Tender For Biennial Electrical & Mechanical Maintenance For Machine No. 1 Of Belka Power House & Machine No. 01 & 02 Of Babail Power House.
Tender Value
19 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
16 days left
EMD
38000
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Biennial Electrical & Mechanical Maintenance For Machine No. 1 Of Belka Power House & Machine No. 01 & 02 Of Babail Power House.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Turbine main hole cover and Guide bearing bulb. |
| 2 | Dismantling of Turbine guide bearing and its shaft. |
| 3 | Dismantling of Throat ring. |
| 4 | Dismantling of Rotor and Stator |
| 5 | Dismantling of Runner hub with blade. |
| 6 | Dismantling of Turbine main hollow shaft. |
| 7 | Dismaintling of all 16 Nos. wicket gates with locking Assembly and its bush, cup seals etc. |
| 8 | Complete dismantling of Gear Box, removal of all the 06 Bearings attached with Bull Gear and Pinion Gear alongwith proper checking of Gear Assembly, condition of all 06 Bearings and Bearing Bores in Gear Box frame. Also supply and fixing of Gear Box oil seals complete in all respects for machine no. 01 & 02 of Babail Power House. |
| 9 | Cleaning,greasing of all wicket gates locking assembly alongwith replacment of both end bushes,SS pins,bolts,Cup seals & \\"O\\" rings, etc. |
| 10 | Replacement of all required nuts,bolts & studs of required sizes in place of rusted/damaged nuts and bolts. |
| 11 | Dehydration of oil of various Auxillary, Excitation, Current & Potential Transformers at Belka Power House. |
| 12 | Centrifushing of transformer oil till the BDV is acheived as per IS (1900 Ltr.) |
| 13 | Replacement of HV side bushing with gasket etc. |
| 14 | Replacement of LV side bushing with gasket etc. |
| 15 | Replacement of breather (plastic frame) with silica gel. |
| 16 | Varnishing of stator and rotor after Dry out & proper cleaning of rotor and Stator. |
| 17 | Removal of old painted and rusted surface of both sides of turbine & Turbine bulb inside with wire brush ,emery paper.Dirt,silt,grease and oil shall be removed with the use of aromatic solvent and de-greasing solvent for preparation of surface for one coat ready mixed EPHEX-4 epoxy primer then application of EPHEX-5 coltar epoxy paint in two coat including supply of all labour T&P etc. |
| 18 | Scrapping and cleaning old painted surface with wire brush, Sand paper etc. Painting one coat of ready mixed priming paint and two coat of approved superior quality ready mix Automotive paint on Turbine & Generator complete including Supply of all material labour T and P etc. required for proper completion of work. Paint to be used should confirm to the ISI. |
| 19 | Painting of single coat primer with double coat ready mixed paint of 2000KVA transformer after removing old paint & primer. |
| 20 | Fitting of all wicket gate with assembly. |
| 21 | Fitting of bearing shaft and turbine guide bearing. |
| 22 | Fitting of Stator and rotor |
| 23 | Fitting of runner hub with runner blade. Re-assembly of Throat ring. |
| 24 | Closing of TGB bulb and main hole cover. |
| 25 | Alignment of turbine guide bearing ,Turbine main shaft, Stator &rotor with gear box & with generator. Crompton make MCCB, 250V, 40Amp, Cap.-10KA Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender