and replacement of new shelves made of 1mm thick MS Sheet made to shape by using suitable nuts & bolts and fixing clips and providing two coat of olive green or silver grey paint over a coat of red oxide primer, all as specified in drg and directed by Engr-in-charge. |
| 7 | (f) Removing of existing unserviceable Door/shutter (Single side only) of Almirah med steel and replacement of new Door/shutter (Single side only) made as per existing MS Sheet , shape and size to be fixing after providing two coat of olive green or silver grey paint over a coat of red oxide primer, all as specified in drg and directed by Engr-in-charge. |
| 8 | (g) All Joints welding & fixing to be done in accordance with the standard workmanship / specification .Smooth surface shall be provide after the welding joints as per drawings and direceted by Engr-in - charge. |
| 9 | REPAIR TO ALMIRAH LARGE STEEL/ALMIRAH 1/2 HANGING 1/2 SHELF : (FD - FD - 67 (M), 1031,114 (M) & 1033,1034, FD/E6/MAP/18)(a) All as per item Srl No 1 here-in-before but Almirah Large Steel / 1/2H 1/2S (3 Way) |
| 10 | (b) All as per item Srl No 2 here-in-before but Almirah Large Steel / 1/2H 1/2S (Lock) |
| 11 | (c)All as per item Srl No 3 here-in-before but Almirah Large Steel / 1/2H 1/2S (Handle) |
| 12 | (d) All as per item Srl No 4 here-in-before but Almirah Large Steel / 1/2H 1/2S (Legs) |
| 13 | (e) All as per item Srl No 5 here-in-before but Almirah Large Steel / 1/2H 1/2S (Shelves) |
| 14 | (f) All as per item Srl No 6 here-in-before but Almirah Large Steel / 1/2H 1/2S (Door single side) |
| 15 | (g) Removing of existing unserviceable conduit pipe of Almirah Large steel 1/2H 1/2 S and replacement of new conduit pipe of size 20mm dia and 1.6 mm thick with appropriate bracket of steel made to shape as shown on drawing and directed by Engineer-in-charge. |
| 16 | (h) All Joints welding & fixing to be done in accordance with the standard workmanship / specification . Smooth surface shall be provide after the welding joints as per drawings and direceted by Engr-in - charge. |
| 17 | REPAIR TO BED HARD PLY TOP :(FD - FD/E6/MAP/08 (R) )(a) Removing of old ply top and replacement of new ply top of 12mm thick commercial type ISI marked with 06 Nos New Nut ,Bolts of size 5mm x 65mmx 2mm thick washers and provided 06 Nos M S Cleat of size 25x60x6mm thick welded with frame for plywood support rest all as shown in Drg. Make- : Century/Archid/Green Ply |
| 18 | (b) Removing of unserviceable 18/19 mm thick pre-laminated particle board of bed hard (Header Only) and replacement of new 18/19mm thick MDF board of size 635mm x 200mm of bed hard ply top (header Only) as per shown in drg and directed by Engr -in-charge. |
| 19 | (c) Removing of unserviceable 18/19 mm thick pre-laminated particle board of bed hard (Footer Only) and replacement of new 18/19 mm thick MDF board of size 635mm x 300mm of bed hard ply top (Footer Only) as per shown in drg and directed by Engr -in-charge. |
| 20 | (d) M & L for fixing of PVC Shoes of bed hard ply top of suitable size and design. |
| 21 | (e) All Joints welding & fixing to be done in accordance with the standard workmanship / specification . Smooth surface shall be provide after the welding joints as per drawings and direceted by Engr-in - charge. |
| 22 | CHAIR VERANDAH : (FD - 256)(a) All Joints welding & fixing to be done in accordance with the standard workmanship / specification . Smooth surface shall be provide after the welding joints as per drawings and direceted by Engr-in - charge. |
| 23 | (b) Removing of old Unserviceable cane from Chair Verandah and Re-Canning with existing type/size of plastic cane complete. |
| 24 | (c) Removing of unsv PVC Shoes of Chair Verandah and replacement of new pvc shoes of suitable size and design. |
| 25 | REPAIR TO CHAIR CB STEEL WIITH / WITH OUT ARMS : (FD-75 (M))(a) Removing unserviceable seats from steel chair with & w/o Arms and Replacement 32 mm thick IInd class hard wood seat as per existing size and shape fixed with suitable bolts, nuts and washer including polishing and recanning with polythene white cane half round as per IS-5378 -1968 1.2 to 2mm wide and .3mm thick for seats and 3 to 3.2mm wide & 0..4mm thick border including supply of cane complete all as directed by EIC. |
| 26 | (b) Ditto-- but steel chair back -do- |
| 27 | (c) Taking out US arms rest from steel chair with arms and Replacement of chair arms rest with suitable bolts, nuts and washer as per specified and Directed by EIC. |
| 28 | (d) Replacement of in repair hard rubber shoe black 20mm dia suitable for bottom of steel chair. |
| 29 | (e) Replacement of in repair hard rubber cap black suitable for 20mm dia at top of steel chair complete. |
| 30 | (f) All Joints welding & fixing to be done in accordance with the standard workmanship / specification . Smooth surface shall be provide after the welding joints as per drawings and direceted by Engr-in - charge. |
| 31 | LOCKER STEEL : (FD-257 & FD-1029)(a) Removing of old broken/ unserviceable conduit pipe and replacement of new conduit pipe of size 20mm dia and 1.6 mm thick with appropriate bracket of steel made to shape as shown on drawing and directed by Engineer-in-charge. |
| 32 | (b) Removing of old deshaped/broken Steel shelf and replacement of new MS Steel shelf of 1 mm thick MS Sheet and fixing it in proper functional position as original shape by using suitable rivets and fixing cleats by providing two coats of OG paint or silver paint over a coat of primer all as specified and directed by Engr-in-charge. |
| 33 | (c) Removing of old broken/ unserviceable existing hasp & staples of Locker steel and replacement new Hasp & Staples of size 75x30x2mm, shape all as shown on drawing and directed by Engineer-in-charge. |
| 34 | (d) Removing of old broken/ unserviceable existing handle of Locker steel and replacement of new handle mild steel chromium plated Make Godraj made to shape all as shown on drawing and directed by Engineer-in-charge. |
| 35 | (e) Removing of old unserviceable legs of Locker steel and replacement of new legs made out of 1mm thick MS sheet made to shape and providing two coat of OG / silver paint over a coat of red oxide primer, all as shown on drawing and directed by Engineer-in-charge. |
| 36 | (f) All Joints welding & fixing to be done in accordance with the standard workmanship / specification . Smooth surface shall be provide after the welding joints as per drawings and direceted by Engr-in - charge. |
| 37 | CHARPOY GI PIPE PLY WOOD TOP : (FD-220)(a) Removing of old ply top and replacement of new ply top of 12mm thick commercial type ISI marked all as shown in Drg. Make- : Century/ Greenply/Archid. |
| 38 | (b) Removing of unserviceable elbow of charpoy GI pipe and Replacement of three way GI elbow 32mm medium grade ISI marked complete all as specified and directed by Engr-in-charge. |
| 39 | (c) Removing of unserviceable check nut of GI Charpoy and Replacement of new check nut 32mm bore 10mm thick suitabkle for charpoi GI pipe 32mm bore Med grade complete all as specified & directed. |
| 40 | (d) Removing the threadless/broken long rails from chairpoy GI pipe 32mm and Replacement of new long rail of 32mm dia GI pipe medium grade 1.88 mtr long threaded at both ends and fixed to existing three way elbow 32mm dia and all shown on drawing. |
| 41 | (e) Taking out existing old broken long rail from chairpoy GI 32 mm dia and providing in position 1 nos short rails made out of broken long rail obtained from taking down above item No 7.4 including threading on both ends complete fixing all as specified and shown on drg (Note : U/S check nuts to be replaced in above item and measured and paid as supply only under relevant items. |
| 42 | (f) Taking out existing old broken short rails from chairpoy GI 32mm dia and providing 01 No new legs in position made out of old broken short rail obtained from taking down above item No 7.5 and Replacement with 3mm thick and 40 mm dia MS plate welded at bottom of leg and complete all as specified and directed by engineer-in-Charge. |
| 43 | (g) Removing the unserviceble M S Flate iron and S & F of new M S Flate iron for supporting of Ply top as per existing size and shape directed by EIC. |
| 44 | CHARPOY IP HARD TOP : (FD - FD/MAP-II/01)(a) Removing of old ply top and replacement of new ply top of 12mm thick commercial type ISI marked with 06 Nos New Nut ,Bolts of size 5mm x 65mmx 2mm thick washers and provided 06 Nos M S Cleat of size 25x60x6mm thick welded with frame for plywood support rest all as shown in Drg. Make- : Century/Archid/Green Ply |
| 45 | (b) Removing of unsv PVC Shoes of Charpoy IP hard Top and replacement of new pvc shoes of suitable size and deigen. |
| 46 | (c) All Joints welding & fixing to be done in accordance with the standard workmanship / specification . Smooth surface shall be provide after the welding joints as per drawings and direceted by Engr-in - charge. |
| 47 | CHAIR SCHOOL STEEL WITH HAND BOARD : (FD - FD/E6/MAP/05)(a) Removing of Old Unsv connected PVC Seat Back and Replacement of New PVC Sheet Back as per size and design or directed by EIC. |
| 48 | (b) Replacement of PVC Shoes of Chair School Steel with Hand Board of suitable size and design. |
| 49 | (c) Removing of old/unserviceable Hand board and Replacement of new hand boad made of pre laminated MDF Board with teak wood beading all around as per shape and size as drawing and directed by EIC. |
| 50 | (d) All Joints welding & fixing to be done in accordance with the standard workmanship / specification . Smooth surface shall be provide after the welding joints as per drawings and direceted by Engr-in - charge. |
| 51 | RACK SHOE STEEL : (FD - FD/E6/MAP/02(R)(a) Replacement of mesh of Shoe Rack steel made with 3mm dia MS Rod at Equidistant with all around 20mm dia MS Pipe welding to legs as per drawing and design or directed by EIC. |
| 52 | (b) Removing existing unserviceable Main Frame parts (Leg) of Shoe Rack Steel and Replacement of new Main Frame parts (Legs) made of 25mm dia (18 Guage) Round pipe by running welding all as specified and directed by Engr-in-charge. |
| 53 | (c) Replacement of PVC Shoe of Shoe Rack Steel of suitable size as per drgs and directed by EIC. |
| 54 | (d) All Joints welding & fixing to be done in accordance with the standard workmanship / specification . Smooth surface shall be provide after the welding joints as per drawings and direceted by Engr-in - charge. |
| 55 | REPAIR TO TABLE STEEL 900 X 900 X 760 MM : (FD - 291)(a) Removing of U/S top and Replacement of new top18/19mm thick Prelaminated MDF board exterior grade ISI Marked both side finish teak wood colour with 4 mm thick T.W beading all-round the table steel 900x900x760mm as per directed by EIC. |
| 56 | (b) Removing existing unserviceable parts (Legs) of table 900 x 900 x 760mm Steel and Replacement of new parts (Legs) made of square pipe of 25mm x 25mm and 1.6 mm thickness by running welding all as specified and directed by Engr-in-charge. |
| 57 | (c) Replacement of rubber shoe with S&F new rubber shoe of superior quality with suitable size complete all as directed by Engr-in Charge. |
| 58 | (d) All Joints welding & fixing to be done in accordance with the standard workmanship / specification . Smooth surface shall be provide after the welding joints as per drawings and direceted by Engr-in - charge. |
| 59 | REPAIR TO TABLE STEEL 900 x 600 x 760 MM WITH DRAWER/W/OUT DRAWER : (FD -1007 , 1008)(a) Removing of U/S top and Replacement of new top18/19mm thick Prelaminated MDF board exterior grade ISI Marked both side finish teak wood colour with 4 mm thick T.W beading all-round the table steel 900x600x760mm with drawer and w/o drawer as per drgs and directed by EIC. |
| 60 | (b) Taking out old U/S drawer and Replacement of new drawer made of 1mm thick MS Sheet as specified and shown on Drg and directed by Engr-in-Charge. |
| 61 | (c) Removing existing unserviceable parts (Legs) of table 900 x 600x760mm Steel with drawer & w/o drawer and S&F new parts (Legs) made of square pipe of 25mm x 25mm and 1.6 mm thickness by running welding all as specified and directed by Engr-in-charge. |
| 62 | (d) Replacement of rubber shoe with S&F new rubber shoe of superior quality with suitable size complete all as directed by Engr-in Charge. |
| 63 | (e) All Joints welding & fixing to be done in accordance with the standard workmanship / specification . Smooth surface shall be provide after the welding joints as per drawings and direceted by Engr-in - charge. |
| 64 | TABLE OFFICE CLERK STEEL : (FD - 84, 307,321)(a) Removing of U/S top and Replacement of new top18/19mm thick Prelaminated MDF board exterior grade ISI Marked both side finish teak wood colour with 4 mm thick T.W beading all-round the table office clerk steel as per drgs and directed by EIC. |
| 65 | (b) Removing existing unserviceable parts (Legs) of table office clerk steel and S&F new parts (Legs) made of square pipe of 25mm x 25mm and 1.6 mm thickness by running welding all as specified and directed by Engr-in-charge. |
| 66 | (c) Taking out old U/S drawer and Replacement of new drawer made of 1mm thick MS Sheet as specified and shown on Drg and directed by Engr-in-Charge. |
| 67 | (d) All Joints welding & fixing to be done in accordance with the standard workmanship / specification . Smooth surface shall be provide after the welding joints as per drawings and direceted by Engr-in - charge. |
| 68 | (e) Replacement of rubber shoe with S&F new rubber shoe of superior quality with suitable size complete all as directed by Engr-in Charge. |
| 69 | TABLE OFFICE OFFICER STEEL : (FD - 1003)(a) Removing of U/S top and Replacement of new top18/19mm thick Prelaminated MDF board exterior grade ISI Marked both side finish teak wood colour with 4 mm thick T.W beading all-round the table office officer steel as per drgs and directed by EIC. |
| 70 | (b) Removing existing unserviceable parts (Legs) of table office officer steel and S&F new parts (Legs) made of square pipe of 25mm x 25mm and 1.6 mm thickness by running welding all as specified and directed by Engr-in-charge. |
| 71 | (c) Taking out old U/S drawer and Replacement of new drawer made of 1mm thick MS Sheet as specified and shown on Drg and directed by Engr-in-Charge. |
| 72 | (d) All Joints welding & fixing to be done in accordance with the standard workmanship / specification . Smooth surface shall be provide after the welding joints as per drawings and direceted by Engr-in - charge. |
| 73 | (e) Replacement of rubber shoe with S&F new rubber shoe of superior quality with suitable size complete all as directed by Engr-in Charge. |
| 74 | CHARPOY FOLDING HARD TOP : FD - 388(R)(a) Removing of old ply top and replacement of new ply top of 12mm thick commercial type ISI marked all as shown in Drg. Make- : Century/Greenply/Archid. |
| 75 | (b) All Joints welding & fixing to be done in accordance with the standard workmanship / specification . Smooth surface shall be provide after the welding joints as per drawings and direceted by Engr-in - charge. |
| 76 | (c) Removing of unsv PVC Shoes of Charpoy IP hard Top and replacement of new pvc shoes of suitable size and design. |
| 77 | BED HARD PLYWOOD TOP : (FD - 246 & 247)(a) Removing of old unserviceable Head rest of bed and replacement of new Head rest as per existing size and shape of Ist class hard wood incl polishing (two or more coats) over a coat of wood filler after preparation of surface. |
| 78 | (b) Removing of old unserviceable foot rest of bed & replacement of foot rest made as per existing size and shape or as per Drg Ist class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface. |
| 79 | (c) Removing of old ply top and replacement of new ply top of 12mm thick commercial type ISI marked all as shown in Drg. Make- : Century/Greenply/Archid/Kitply. |
| 80 | (d) Removing of old wooden stiffener and replacement of new wooden stiffner of Ist class Hard wood stiffener of size 50x60mm suitable for bed all as shown in Drg incl polishing two or more coats of wood filler after preparation of surface etc. |
| 81 | (e) Taking out old unsv long rail of bed plywood and replacement of new long rail of Ist class hard wood of existing shape and size all as specified and Drg incl polishing two or more coats over a coat of wood filler after preparation of surface etc. |
| 82 | CHAIR DINNING & CHAIR DINNING MAP : (FD-228 / 279 & FD/MAP-II/05) (a) Repair and Replacement of front leg (left or right ) made out with 1st class Hard Wood of size and shape as per existing chair. |
| 83 | (b) Ditto- all as per item No 81 above but rear leg (left or right). |
| 84 | (c) Ditto- all as per item No 81 above but Front/Rear/Side rail. |
| 85 | (d) Ditto- all as per item No 81 above but back stiffener of Chair Dinning |
| 86 | (e) Description all as per item 81 here in before but replacement of PVC shoes with new PVC shoe of superior quality with steel screw of suitable size complete. |
| 87 | (f) Re-canning of chair dining. |
| 88 | (g) Description all as per item 81 here in before but replacement of PVC Seat with New PVC Seat of superior quaility with steel screw suitable size of chair dinning. |
| 89 | (h) S & F New 25 x 3mm Flat iron in (two Nos in Each Chair) 38mm long to the bottom base of PVC Seat for the durability of PVC Seat all as per directed by Engr-in charge. |
| 90 | CHAIR EASY : (FD - 229) (a) Repair and Replacement of front leg (left or right ) made out with 1st class Hard Wood of size and shape as per existing Chair. |
| 91 | (b) Ditto - as per item 89 above but Rear leg (left and right). |
| 92 | (c) Ditto - as per item 89 above but Arms rest. |
| 93 | (d) Ditto - as per item 89 above but front/rear rail for seat. |
| 94 | (e) Ditto as per item 89 above side rail for back. |
| 95 | (f) Replacement of shoes with new PVC shoe of superior quality with steel scre of suitable size complete. |
| 96 | (g) Re-canning of chair easy (Seat & Back) |
| 97 | CHAIR WRITING : (FD - 280)(a) Repair and Replacement of front leg (left or right ) made out with 1st class Hard Wood size and shape as per existing chair. |
| 98 | (b) Ditto- all as per item 96 above but rear leg (left or right) . |
| 99 | (c) Ditto-- all as per item 96 above but back stiffener. |
| 100 | (d) Ditto-- all as per item 96 above but bottom stiffener. |
| 101 | (e) Repair and Replacement of Arm rest made out with Ist class Hard Wood of size and shape as per existing chair. |
| 102 | (f) Description all as per item 96 here in before but replacement of shoes with new PVC shoe of superior quality with steel screw of suitable size complete. |
| 103 | (g) Re canning of chair writing. |
| 104 | CHAIR DINNING LONG BACK WITH CUSHIONED : (FD - 357)(a) Repair and replacement of front leg (left or right ) made out with1st class Hard Wood size and shape as per existing chair or as per Drg all as directed by Engineer-in-Charge. |
| 105 | (b) Ditto - all as per item No 103 above but Rear leg (left or right ) all as directed by EIC. |
| 106 | (c) Ditto - all as per item No 103 above but Side Rail . |
| 107 | (d) Ditto - all as per item No 103 above but front Rail. |
| 108 | (e) Ditto - all as per item No 103 above but Bottom stiffner. |
| 109 | (f) Replacement of unserviceable cushioned with seat and new seat top of chair dinning with 75 mm thick 32 density foam covered with approved tapestry cloth and on seat of 12 mm commercial plywood BWP grade. Make- Century/Kitply/National ply including tightening of frame work as shown on drg. |
| 110 | (g) Ditto - all as per item No 103 above but Back Rest. |
| 111 | (h) Replacement of unserviceable pvc shoes of chair dining with new one with scew of superior quality all as shown on drg. |
| 112 | (j) Replacement of old tapestry cloth with new tapestry cloth for seat and back of Chair dinning of superior quality and fixing appropriatly as shown on drg. |
| 113 | REPAIR TO DRESSING MIRROR GENTS : (FD - FD/E6/MAP/16)(a) Removing of Old unsv/ Broken looking Mirror from Dressing Mirror Gents and S&F New looking Mirror 5mm thick for Dressing Mirror Gents as shown in drgs with 4mm thick 1st class Hard wood teak beading all around the mirror with suitable size of screws complete are as shown in drg and directed. |
| 114 | (b) Removing of old broken shelves of Dressing Mirror Gents and S&F 5 mm Plain Glass including aluminium brackets for holding the shelves all as shown in drgs and directed. |
| 115 | (c) Magnatic catch spring for shutter. |
| 116 | (d) Removing of old unserviceable Back ply of Dressing mirror Gents and S &F New plywood of dressing mirrro Gents size and shape as per drawing and direceted by Engr-In-Charge. |
| 117 | (e) Removing of old unsv side of Dressing Mirror Gents and S&F of New sides made of Pre laminatied particale board of 18/19mm as per existing size and shape shown in drawing and directed by Engr In Charge. |
| 118 | (f) Removing of old unservicable top/Bottom side of dressing mirror and S&F New Side for top/bottom made of 18/19mm pre laminated Particale board of Dressing mirror Gents as per size and shape shown in drawing and directed by EIC. |
| 119 | REPAIR TO SOFA SET 5 / 4 / 3 /1 SEATER : (FD- 281)(a) Removing of existing U/S cushion from sofa set five/four/Three /One seater and S&F new foam cushion seat Make-sleepwell/Godrej 95 to 100 mm thick 40 density duly covered with superior quality approved tapestry cloth (Not less than Rs. 250/P Mtr) as directed by Engr-in-Charge. |
| 120 | (b) Removing of existing old tapestry cover from cushion for sofa set five/four/Three /One seater and S&F new approved tepestry cover Per seat as directed by Engr-in-Charge. |
| 121 | (c) Removing of existing U/S front/rear rail wooden of sofa set 5 seater and S&F new Front/Rear wooden rail made of IInd class hard wood and polishing with french polish two or more coats over a coat of woodfiller after preparation of surface and as directed by Engr-in-Charge. |
| 122 | (d) Removing of existing U/S stiffner/bearer wooden and S&F new stiffner/bearer wooden made of 1st class hard wood and polishing with french polish two or more coats over a coat of woodfiller after preparation of surface and as directed by Engr-in-Charge. |
| 123 | (e) Removing of existing U/S Arm rest wooden and S&F new Arm rest wooden made of 1st class hard wood and polishing with french polish two or more coats over a coat of wood filler after preparation of surface and as directed by Engr-in-Charge. |
| 124 | REPAIR TO TABLE 900 X 600 X 760MM : (FD - 283 & 284) (a) Removing of old unserviceable table top and provision of new table top made of pr-laminated MDF board 18/19mm thick BWR, ISI Marked including 4 mm thick teak wood beading all round the table top as specified and shown on drawing and as directed by Engr-in-charge. |
| 125 | (b) Removing of old unserviceable leg and replacement of new leg of existing shape and size 1st class hard wood and fixing as shown in drawing and as directed by Engr-in-charge. |
| 126 | (c) Removing of old unserviceable long rail and replacment of new long rail of existing shape and size1st class hard wood and fixing as shown in drawing and as directed by Engr-in-charge. |
| 127 | (d) Removing of old unserviceable Short rail and replacment of new Short rail of existing shape and size1st class hard wood and fixing as shown in drawing and as directed by Engr-in-charge. |
| 128 | (e) Replacement of shoes with new PVC shoe of superior quality with steel screw of suitable size complete. |
| 129 | TABLE WRITING : (FD - 275)(a) Removing old unserviceable top and replacement of new top made of Prelaminted MDF board 18/19mm thick commercial BWR Gde I of the size and shape a per Drg ISI Marked with IInd class HW teak wood beading 6mm thick polishing with french polish (two or more coats) over a coat of wood filler etc. |
| 130 | (b) Removing of old unserviceable back ply of table writing and replacement of new back of 6mm thick ply wood commercial type as per existing shape and size complete all as specified and shown on drawing . Make - Century/ Greenply/Archid. |
| 131 | (c) Removing old unserviceable leg of tables & Replacement with new leg made out with 1st class hard wood all as per Drg or of exsiting pattern polishing with french polish (two or more coats) over a coat of wood filler etc. |
| 132 | (d) Removing of old unserviceable Drawer of Table writing and S&F New Drawer of Table writing as per existing shape and size or as per drawing and directed by Engr-in-charge. |
| 133 | (e) Replacement of unserviceable pvc shoes of chair dining with new one with scew of superior quality all as shown on drg. |
| 134 | REPAIR TO TABLE DINING 6 PERS : (FD - 273)(a) Taking out old unsv top from table dining 6 pers and replacement of new top of 18/19 mm thick pre laminated MDF board exterior grade and provided teak wood beading 4 mm thick around fixed with suitable size 4 mm thick around fixed with suitable size of steel screw and applying two coat of French polish with touch wood brand polish and fixing the same all as specified and shown in drg and all as directed. |
| 135 | (b) Taking out old unsv leg from table dining 6 /8 pers and repalcement of new leg of 1st Class hard wood all as shown on drg and directed by EIC. |
| 136 | (c) Taking out old unsv long rail from table dining 6 pers and replacement of new long rail of 1st class hard wood all as shown on drg and directed by EIC. |
| 137 | (d) Taking out old unsv short rail from table dining 6/8 pers and replacement of new short rail of 1st class hard wood all as shown on drg and directed by EIC. |
| 138 | REPAIR TO TABLE DINING 8 PERS : (FD - 273)(a) Taking out old unsv top from table dining 8 pers and replacement of new top of 18/19 mm thick Pre laminated MDF Board exterior grade and provided teak wood beading 4 mm thick around fixed with suitable size 4 mm thick around fixed with suitable size of steel screw and applying two coat of French polish with touch wood brand polish and fixing the same all as specified and shown in drg and all as directed. |
| 139 | (b) Taking out old unsv long rail from table dining 8 pers and replacement of new long rail of 1st class hard wood all as shown on drg and directed by EIC. |
| 140 | TABLE DINING 120 cm x 90 cm : (FD - FD/MAP/E6/03 ) (a) Replacement of Top of size 120 cm x 90 cm made of 18/19 mm thick Wood colour MDF board of approved shade including 4 mm thick teakwood edging all-around. |
| 141 | (b) Replacement of Leg made of 1st class hardwood of size and shape as per drg. |
| 142 | (c) Replacement of Short rail of size and shape as per drg. |
| 143 | (d) Replacement of Long rail of size and shape as per drg. |
| 144 | (e) Replacement of New PVC shoes with steel screw of suitable size complete. |
| 145 | Table Bed Side : (FD - FD/E6/MAP/15(R)(a) Replacement of New Top of Table bed side made of pre laminated partical board of 18/19mm mm thick of existing shade including 4 mm thick teakwood edging alround. |
| 146 | (b) Replacement of Side of Table bed side made of pre laminated partical board of 18/19mm mm thick of existing shade and directed by Engr in charge. |
| 147 | (c) Replacement of bottom of Table Bed Side made of 06 mm ply wood all as per drgs and directed by EIC. |
| 148 | (d) Replacement of Back of Table Bed Side made of 6 mm thick ply wood and 18 mm thick prelaminated paticle board piece in between the frame as per drg and directed by Engr in charge. |
| 149 | (e) Replacement of Top Drawer of Table Bed Side made of 18 mm thick partical board with 6 mm thick ply wood bottom as per drawing. |
| 150 | (f) Replacement of Lower Drawer of Table Bed Side made of 18 mm thick partical board with 6 mm thick ply wood bottom as per drawing. |
| 151 | (g) Replacement of Handle of size 75 mm of superior quaility for table bed side. |
| 152 | (h) Replacement of unserviceable telescopic channels with new telescopic channel and fixing as directed by EIC. |
| 153 | (j) Replacement of PVC Shoe of existing shape and size as per drawing and directed by EIC. |
| 154 | REPAIR TO PEG TABLE : (FD - 277) (a) Removing unserviceable top of Peg table but repalcement of new top of 18/19mm thick wood colour MDF Board as per Drg ISI Marked as specified and shown on Drg and as directed by Engr-in-Charge. |
| 155 | (b) Removing unserviceable/broken leg of peg table and repalcement of new leg made of Ist class hard wood all as per Drg or existing pattern and polishing with french polish (Two or more coats) over acoat of wood filler after preparation of surface etc. |
| 156 | (c) Taking out old unserviceable/broken long rail of frame and replacement of new long rail of Ist class hard wood planned & finishing smooth of existing shape and size complete all as specified. |
| 157 | (d) Description all as per Item No 155 above but short rail. |
| 158 | (e) Description all as per Item No 155 above but PVC Shoe with Suitable size of screw. |
| 159 | REPAIR TO TABLE CENTRE : (FD - 274) (a) Taking down old unserviceable top of table centre and replacement of new top of table centre made of 18/19 mm thick pre-laminated wood colour MDF board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on Drg and as directed by Engr-in-Charge. |
| 160 | (b) Removing of old unserviceable long rail of Table Centre & replacement of new long rail made as per existing size and shape or as per Drg 1st class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface. |
| 161 | (c) Removing of old unserviceable Short Rail of Table Centre & replacement of new short Rail made as per existing size and shape or as per Drg 1st class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface. |
| 162 | (d) Removing of old unserviceable leg of Table Centre & replacement of new leg made as per existing size and shape or as per Drg IInd class hard wood incl polishing two or more coats of over a coat of wood filler after preparation of surface. |
| 163 | (f) Discription all as per item No 161 but PVC Shoes with suitable size of screw. |
| 164 | TABLE DRESSING LADIES WITH CUSHIONED STOOL : (FD - FD/MAP-II/07) (a) Replacement of Looking Mirror with frame of 5mm thick of appropriate size along with 6mm thick commercial plywood back of the mirror and minor repairs during dismantling unserviceable one all as per drgs and directed by EIC. |
| 165 | (b) Removing of old Unserviceable Handle and replacement of New SS Handle 75mm with round shape and directed by EIC. |
| 166 | (c) Removing of old Unservicable Channel and replacement of New Telescopic Channel for Drawer of Table Dressing Ladies as per size and drawaing /directed by EIC. |
| 167 | (d) Removing of Unserviceable Door for shelf and replacement of New door for Shelf with 100 mm hinges as per exisiting size and shape or directed by Engr in Charge. |
| 168 | (e) Removing of old unserviceable existing top with Cushion seat of Stool Dressing and replacement of new top of 12mm commercial plywood openable and cushion seat as shown on drawing. Seat of the stool shall be 75 mm high made of foam wtih 40 density covered tapestry cloth as approved by Engr in Charge. |
| 169 | (f) Removing of old broken unserviceable existing heavy duty revolving nylone double wheels from stool cushioned and S&F new heavy duty nylone double wheels in stool cushioned as per drgs and directed by EIC. |
| 170 | (g) Removing of old unserviceable sides and replacement of new sides of stool dressing as per exisiting shape and size or as per drawing and directed by EIC. |
| 171 | TEAPOY WOODEN : (FD - 278,382)(a) Removing unserviceable top of Teapoy Wooden but repalcement of new top of 18/19mm thick wood colour MDF Board as per Drg ISI Marked as specified and shown on Drg and as directed by Engr-in-Charge. |
| 172 | (b) Removing unserviceable/broken leg of Teapoy Wooden and repalcement of new leg made of Ist class hard wood all as per Drg or existing pattern and polishing with french polish (Two or more coats) over acoat of wood filler after preparation of surface etc. |
| 173 | (c) Taking out old unserviceable/broken long rail of frame and replacement of new long rail of Ist class hard wood planned & finishing smooth of existing shape and size complete all as specified. |
| 174 | (d) Description all as per Item No 172 above but short rail. |
| 175 | (e) Description all as per Item No 172 above but PVC Shoe with Suitable size of screw. |
| 176 | M & L for High Glossy french Polishing the following wooden furniture with one or more coats as required with high glossy finish including filling of holes & cracks with bees wax, chalk powder and smoothing with sand paper befor polishing and as per directed by EIC. (Make : Asian / Shalimar / Berger) |
| 177 | (a) Bed Ply Top with MNF Set |
| 178 | (b) Chair Dinning and Chair Dinning PBOR |
| 179 | (c) Chair Easy |
| 180 | (d) Chair Writing |
| 181 | (e) Chair Dinning Long Back with cushioned |
| 182 | (f) Dressing Mirror Gents |
| 183 | (g) Hat Stand with Mirrror |
| 184 | (h) Sofa set 5/4/3/2/1 seater (Qty to be counted as per seat) |
| 185 | (j) Peg Table |
| 186 | (k) Table Center |
| 187 | (l) Table Dinning Six / Eight Pers |
| 188 | (m) Table Writing |
| 189 | (n) Table Dressing Ladies |
| 190 | (o) Table Dinning 120cm x 90 Cms |
| 191 | (p) Table Bed Side |
| 192 | (q) Table 900 x 600 x 760 mm |
| 193 | M&L for scrubbing and derusting, denting of de-shaped portion and applying one coat of primer and over it two coat of synthetic enamel grey hammer paint/Black/White (spray painting) incl preparation of surface all as directed by EIC for the following :- |
| 194 | (a) Table office clerk steel |
| 195 | (b) Table Office officers steel |
| 196 | (c) Table 900X600 steel with drawer & w/o drawer |
| 197 | (d) Table steel 900X900mm |
| 198 | (e) Chair CB steel with or without arms |
| 199 | (f) Almirah large steel with shelves & 1/2 H x 1/2 S (Inner Side) |
| 200 | (g) Almirah large steel with shelves & 1/2 H x 1/2 S (Outer Side) |
| 201 | (h) Almirah med steel with shelves (Inner Side) |
| 202 | (j) Almirah med steel with shelves (Outer Side) |
| 203 | (k) Locker steel (Inner Side) |
| 204 | (l) Locker steel (Outer Side) |
| 205 | (m) Chair Verandah |
| 206 | (n) Bed hard Ply top |
| 207 | (o) Charpoy IP Hard Top |
| 208 | (p) Charpoy folding Hard Top |
| 209 | (q) Chair Steel school with hand board |
| 210 | (r) Rack Shoe Steel |
| 211 | (s) Side Rack with tray steel 4 spaces |
| 212 | (t) Table Bed Side |
| 213 | (u) Chair steel with spl Hand Rest |
| 214 | (v) Rack Steel Three Tier Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender