Tender For General-General Rm-2026-27- Rc-1 Zone-1 Melukavuroad Section-General Rm-2026-27- Rc-1 Zone-1 One Year Running Contract For Various Pwd Road Under Road Section Melukavu In Kottayam District,5 Roads For A Total Length Of 17.505 Km-General Ci
Tender Value
64.32 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kottayam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-General Rm-2026-27- Rc-1 Zone-1 Melukavuroad Section-General Rm-2026-27- Rc-1 Zone-1 One Year Running Contract For Various Pwd Road Under Road Section Melukavu In Kottayam District,5 Roads For A Total Length Of 17.505 Km-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Part A Reactive Maintenance |
| 2 | OD84912/2026-2027:Providing and fixing vynyl sticker including lettering and symbols for existing DLP Board 1.22 m x 0.61m size including painting all exposed surface with two coat of epoxy painting etc. |
| 3 | OD11231/2026-2027:Fill ing up potholes with bituminous ready mix compound (25kg bag) and compacting byramming to get a compact surface including of cost of material,laying charges, transportation to site etc. complete rate is arrived for a bag of 25kgAssuming a average of 30 bags of 25 kg ready mix compound will be laid in potholes in a day |
| 4 | 55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete. |
| 5 | 55.10.1:Providing and erecting retro-reflectorised Object Hazard Marker 300mm x 900mm <br>Providing and erecting retro-reflectorised Object Hazard Marker sign with 07 years warranty, manufactured as per IRC 67 USING Type IV ASTM D 4956-09 micro prismatic retro reflective sheeting fixed over aluminium sheetig, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back support frame and supported on a mild steel angle iron post 75mmx75mmx6mm, firmly fixed 30cm above ground level by means of properly designed foundation with M 15 grade cement concrete 30cmx30x45cm, 45cm below ground level including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer as per approved drawing and clause 801.<br>300 mm x 900 mm |
| 6 | 8.4.12:Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminum sheeting, 2 mm thick/aluminum composite material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 50cmx 60 cm rectangular (Single chevron etc.) |
| 7 | Part B Proactive Maintenance |
| 8 | 55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement. |
| 9 | 55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface. |
| 10 | 55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a) |
| 11 | 55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface. |
| 12 | 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 13 | OD75796/2026-2027:Mix Seal Surfacing providing ,laying and rolling of close graded premix surface material of20mm thickness composed of 11.2mm to .09mm (Type A) or 13.2mm to 0.9mm (TypeB)aggregates using penetration grade bitumen using VG 30 to the required line ,grade and level to serve as wearing course on a previously prepared base ,including mixing in a suitable plant ,laying and rolling with a three wheel 8-10KN static roller and finishing to required level and grades as per Technical specification Clause 509 of MORD - Bitumen @ 22.00kg/10m2By Manual Means |
| 14 | OD11232/2026-2027:Fill ing up potholes with bituminous ready mix compound (25kg bag) and compacting byramming to get a compact surface including of cost of material,laying charges, transportation to site etc. complete rate is arrived for a bag of 25kgAssuming a average of 30 bags of 25 kg ready mix compound will be laid in potholes in a day |
| 15 | 12.8.A.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. <br> PCC Grade M15 <br> |
| 16 | 8.15:Supplying and installation of delineator (Roadway indicators) posts 80- 100cm high above ground level, pained black, and white in 15 cm wide strips, fitted with min. 80 x 100 mm rectangular or 75 mm dia circular retro reflectorized panels at the top with minimum visibility of 300m with provisions to prevent edge lifting and vandalisam, and conforming to clause 806 , IRC-79 and the drawings including fixing to ground (The deleniator shall be of approved type as per specification) |
| 17 | Part C Premonsoon works |
| 18 | OD353324/2025-2026:Engaging man mazdoor for clearing blockage of culverts, placing in position of covering slab, assisting etc |
| 19 | 2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area |
| 20 | OD353322/2025-2026:Engaging Tipper for carrying out excess soil |
| 21 | OD353325/2025-2026:engaging hydraulic excavator for excavating excess soil and maintaining the berm |
| 22 | 2.1.1:Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit. Girth from 300 mm to 600 mm |
| 23 | 2.3.2.A:Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness In area of light jungle - By Mechanical Means |
| 24 | Part D Routine Inspection |
| 25 | OD353315/2025-2026:Engaging labour with passenger car not less than1000cc for conducting and reporting routine inspections for the entire length of project road at a frequency of 7 days through out the agreement period of Running Contract as directed by the department officers. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender